Results for
Germany
Highly effective spray for hand sanitisation without water. Provides thorough hand hygiene on the go. With certified organic alcohol and plant-based ingredients for a fresh and clean skin feel. Dosage Thoroughly rub 2 x 3 ml into your hands and allow it to take effect for 60 seconds. Please use biozides with care. Always read the label and product information before using. alkohol denat. aqua glycerine lactic acid citric Acid Made with certified organic ingredients.
Request for a quoteGermany
SCHÜTZE spray valve MMFS pneumatically controlled roundspray valve. Designed for spraying signature- and marking colours. Very fine and small sprayjet. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 2,0 mm ø roundspray aircap
Request for a quoteGermany
SCHÜTZE WS 5/1 fluid sprayer spraying liquids under pressure in a hollow cone jet without atomizing air. drill-hole in nozzle plate: 1,5 mm ø (other drill-holes depends on liquid) Simple design. Also to be connected to any water supply line. weight: 300g
Request for a quoteGermany
SCHÜTZE W 5 / P blowgun with 50 mm pipe (standard lenght), other lenght available special acessories: rebound guard, flat nozzle, silencer nozzle, venturi nozzle SCHÜTZE W 5 / G blowgun, with spraight handle with 50 mm pipe SCHÜTZE W 5 / PB blowgun with silencer and increased blow power
Request for a quoteGermany
SCHÜTZE S 720 Universal AIRLESS spraygun S 720/250 up to 250 bar S 720/500 up to 500 bar S 720/LV to be equipped with standard airless nozzles or in LV version for extrusion nozzles standard supply: - filter - 1/4” swivel safety devices: trigger lock trigger guard
Request for a quoteGermany
SCHÜTZE 2-K-spraygun two-component-spraygun Supply of both components directly into each sprayhead. Supply of atomizing air and control air via gun body. Only one trigger. Mixing within spray jets. Mixing ratio can be regulated individually. available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø flatspray or roundspray pattern depending on aircap, all material leading parts made from stainless steel. For glues special nozzle sets (KLS-version) available. weight: only 490g
Request for a quoteGermany
SCHÜTZE W 3 / FZ-Duo FINE-SPRAY gun, a special design for spraying fluids of low viscosity, f.i. release agents available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel flatspray or roundspray pattern depending on aircap - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 245g Also available in HVLP-technique.
Request for a quoteGermany
SCHÜTZE W 3 / FZ-Duo FINE-SPRAY gun, a special design for spraying fluids of low viscosity, f.i. release agents available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel flatspray or roundspray pattern depending on aircap - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 245g Also available in HVLP-technique.
Request for a quoteGermany
SCHÜTZE W 3 / FZ-Duo with round/flat spray regulation FINE-SPRAY gun available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue Also available in HVLP-technique.
Request for a quoteGermany
SCHÜTZE W 3 / W 3 F decor and “small job” spraygun 50 ccm flow cup, aluminium available nozzle dimensions: 0,3; 0,5; 0,8; 1,0 mm ø type W 3 = Roundspray type W 3 F = Flatspray available flow cups: 50 ccm, aluminium 0,3 ltr., aluminium nozzle and needle: stainless steel gun body: aluminium, anodized blue weight: 310g
Request for a quoteGermany
SCHÜTZE S 947 heavy duty convertible spraygun incl. precision air micrometer, with feed pipe, flowcup or syphoncup available nozzle dimensions: 0,8; 1,0; 1,2; 1,3; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue Also available in HVLP-technique
Request for a quoteGermany
SCHÜTZE W 7 convertible spraygun with feed pipe, flowcup or syphoncup available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0 mm ø nozzle and needle: german silver, stainless steel on request - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue
Request for a quoteGermany
SCHÜTZE S 941 Heavy duty spraygun incl. precision air micrometer, 0,6 ltr. flow cup, plastic with drop stop available nozzle dimensions: 0,8; 1,0; 1,2; 1,3; 1,4; 1,5; 1,7; 2,0 2,5; 3,0; 3,5 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue weight: 720g Also available in HVLP-technique
Request for a quoteGermany
SCHÜTZE W 4 pressure feed cup gun 0,7 ltr. pressure feed cup, aluminium max. material pressure = 1 bar available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0; 3,5 mm ø nozzle and needle: german silver, stainless steel on request gun body: aluminium, anodized blue weight: 950g
Request for a quoteGermany
SCHÜTZE W 2 roundspray spraygun 0,3 ltr. flow cup, aluminium available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0 mm ø nozzle and needle: german silver gun body: aluminium, anodized blue weight: 530g
Request for a quoteGermany
SCHÜTZE W 1 standard spraygun 0,6 ltr. flow cup, aluminium available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0; 3,5 mm ø nozzle and needle: german silver, stainless steel on request - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 635g
Request for a quoteGermany
SCHÜTZE spray valve KA 2 - NA Details as for KA 2 Additional equipped with a proximity switch for control of needle (open/close). nozzle and needle : stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5mm Ø
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
SCHÜTZE AIRLESS-spray valve S 830 Spray valve without atomizing air. Connections of valve on under-side. Control of S 830 via external pneumatic valves. Max. material pressure: 250 bar All standard airless nozzles can be fitted to the S 830. needle seat and needle : tungsten carbide
Request for a quoteGermany
SCHÜTZE extrusion valve MVV The mini extrusion valves of series MVV are designed for the application of oils, release agents and other thin liquids. The application can be done punctiform or linear. nozzle + needle: stainless steel available nozzle dimensions: 0,2/0,3/0,4/0,5/0,6/0,8 mm Ø
Request for a quoteGermany
SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteGermany
SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteGermany
SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteGermany
SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteGermany
SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteGermany
SCHÜTZE spray valve GF / 5 with quick release adapter Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique
Request for a quoteGermany
SCHÜTZE spray valve GF / 4 Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nnozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm Ø Also available in HVLP-technique
Request for a quoteGermany
SCHÜTZE spray valve GF / 3 Designed for spraying colours, paints etc. With integrated atomizing air valve for regulation of purging air. Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique
Request for a quoteGermany
SCHÜTZE spray valve GF / 1 + GF / 2 These spray valves are robust apparatuses for application of colours, paints. Also suitable for spraying release agents and glues. nozzle and needle: stainless steel available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5; 3,0; 3,5 mm ø. flatspray or roundspray pattern
Request for a quoteGermany
SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø
Request for a quoteResults for
Sprays - Import exportNumber of results
39 ProductsCountries
Company type