Heat covers - Import export

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.

Sound insulation for heat pumps: A customised, made-to-measure enclosure can help to significantly reduce noise from heat pumps and thus provide more peace and quiet in the neighbourhood. If you want to install a heat pump, you should therefore consider using an enclosure. Self-assembly with assembly instructions possible. We supply also in larger quantities to OEMs.

Hose cover against radiant heat maximum 450 ° C. Outside with aluminum foil and inside with glass silk or Kevlar fabric. Closed or with Velcro for quick installation and removal.

Preformed connecting element to handle gasses, liquids with solid content, or highly abrasive solids in the suction and pressure field. Outstanding as a substitute for steel arches or steel funnels with longer service lives. Temperature resistant from –40°C to +260°C depending on the application. Construction: Special quality tube depending on the medium Tension and pressure-resistant fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned optional: embedded steel rings or steel spiral optional: heat protection cover optional: antistatic version optional: wall reinforcement at bends In fixed lengths. The tooling to produce connecting elements is produced in our tooling shop according to customer drawings. Other versions and dimensions on request.

CSN® screwin heating units are particularly suitable for the direct heating of liquids, air and gases. In relation to the process, we provide you with screwin or tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. The surface loadings, a very critical design feature for the longterm durability of the elements, are calculated for their specific application. For exact temperature monitoring, the screwin heating units can be manufactured with various controllers and / or limiters, as well as PT100 sensors or sheath thermocouples. Our team also looks forward to standing by your side if you need heating solutions which cannot be covered with socalled standard solutions. We are happy to develop processcustomised solutions in close consultation with you. We look forward to your task.

The CSN® tubular heating elements are of versatile application and have a long life span, if appropriately used. The tubular heating elements serve for the calefaction of gases, liquids and solid matters. The configuration of the elements is jointly decisive for the effectiveness. CSN ® tubular heating elements are available as round heating elements in diameters of 6.5 / 8.5 / 11.5 and 16 mm. These elements provide different materials, countless shapes and lengths up to 7 m, the optimal solution for your application. Our team also looks forward to standing by your side if you need heating solutions which cannot be covered with socalled standard solutions. We are happy to develop processcustomised solutions in close consultation with you. Nowadays, amongst others, our high quality standards are documented via the „GisoVerschlusstechnik“ (Giso locking technology), with which we specify the isulation resistance values

IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used. The IBC/Bpro-Container heating jacket as well as the HILC unheated insulated lid are perfect means to support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

CPAK provides cover tapes that are produced by different manufacturers and guarantees compatibility with their own materials. Before its release, the cover tape goes through several tests. There are two kinds of sealing cover tape heat sealable tape & pressuresensitive adhesive tape (PSA). The difference is that there is no heat treatment required for PSA cover tape. The basic material in our cover tape is polyester. A full range of cover tape widths is available for carrier tape; the width is ranging from 8 mm to 200 mm.

The used head protection textile resists liquide metal, sparks and slag. With these characteristics, it is the perfect addtion to our security cutting. in order to keep visual, thermal and dynamic effects of an arc when cutting under voltage cables to a minimum as possible . The heat protective cover protects flammable and temperature sensitive materials for welding- and shringking work. - Asbestos-free, free from hazardous substances - tissue from sicilia fiber, about 96% share of silica (amorphus Si02) - Suitable for temperatures up to 1300&°;C short term, continuous exposure to bis 1100&°;C - The product is not toxic. There is no ecologcially harmful effects known.

Profile gaskets and Special solutions, Expansion joints Characteristics Perfect axial and radial flexibility, good stress relaxation and protection against wear Very low leakage values through outstanding cross section and surface density. Without organic carrier fibers, no shrinkage under temperature Resistant against gases, vapours, oils, caustics and most of acids, also suitable for NH3 - gases, hydrogen, nitrogen and methanol Non hazardous to health (no Al2O3 content !) A specific vulcanisation technique for temperingsystem applications simplifies the installation and improves adaption to uneveness Main application Developed for highest thermal and mechanical strains, particularly proven in heat treatment systems, door and cover washers in foundries, power plants. Construction Wrapped gaskets from texturised glass cloth with high temperature resistant, gas proof elastomeric binders. Standard: Graphitised nonstick Coating Special: Raw, elastomercoated or PTFE impregnated...

Brushless screwdriver with wide torque range corresponds various fastening work Brushless Motor Equipped with a torque adjustment ring cover. Reduced heat generation (startup current of the motor is constrolled to reduce unnecessary heat.) Ecofriendly Adoption of green procurement parts, carbon dust free by use of brushless motor. Ecofriendly design by pursued cleanliness. Robust and high durability realized by new body design using high strength plastic. Pistol Grip DLW2300ESD is standard accessory of this model. ESD (electrostatic discharge) protection compliant with IEC6134051.

Trench heating unit with EC tangential fan convection. All-purpose, individual, made-to-measure. The Katherm QK is whisper-quiet. It is also available in 120 versions. It comes in non-standard lengths, with curved trench, mitres, cut-outs for columns or angles. Its ultra-long EC fan covers the entire heating range, from full space heating to cold air screening. Benefits - made-to-measure trench lengths - high outputs at small trench depths, even when used with low temperatures - whisper-quiet EC technology Applications All areas of buildings in which effective heating and cold air screening is required. Effective, energy-saving heating can be provided by Katherm QK in conjunction with modern heating systems

This cleaning machine "Rhönrad" is the ideal choice for the cleaning of parts with cropped areas, which needs to be moved during the cleaning process (rotate or swivel around the horizontal axis). Through the use of a special height adjustable lock-system also smaller baskets can be used without problems. Multi tank systems for special subsequent processes can complemented as well as drying and bath treatment systems. The PERKUTE-System: economically - environmental - effektive Basic unit § Stainless steel version § Compact and sturdy construction § Modern design § Powerful washing pump § High permissible basket load § Low water pressure switch as dry-run protection for pump and heating elements § Tank cover in the return flow, filter baskets incl. § Programmable Siemens S7-1200 touch panel control § Complete machine casing in modern design § Loading ramp incl. collection tray and grating for manual loading § Service hatch for cleaning activities § Mountings for fork-lift §...

TPE styrene based material in 0 Shore A to 65 Shore D. We have developed a family of materials - the Dryflex S range, which can be used advantageously in most applications. The material is easy to process and is ideal for injection moulding but can also be extruded. We have engineered endless formulations to fulfil different properties and application requirements. Grades with improved compression set properties, high temperature or abrasion resistance. Here we give you an introduction to some of our typical grades, contact us to discuss your specific requirements. Applications include: Soft-touch grips & handles Packaging caps & closures Sports equipment Toys & infant care Packaging Tools & hardware Automotive components Download the Dryflex S Product Guide Dryflex S 400 Series SBS Based Materials A good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The 400S series covers grades from

The dip tank TB400 is the smallest model in our line of paint stripping systems. It is ideally suited for wheels / light-alloy rims, bicycle and motorcycle frames, painting aids or hooks. Insulated, double-walled dip tank ("vat-in-vat" system) with insulated top cover, indirect electrical heating, circulating system, and high-quality safety and monitoring technology.