Diaphragm seals - Import export

Flange-type per EN and ASME, flush-mounted separating diaphragm Type series DA1120 Features Flush-mounted separating diaphragm of stainless steel or special material Volume optimised diaphragm base Alternative with reinforced diaphragm in LTC technology (reduced temperature influence) Connection to Zone 0 System fillings for different applications Measuring device connection: directly welded, directly screwed, with temperature decoupler, with capillary Less features Options Material certificate acc. to EN 10204-3.1

"Kombibar" Combined pressure measurement device Features: Combination of diaphragm seal technology with pressure transmitter and mechanical gauge A wide range of variations can be realized All process connections of LABOM´s diaphragm seal portfolio available Redundant measurement of 2 devices in one process connection Options: Explosion protection for gases Optional with switch function

Pressure transmitter with diaphragm seal technology for the measuring of relative and absolute pressures of gases, vapors and liquids Stainless steel case in sturdy design, degree of protection IP 65/67 Accuracy 0.1 % High-resolution graphic display with Intuitive 4-button operation and backlight Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0,25 bar to 400 bar Turndown up to 100:1 Measuring rate up to 100 Hz Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function with up to 64 support points Media temperature -40…400 °C Case design process connection bottom Case design process connection back Various process connections Approved according to NAMUR 95 EAC declaration (upon request)

Pressure transmitter COMPACT Features: Measuring ranges 0…250 mbar up to 0…100 bar Linearity error including hysteresis <+ 0.2 % f.s. Piezoresistive measuring system Hygienic design according to EHEDG, FDA and GMP recommendations Material and surface quality according to the hygienic requirements Wetted parts of stainless steel; completely welded Stainless steel housing as standard or field housing Degree of protection IP 65, IP 67 option Output signal: 4…20 mA Process temperature up to 200 °C Options: Explosion protection for gases Classification per SIL 2 Inspection certificate: material certificate as per DIN EN 10204-3.1

Pressure gauge NG 63/100 in hygienic design for diaphragm seal operation, types series BH8: Features: High quality case NS 63/100 in hygienic design as per EHEDG recommendation Degree of protection IP 65 Accuracy class 1.6/1.0 per EN 837-1 Flush mounted diaphragm Small temperature error by means of reduced-volume measuring element Options Neck tube and diaphragm seal in a one-piece design, optionally complete case including neck tube and diaphragm seal in an hygienic version available (Ra < 0.76 µm as per ASME BPE SF3 / EHEDG Doc. 8) Material certificate per EN 10204 Calibration certificate per EN 10204 Damping of movement Precision scale Autoclavable EAC declaration (upon request)

Features ■ Digital pressure transmitter with IO-Link V1.1 output signal ■ Data transmission rate COM 3 (230.4 kBaud) ■ Hygienic design as per EHEDG recommendation ■ Accuracy ≤ 0.3 % ■ Case and wetted parts of stainless steel, degree of protection IP 65 ■ Nominal range -400…400 mbar up to -1…100 bar ■ 2 switching outputs maximum Additional features ■ Approvals/Certificates - Material certificate per EN 10204 - Calibration certificate per EN 10204 - Roughness height rating with inspection certificate acc. to EN 10204-3.1 ■ Hygienic design ■ Wetted parts electropolished Application The pressure transmitter COMPACT with IO-Link is suited for measuring the relative pressure of gases, vapors and liquids. Due to the case design as per EHEDG recommendation and various process connections, the transmitter is suitable for the hygienic requirements of plant and machinery engineering.

Diaphragm seal for food/pharmaceutical/biotechnology clamp connection per ISO 2852, DIN 32676 Features ■ Flush-mounted separating diaphragm of stainless steel, laser welded ■ Volume optimised diaphragm base ■ System fillings for different applications ■ Measuring device connection: - directly welded - directly screwed - with temperature decoupler - with capillary Options ■ Certificates - Material certificate acc. to EN 10204-3.1 ■ Electropolishing (wetted parts) ■ Hygienic design with advanced surface quality ■ Special materials upon request Application Suitable for mounting to bourdon tube pressure gauges and pressure transmitters. The diaphragm seal with clamp connection is used mainly for dead-zone free pressure measurement.

The digital differential pressure transmitter PASCAL Ci4 Delta P has been specially designed for the mounting of diaphragm seals with a volume reduced differential pressure chamber. Due to this design the transmitter is suitable for various applications, e.g. for the level measurement of pressure vessels.

Features ■ Pressure transmitter with on-site indication for relative pressure measurements ■ Safety pattern gauge S3 per EN 837-1, NS 100 and 160 alternative high quality case with bajonet ring per EN 837-1 S1 ■ Nominal range 0…0.6 bar up to 1000 bar ■ Output signal: 4…20 mA (20…4 mA) 2-wire technology ■ Integrated angle-of-rotation sensor, not subject to wear ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Calibration certificate - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 ■ The electrical zero can be corrected by holding a ferromagnetic object to a marked location on the case ■ Additional switch function ■ Diaphragm seals see product group D5 ■ Output signal 0...20 mA and 0...10 V in 3-wire technology (for devices without Ex-protection and without zero point setting)

Pressure transmitter PASCAL CV4 with threaded connection or for diaphragm seal operation Features: Compact case of stainless steel în hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0,25 bar to 40 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Wetted parts stainless steel Options: Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate and calibration certificate per EN 10204 Degree of protection IP 69K Case and front cover of stainless steel 316L Type plate laser marked EAC declaration

Differential pressure and level transmitter PASCAL Ci4 Delta P, highly overload protected Features - Differential pressure transmitter with diaphragm seal - Simultaneous display of differential pressure and static pressure - Reference accuracy 0.07 % - Long-term stability 0,1 % within 5 years - Nominal ranges 100 mbar to 16 bar - Turndown up to 100:1 - Stainless steel case in sturdy design, degree of protection IP 65/67 - High-resolution display with intuitive 4-button operation and backlight - Comprehensive parameterising functions - Comprehensive simulation and diagnostic functions - Quick access to device data - Development according to SIL2 - Maximum working pressure 160 bar - Measuring rate up to 50 Hz - Output signal 4…20 mA with HART® protocol - Media temperature -90…400 °C - Configuration memory - Digital communication via PDM, FDT/DTM, 375/475 Field Communicator - Output functions: linear, invers, square root, table function - Wetted parts stainless steel