Electronics - Import export

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

Welcome to EWOQE, your expert in 3D construction, design, and modeling! Our passion lies in creating high-precision and innovative 3D solutions that propel your projects forward. Our experienced team of engineers and designers collaborates closely with you to bring your visions to life. From concept to final modeling, we offer expertise and creativity every step of the way. Thanks to cutting-edge technologies and a deep understanding of additive manufacturing techniques, we can realize even the most complex geometries and unique designs. Whether you need prototypes for new products, want to optimize existing models, or design complex components, we are your reliable partner for all your 3D challenges. Trust our expertise and let us transform your ideas into reality together. Contact us today to learn more about our services in 3D construction, design, and modeling.

Electrically “versatile” adjustable head, back and foot regions. Flat motor. Film coated slatted frame in multi-layer birch, with 45 slats. Mounted in flexible TRIO caps covering the side rails. Individually adjustable level of firmness in the centre zone. Shoulder comfort zone. Load distributing centre belt.

Electrically adjustable head and foot regions. Slatted frame in multi-layer natural birch, with 28 flexible slats. Mounted in flexible internal DUO caps. Individually adjustable level of firmness in the centre zone. Load distributing centre belt.

The ECS-PCIe/FPGA is an EtherCAT Slave Controller board designed for the PCI Express bus. It utilizes a Beckhoff IP-Core which is implemented in an Altera® FPGA and configured for 8 FMMUs, 8 Sync Managers, 60 kB DPRAM and 64 bit Distributed Clocks. The FPGA connects between the PCI Express bus and the two Ethernet interfaces on the front panel. Because of this simple hardware topology and the use of a “soft” controller the design offers a maximum of flexibility. The PCI Express system can act as an I/O node. An EtherCAT master can use several EtherCAT protocols like CoE, FoE and EoE to communicate with this EtherCAT slave device. Via pin header connectors equipped on the ECS-PCIe/FPGA 36 3.3 V LVTTL I/Os are available, including the signals from the EtherCAT Slave Controller: 2x Sync and 2x Latch for system synchronization. Device drivers for Windows® and Linux® with documentation and EtherCAT slave examples are included in the scope of delivery. Other (real time) OS on request.

The CPCIserial-CAN/402-4-FD comes with two or four independent CAN FD interfaces via DSUB25 according to ISO 11898-1:2015. The CAN FD interfaces are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented in the Altera FPGA. With a higher bit rate in the data phase in combination with the increase of efficiency by a higher number of user-data bytes, CAN FD offers a higher data throughput while maintaining the benefits of Classical CAN. The board is fully backwards compatible with CAN and can also be used in Classical CAN applications. The FPGA supports bus mastering (firstparty DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the CPCIserial-CAN/402-4-FD can be operated for example in Hypervisor environments.

The CAN-EtherCAT gateway can link CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) implementation to a realtime EtherCAT network. The EtherCAT slave functionality is in accordance with ETG Modular Device Profile No. 5000. The module can also be configured as Ethernet switch port using the EoE protocol. Firmware updates are possible via web interface (EoE) or FoE (File access-over-EtherCAT). The CAN high speed (ISO 11898-2) compatible interface allows a maximum data-transfer rate of 1 Mbit/s. The 100BASE-TX EtherCAT interface is compatible to IEEE 802.3 and runs with 100 Mbit/s. The EtherCAT as well as the CAN interface are electrically isolated. Customization on Request.

The CANopen-PN can link any PROFINET IO controller to a CANopen network. The gateway operates as a PROFINET IO device with a maximum of 1440 bytes input data and 1440 bytes output data on the PROFINET IO bus. The CANopen-PN connects CANopen modules with CANopen (CiA 301) applications to e.g. a SIMATIC-S7. A maximum number of 127 CANopen nodes can be connected to the gateway. The CAN high speed (ISO 11898-2) compatible interface allows a maximum data-transfer rate of 1 Mbit/s. The 100 BASE-TX PROFINET IO interface is compatible to IEEE802.3 and runs at 100 Mbit/s. The gateway is designed according to PROFIBUS International Document TC2-09-0002 (CANopen-Integration_7012 d07_Jul09). The PROFINET IO interface and the CAN interface are electrically isolated. The module can be configured via PROFINET IO configuration tool GSDML- Composer. The esd CAN tools (CANreal, CANplot, CANrepro, CANscript, COBview) can be used additionally for CAN diagnostics.

The CAN-USB/2 module is an intelligent CAN interface with an ARM 7 microcontroller for the local management of CAN data. The module supports the USB 2.0 High Speed interface with data rates of 480 Mbit/s. The ISO 11898-compliant CAN interface allows a data transfer rate of a maximum of 1 Mbit/s. The CAN interface is electrically isolated from other potentials by means of a digital isolator and a DC/DC converter. Software drivers for Windows® 2K/XP/Vista/7/8 (32/64 bit) are included in delivery. Linux® kernel ≥ 2.6 is supported via Linux CAN (SocketCAN) and NTCAN wrapper library. Drivers for other operating systems are available on request. The firmware can be updated from the PC. Updates are available on the esd website. Libraries for the higher layer protocols CANopen and J1939 are available. Additional free-of-charge esd CAN tools for Windows offer efficient setup and analysis of CAN applications and networks.

