Laser - Import export

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size materials. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The laser cutter system 2XL-3200 is one of the biggest in the cutter series. The processing area is 2,740 x 3,200 mm (107.8" x 126"), allowing to precisely cut and engrave large materials, for example textiles. The contactless laser cutting does not cause any bulges in the material and guarantees filigree cuts right from the beginning.

The laser cutting and engraving system L-1200 for acrylic processing offers unique precision and cut quality at highest cutting speeds, applicable to any material to be processed by individually choosing the right laser power. All eurolaser cutting systems are available with a laser power from 60 to 650 watt. Your benefit: application-related efficiency. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

With the laser cutting and engraving machine XL-1200 for acrylics eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

Acrylics can be cut and engraved on a processing area of 1,800 mm x 3,200 mm (70.8" x 126.0"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

CO2 lasers offer impressive results in the marking of organic and inorganic materials. A very high degree of detailed accuracy and long-lasting markings are the outstanding features of this marker. The compact marking lasers from eurolaser require very little space, operate reliably and accurately and are designed for use in made-to-order items through to small series. It goes without saying that they can also be integrated into production lines.

The laser cutting machine 3XL-3200 is the “Colossus” in the eurolaser cutting series. Textile processing off the role up to 3,210 mm width and of very large materials with seamless cuts is possible. Flexible software packages enable unlimited processing and forwarding of data from other machine producers.

The laser system size XL-1600 is the professional solution for the laser processing of textiles. Besides, the automatic conveyor system enables the possibility to process textiles directly from the roll. By doing previous cutting tests with your individual materials, we test which laser system configuration would be the most suitable for you in order to achieve optimum results.

With the laser cutting and engraving machine XL-1200 eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with

Various materials can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.8" x 126"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Das Laser Cutter- und Gravur-System L-1200 bietet einzigartige Präzision und Schnittqualität bei höchsten Schnittgeschwindigkeiten, die sich je nach zu bearbeitenden Material durch individuelle Laserleistungen anpassen lassen. Alle eurolaser Cutter-Systeme sind mit Laserleistungen von 60-650 Watt erhältlich. Für Sie bedeutet das anwendungsbezogene Effizienz. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

An increase in productivity thanks to loading and unloading during the cutting process Workpiece removal during the cutting process at the collecting table possible The material feed is stretching-free Accurate placement of the workpiece through automatic edge control with the Feeding Unit Optional camera recognition system for automated processing Optional marking systems (e. g. Ink Marker) Processing of very large formats by edgeless continuation of cuts possible.

Loading and unloading during the cutting process Increasing efficiency by minimising downtime Safety concept for a riskless material change eurolaser customers could compete themselfes on the market because of the availability, functionality, flexibility of the systems. Since several years eurolaser has provided the possibility of splitting the processing table into two areas: The "Remote Operation" option. The advantage is to cut or engrave the placed material in the front area, while you unload the finished pieces and reload directly on the rear table surface. The laser changes automatically between the two processing areas, thus having the system in operation almost 100 per cent.

Real time laser monitoring Belt width 1400-2200 mm (55” to 87”) See more >

WiTEC Performance is the perfect solution for the most precise and fastest machining of your sheet material! The Performance is the flagship solution of the WiTEC machine family. A machine concept based on a FEM optimized design, built using premier precision components, and equipped with linear magnet motor technology, the Performance is able to achieve the highest levels of precision and speed, up to 80m/min! Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

Loading and unloading during cutting process - increased system duty Easier accessibility of the pieces produced by moving the material support Increasing efficiency by minimising downtime Easy handling Automatic table shift after cutting process possible System is not encapsulated - Robot assembly possible (24/7 - operation) New material is located on the top shuttle table - thereby no material remaining is falling on the new material. Shuttle Table System automatic (STA) Table shift at the touch of a button Process starts automatically after cutting is finished Time saving by optimised processes Minimising supervision of the laser system Additional manual handling possible Snapping table module in after the shuttle process prevents incorrect handlings Of course, the Shuttle Table System is still available as a mere manual version.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting of foils and membrane switches. A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter.

The laser cutter system 2XL-3200 is one of the biggest in the cutter series. The processing area is 2,740 x 3,200 mm (107.8" x 126"), allowing to precisely cut and engrave large materials, for example textiles. The contactless laser cutting does not cause any bulges in the material and guarantees filigree cuts right from the beginning.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting and engraving of acrylic glass (Plexiglas ®, Perspex ®). A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting, engraving and marking. A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Use the best range of tools in parallel to the laser! Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Extend your machining and material options without expensive additional investments. This gives you up to three tools in parallel on one machine a range of tools with uncountable possible combinations high-quality, market-tested tools from Zünd Systemtechnik AG maximum versatility additional options for combining the high-quality camera for printed materials with all tools high speed and stability in the machining process bayonet lock for fast tool changes Maximum versatility and the right tool for every application! The modularity of the eurolaser systems means you can fulfil every customer wish and are at home in every market.

The CO2 laser machine XL-1600 with a processing area of 2,270 x 1,600 mm (89.3" x 62.9") is a model of the XL series. The dimensions allow the processing of medium-size textiles. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

The laser cutter size XL-1600 is the professional solution for the laser processing of wood. With its modular concept and the easy handling it offers a future-oriented and efficient investment – just like all other laser cutting systems. With cutting and engraving tests performed on your individual materials we determine in advance the optimal configuration of your laser cutter.

The cutting machine M-1600 for foils and membrane switches offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for cutting of plastic foils.

The eurolaser laser cutting machine M-1200 for textiles is a compact model with a processing area of 1,230 x 1,330 mm (48.4" x 52.3"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off!

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size textiles. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.