Results for
GRONEMEYER MASCHINENFABRIK GMBH & CO.
Germany
The Gronemeyer switch divides the stream of products into two or more lanes during continuous operation or in cycle operation. You can select either a pneumatic or an electrical drive. The pneumatic drive is characterized by a good price-performance ratio. The electrical drive allows you to divide the stream of products into more than two lanes. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 250 mm —Pneumatic drive Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts —Infinitely variable width adjustment —Combination with gripper technology for distribution during continuous operation —Electrical drive for distribution to multiple lanes —Complete machine cover made of Makrolon with maintenance doors
Request for a quoteGRONEMEYER MASCHINENFABRIK GMBH & CO.
Germany
The Gronemeyer synchronized switch divides the stream of products batch-by-batch and gently into several lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. Because the number and width of the lanes to be approached can be freely selected, the machine is suitable as product feed for palletizing machines or similar devices. Technical data: —Distribution: Number of lanes depends on the recipe —Distribution process during continuous flow of materials —Product gap: from 15 mm —Conveyor speed: more than 60 m/min. —Lane distance: depends on recipe —Complete machine cover made of Makrolon with maintenance doors —Independent electrical control system with congestion monitoring Optional equipment: —Loading and unloading belts —Infinitely variable width adjustment
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
This bourdon tube pressure gauge with switch function (electrical contact device) has been especially constructed for the operation with diaphragm seals. A custom bourdon tube that is reduced in volume produces a very slight temperature error. Diaphragm seals with reduced diaphragm surface areas may also be used. A large selection of LABOM diaphragm seals is available for a variety of applications. Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1…3 bar to -1…15 bar, 0…4 bar to 0…400 bar High quality case with bajonet ring NS 100 Case, measuring element and pressure connection of stainless steel Instrumention connection welded with diaphragm seal Small temperature error by means of reduced-volume measuring element Process connection via diaphragm seal product group D5 Electrical contact device per DIN 16085 EAC declaration
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Modulare differential pressure transmitter with metallic diaphragm; with function modules replacement on site without recalibration, „plug and measure“. Features: Nominal ranges 0.4 up to 40 bar Turndown 5:1 Accuracy ≤ 0,15 % Output signal: – 4…20 mA – alternative with PROFIBUS PA Output functions: linear, invers, table function with up to 31 support points Stainless steel case in sturdy design, degree of protec-tion IP 69K Media temperature -40…100 °C Wetted parts stainless steel EAC declaration (upon request) Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 - Calibration certificate as per EN 10204-3.1 - Classification per SIL2
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Features ■ Differential pressure transmitter with metallic diaphragm ■ Function modules: Multifunctional display; Switching module with 2 floating channels; HART® module ■ Function module replacement on site without recalibration, „plug and measure“ ■ Nominal ranges 0.4 up to 40 bar ■ Turndown 5:1 ■ Accuracy ≤ 0,15 % ■ Output signal: 4…20 mA; alternative with PROFIBUS PA ■ Output functions: linear, invers, table function ■ Stainless steel case in sturdy design, degree of protection IP 69K ■ Media temperature -40...100 °C ■ Wetted parts stainless steel ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate and calibration certificate as per EN 10204-3.1 - Classification per SIL2
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LABOM MESS- UND REGELTECHNIK GMBH
Germany
The temperature switch GP2610 in clamp-on technology is intended for measuring the surface temperature of pipes especially in food/pharmaceutical/biotechnology applications. The output signal is connected to a digital PLC I/O port. ■ Various clamping elements for process connection ■ Hygienic temperature measurement for pipe diameters of 4…300 mm ■ Measuring system patented ■ High accuracy, fast response ■ Easy installation ■ No welding, no process interruption ■ No additional isolation required ■ Measuring insert can be recalibrated ■ Temperature switch with output signal 4 or 33 mA, 2-wire technology ■ Switch point setting by using a magnet; range from -40 to +150 °C ■ Switching point accuracy ± 0,5 K ■ Switching delay: 0 sec ■ Hysteresis 0.1 K ■ Switch state indicator with 2 LEDs (green light) ■ Electrical connection M12
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
These thermometers are suitable for use outdoors and in aggressive environments. The devices can also be supplied with additional liquid damping for use in extreme conditions. Further information on mounting see operating instructions. ■ Case, measuring system and wetted parts of stainless steel ■ Case NS 100/160, degree of protection IP 66 ■ Stem diameter 6, 8 and ≥ 10 mm ■ Short immersion lengths of the stem may be used ■ Accuracy class 1 or 2 per DIN 16196, depending on range ■ Micro adjustment pointer for indication correction ■ Switch functions (electrical contact device) per DIN 16196:
Request for a quoteGURTEC GMBH
Germany
Belt width 500-1400 mm (20” to 55”)
Request for a quoteGURTEC GMBH
Germany
Belt width 500-1400 mm (20” to 55”)
Request for a quoteGURTEC GMBH
Germany
Belt width 500-1400 mm (20” to 55”)
Request for a quoteGURTEC GMBH
Germany
Belt width 400-1400 mm (16” to 55”)
Request for a quoteResults for
Switch - Import exportNumber of results
12 ProductsCountries
Company type