The CAN-M.2/402-2-FD is an M.2 Card, that features two electrically isolated CAN FD interfaces. The optional adapter CAN-PCIeMini/402-DSUB comes with a DSUB9 connector, selectable on-board CAN termination and an adapter cable. CAN-M.2/402-2-FD is fully backwards compatible with CAN and can also be used in Classical CAN applications. The independent CAN nets are driven by the ISO 16845:2004 certified esdACC (esd Advanced CAN Core) implemented in the Intel FPGA. The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions, in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the CAN-M.2/402-2-FD can be operated for example in Hypervisor environments. The CAN-M.2/402-2-FD provides high resolution 64-bit hardware timestamps for CAN messages. A wide range of software support and customization is available on request.

The CAN-PCIeMini/402-2 is an add-in PCI Express Full-Mini Card, that features two electrically isolated CAN High-Speed interfaces. The PCI Express® Mini Card comes with two CAN FD interfaces. There is also a version that can be used for extended temperature range. The optional adapter CAN-PCIeMini/402-DSUB9 comes with a DSUB9 connector, selectable on board CAN termination and an adapter cable. All CAN FD versions are fully backwards compatible with CAN and can also be used in Classical CAN applications. The independent CAN nets are driven by the ISO 16845:2004 certified esdACC (esd Advanced CAN Core) implemented in the Altera FPGA. The FPGA supports bus mastering (firstparty DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the board can be operated for for example in Hypervisor environments.

The CAN-PCIe/402-FD is a PC board designed for the PCIe bus that features one or two electrically isolated CAN FD interfaces according to ISO 11898-2 via DSUB9 connectors. Equipped with up to two CAN FD interfaces the board is available as low profile versions. In the CAN-PCIe/402-B4-FD version 4 CAN FD interfaces can be connected via one 37-pin DSUB connector. The CAN FD interfaces are designed according to ISO 11898-1:2015. They are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core), implemented in the Intel FPGA. All CAN FD versions are fully backwards compatible with CAN and can also be used in Classical CAN applications. The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load.

As a manufacturer of control cabinets, we are always at your side. We process standard cabinets as well as special designs for our customers. We take care of construction and wiring plans directly according to customer specifications, as well as the mechanical processing, the construction and the wiring of the control cabinets. After the actual construction, we also carry out an electrical test and insulation tests. Upon delivery, you will receive the customer-specific labels and accompanying documents. Your advantages with A + B Electronic -Switch cabinets directly according to your specifications -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully

If you want to have a device completely assembled, you've come to the right place. It does not matter whether you only need a small number of items or series production. We derive the processes and assembly instructions from a first joint workshop. In this way we can procure the important components, assemble the device and then test it. Your product will be assembled according to your requirements. On request, we can assemble under clean room conditions, assemble only individual components or prepare the device for final assembly on your premises. When assembling devices, we can work with methods such as press-fit technology or, for example, secure components by gluing. Your advantages with A + B Electronic -Device assembly according to your requirements -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully

Two modern AOI devices (automatic optical inspection) in 2D and 3D secure the manufacturing process during the SMT assembly. We use our X-ray inspection device to control the soldering process on components with connections under the housing. In addition to quality assurance, we also offer test and inspection procedures that are precisely tailored to your needs. In addition to circuit-specific in-circuit and burn-in tests, we can carry out application-related function tests in our test field. For specific tests, many customers send us the test procedures with the appropriate equipment directly. In this way we can check the functionality of your assembly without you having to tell us what exactly the tests are checking. Your advantages with A + B Electronic -Test procedures tailored to your needs -We are not just a service provider, we are a technology partner: A + B Electronic thinks your project with you and together we can successfully bring it into series production

At A+B Electronic you receive all services from a single source. In addition to the pure assembly, we are also happy to take care of the coating of your assemblies. The conformal coating serves to protect the surface of the assemblies, e.g. against condensation or contamination. In the process, the paint is applied using a curtain casting process under low pressure. The coating is only applied selectively where it is needed. Here we work with a programmed coordination system that is precisely tailored to your assembly. To dry, the elements are placed in our drying ovens and chambers so that the paint can cure in the atmosphere. What speaks for us: -Contact person for prototypes, large or small series -A high mix of components is not a problem -We are not just a service provider, we are a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production

From component preparation to precise soldering and checking: our THT assembly Our skilled employees take care of the manual component preparation on site so that the component later fits perfectly on the circuit board. We also have our own parts warehouse, with which we ensure reliable production of your THT orders. The THT assembly area at A + B Electronic includes three selective soldering systems and two wave soldering systems. Depending on the equipment, the right soldering process is selected. With the Ersa VERSAFLOW 4/55 selective soldering machine, we also have a system of the latest product generation. What speaks for us: -Contact person for prototypes, large or small series -A high mix of components is not a problem -We test the technical feasibility of your project before each order -We are not just a service provider, but a technology partner: A+B Electronic thinks through your project with you and together we can bring it to successful series production

Suitable for every order size: SMD assembly is one of our core competencies Our SMD assembly is characterized by modern production standards and a low error rate. Stencil printers and a jet printer are available in front of our three production lines. This means that we are as flexible as possible when preparing your project. The SMD components are precisely applied in our pick and place machines and soldered in reflow ovens, or in special cases also in our vapor phase. A highlight: We have a hybrid assembly machine, the FUJI 7x NXT2. This is our way to work with the greatest precision, quickly and safely. What speaks for us: -Your Contact person for prototypes, large or small series -A high mix of components is not a problem -We test the technical feasibility of your project before each order -We are not just a service provider, but a technology partner: A+B Electronic thinks through your project with you and together we can bring it to successful series production