Iron metals - Import export

We use state-of-the-art machines to produce high-quality molded parts in the area of PU casting technology. By varying the raw materials, formulations and manufacturing processes, the properties can be specifically influenced. Therefore, we can produce difficult geometries and also larger components with the excellent properties of a polyurethane. In casting technology, small and large quantities can be produced cost-effectively using simple molds. Firm bonding with other materials (steel, aluminum, cast iron metals, etc.) is also possible.

profiPANEL enables a total of eight mounting depths to be provided for. Thanks to this wide range of depths, profiPANEL therefore enables almost every conceivable configuration for the internal mounting of components to be realised. The enclosure front of the profiPANEL system is manufactured made-to-measure and provides for the almost edgeless and flush mounting of a front plate. Appropriate cut-outs for a display, switches and more are included in the service provided by ROLEC and are produced ex-works to meet customer specifications. The profiPANEL series includes two desk models for internal mounting. An ergonomically designed profile handle system is available for even more convenient handling, particularly with the deeper profile versions. There is also a 450-mm wide latching keyboard holder as an alternative to the desk, which can be enhanced and/or extended by an additional mouse holder.

aluNORM was developed to protect electrical or electronic components. Due to the large number of standard sizes in four variants, the maximum level of product variety is guaranteed. Typical ROLEC single-channel mounting combines the screw channel for attachment to the wall with the one for closing the enclosure. This provides more space in the interior for your internal mounting. An EMC version is available for the AS and AD variants. This is also available for the AF and AH variants in the dimensions marked. Fastening domes in the lid and bottom enable simple installation of supporting rails, mounting plates, circuit boards and more. Matching cable glands are also available.

technoPLUS is an advanced designer enclosure made from high-quality, UV-resistant Luran for electronic applications outdoors. The lid already has a recess to accommodate membrane keypads, films or touchpads. The screw channels are outside of the enclosure interior, thus allowing the enclosure to be attached while the lid is closed. The screw channels are simply covered with captive designer clips following assembly. Practical lid supports are available to provide strain relief on internal mountings in the lid. To enable use almost anywhere outdoors, technoPLUS comes with a practical mast support, which clings to virtually any curve. In the interior, there are fastening domes for the easy attachment of internal mountings. Compatible cable glands and other accessories are of course also available.

aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a recess to accommodate membrane keypads or front plates. The design covers cover the screws of the wall and lid attachment and give the enclosure an attractive appearance. The enclosure should be mounted while closed. Integrated M5 fastening threads in the bottom and lid offer optimum fastening options for a wide range of internal mountings. Extensive range of accessories and matching cable glands are also available.

tehcnoCASE is a modern plastic enclosure with design stripes in grey, red, green, blue or yellow, which can be easily snapped on to cover the screw channels and give the enclosure its own individual visual appearance. A standard recess in the lid enables front plates, films or membrane keypads to be accommodated. The large number of standard sizes offers a wide range of options for mounting numerous electronic or electrical attachments. There is also an option to combine various lids and bottoms with each other, increasing the variety. Fastening domes for the attachment of internal mounting are already integrated into all parts. Compatible cable glands, supporting rails and other accessories are of course also available.

starCASE is a true multipurpose enclosure made from flame-retardant Luran. starCASE is ideally suited for almost every kind of application and also a perfect enclosure for the visual range thanks to its ergonomic and modern design. There are numerous fastening options: be it wall, ceiling, sheet piling or machine fastening – everything is possible. The integrated recess in the lid enables films, membrane keypads or front plates to be attached easily – depending on individual requirements Beneath the design covers on the curves of the enclosure are lid screws and separate screw channels for fastening the enclosure. These enable the housing to be attached with the lid closed. Practical lid supports provide simultaneous strain relief for the internal lid mounting. An optional lid lock prevents unauthorised access to the internal mountings. Matching accessories and cable glands are also available.

The principle of profilPLUS allows for time-saving assembly. For this, ROLEC designers have come up with "one-screw adjustment". Suitable adapters for existing connections to panels from leading manufacturers such as Siemens, B&R, CRE Rösler and Beckhoff have also been designed. All system couplings have also been pre-fitted with a support profile as standard, saving time. The ducts in the interior of the system provide space for multiple cables such as e.g. HDMI, DVI or a network adapter. Cable protectors are integrated into all rotating system elements as standard. The integrated equipotential bonding protects humans and machinery. A set screw system in the joints serves to adjust to any pivoting range in 30° steps. For larger loads, a reducer adapter also enables connection of profiPLUS 50 to the larger profiPLUS 70 system.

commandCASE is a functional economical and elegant control enclosure for electrical or electronic applications. Due to its construction depth, it is ideally suited to connection to a suspension arm system. commandCASE is available in three versions: with hinges and quick-acting closure (also lockable), with hinges and screw or as a fully-screwed version with lid supports to provide strain-relief on the internal mounting in the lid. A recess to accommodate membrane keypads, front plates or to fit an operating panel has already been integrated. On the reverse, the screw channels are covered with cover caps, which also serve as edge protection. On the bottom and top are numerous fastening domes for attaching internal mounting. Mounting plates, matching cable glands and other accessories are also available.

EXCOR PERIGOL DW is an anti-corrosion oil containing solvent which is chiefly used for the corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. It offers excellent water-repellent properties. In metal parts produced by processes involving water EXCOR PERIGOL DW removes the water, which dissolved corrosion-inducing salts may also contain, from the surface, creating a wipeproof film which protects against corrosion. This property can also be useful for dry parts, for instance during spraying. A wipeproof film provides more robust protection against mechanical and thermal stresses and also enhances the corrosion protection it provides.

EXCOR PERIGOL 100 is suitable for corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. PERIGOL 100 may be applied using immersion or spraying techniques. EXCOR PERIGOL 100 corrosion protective oil only requires a brief drip-off time and when applied can resist temperatures of up to approximately 50º Celsius. Solvent-free PERIGOL 100 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.

EXCOR PERIGOL VCI 230 is used to provide corrosion protection for ferrous metals, steel, cast iron, copper and aluminium alloys as well as fully or partially galvanised steel. Solvent-free PERIGOL VCI 230 contains vaporising corrosion inhibitors and may be applied via immersion, spraying or brushing. This product has been specially developed for the protection of metallic cavities. Thanks to the VCI it contains, coating the floor of a case suffices to protect the inner walls from corrosion. PERIGOL VCI 230 is compatible with a wide variety of engine and gear oils, meaning as a rule it does not have to be removed after shipment. In direct contact with metal surfaces PERIGOL VCI 230 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.