Heating mat - Import export

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable and cold lead, length to customer specification, up to 180 m possible. Heating mats from Klöpper Therm work against the penetration of cold in to the ground and prevent upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

With our textile-based electric elements we offer a better solution for surface heating in comparison to classic silicone heater. Our elements heat up to 200°C, and they are lightweight and cost-efficient. We are capable of manufacturing components of sizes up to 2.140 x 1.800 mm. Please contact us to receive an offer.

We manufacture customized heating mats based on carbon filaments & roving in all sizes and for all voltages!

Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.

How do we improve the durability and performance of products? Through our production of heating mats for lithium-ion batteries and other batteries, we also indirectly contribute to the conservation of resources. In this way, the batteries are better protected against strong or fluctuating temperature influences. This means that they are less prone to failure and have a significantly longer service life and performance. Preheating, warm up or heating in continuous operation The heating mats are equipped with a performance tailored to the customer and regulate the temperature of the batteries and rechargeable batteries according to the necessary conditions. With optional equipment such as self-adhesive foil (one-sided or double-sided foil lamination), these can be attached to the battery or the block super easily. Application ✔️ in electric cars & hybrid vehicles ✔️ for electric commercial vehicles ✔️ for electric industrial trucks ✔️ other battery-powered industrial applications

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces

Aramid fibers are suitable for very demanding applications and they are widely used in the firefighting industry (manufacturing of firefighters’ clothing) because of their flame retardant properties. Aramid is not only fireproof, the aramid fibers also have a high tensile strength, which is why they are often used for bulletproof vests (military and police) or for armoring selected emergency vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

Flexible Polyester Heaters consist of a conductive ink between two insulation layers of polyester. The heater can be pressed on or fixed with a self-adhesive foil. Wrapped in PVC the use in liquids is possible as well. Typical standard applications are e.g. mirror heaters, water bed heaters, or low temperature room heaters. For terrarium and aquarium heaters we offer standard elements as well.

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable – completely embedded in a hard PVC film – and cold lead, length to customer specification, up to 180 m possible. The approved heating mat developed by Klöpper Therm works against the penetration of cold in to the ground and prevents upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas!

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable, cold lead and temperature sensors. Concrete floor heatings from Klöpper Therm are the optimum protection against dangers from black ice in cold stores. Concrete brings heat from outside into the cooling chamber. Thereby the temperature of the concrete along the heat flow falls to the temperature of the cooling chamber. The moisture stored in the warmer air condenses on the cold concrete surface through which black ice can form. Dangers through the exchange of warmer and colder air arise particularly in the area of locks. When, through repeated opening of the doors, condensation from the walls and ceilings falls on the floor and black ice forms, it can lead to accidents. In consequence of the effects of permanent cold, doors can freeze solid at the seals and be severely damaged.

Silicone heaters and Kapton heaters are preferred surface heating elements for laboratory equipment and medical technology due to their easy handling and variety of shapes. Like Kapton polyimide heating foils, silicone heaters are resistant to continuous temperatures of up to 200 °C, with self-adhesive foil up to 180 °C. When designing silicone heaters and Kapton foil heaters, the designer has almost unlimited degrees of freedom. This applies to the minimum and maximum dimensions, which are set within wide limits, as well as to contours and recesses, holes and feed-throughs of any kind. The good shape flexibility of silicone heating mats and foils as well as Kapton polyimide heaters also enables the heating of cylindrical, conical or rounded surfaces. The resistance of polyimides to fungi, bacteria, ozone, weather, ageing and most chemicals, acids and solvents is very good, making polyimide (Kapton) heaters an ideal solution for many critical applications.

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.