Compacting - Import export

CEDS synchronous motors offer you special advantages: Very high acceleration capacity Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability Very high speeds can be achieved Reinforced winding insulation for high dielectric strength and the associated better resistance to partial discharge within the winding Quiet running Low reactive power requirement Synchronous operation of several drives even with different loads In most cases, the rotor of a synchronous machine is designed as a permanent magnet rotor and also has a damper cage to ensure smooth, stable operation of the drive. The interaction of the two magnetic fields of the stator and rotor results in a rotary movement. The operating behavior of the synchronous motor is more dynamic than that of the asynchronous machine

CEDS servo motors offer you special advantages: Very high acceleration capacity Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability, torque density and power density High positioning accuracy High speeds can be achieved High dynamics due to the low mass inertia Reinforced winding insulation for high dielectric strength Quiet running Low reactive power requirement Synchronous operation of several drives using a frequency converter Magnetically lockable by the control of the frequency converter Both DC, synchronous and asynchronous motors can be designed as servomotors. Together with a servo amplifier, they then form the servo drive. It can be used to precisely regulate the torque, the speed or the position. For this purpose, the current position of the rotor is always measured with a rotary encoder, e.g. an incremental encoder.

CEDS motor - kits offer you special advantages: Very high acceleration capacity Integrated motors for your application Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability, torque density and power density High positioning accuracy High speeds can be achieved High dynamics due to the low mass inertia Reinforced winding insulation for high dielectric strength Quiet running Low reactive power requirement Synchronous operation of several drives using a frequency converter Magnetically lockable by the control of the frequency converter Motor - kits can be designed as synchronous, asynchronous, servo or torque motor kits. These can be perfectly integrated into a complete system and save the customer a lot of space and unnecessary connections and wear parts like bearings.

Tabletop Basic line -Weatherproof Heat-resistant UV-resistant Available in different measures

Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free

With the manufacture of compacting containers for use in municipal vehicle construction, decades of expertise and know-how go into the implementation of every product. In accordance with the requirements, we implement the container manufacture and, if the customer requests it, take over both internal coating and external painting. The production range includes volume-optimised 37 – 43 m³ vehicle bodies.

2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch

The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module

Tecnimodern's slanted or vertical form fill and seal machines with very low loading height allow the production of polyethylene or polypropylene film bags from a flat film roll. The film can be neutral or coloured, with continuous printing or centred with print mark. These TEC30 packaging machines have the advantage that they can be equipped with either a thermal sealing system for heat-sealed films or an impulse sealing system for polyethylene films, depending on requirements. To meet the need for all types of packaging, feeding and product shapes, we offer various automatic feeding systems, such as: - Counting with vibrating or centrifugal trays - Weighing with linear scales - Dosing by augers or volumetric feeders

The Gronemeyer aluminium compact system has stood the test of time for transporting small products in very tight spaces. The design allows for a mostly non-cutting and fast installation. Common hinged belt chains and drive engines are used. Here your requests can be taken into account. The drives are delivered as slip-on gears or with chain drive. The modular construction allows them to be re-used later for a new conveyor path. Supports, railing brackets, sensors, etc. can be positioned and affixed to the profile as desired with slot nuts. Technical data: —Conveyor body material: Aluminium/stainless steel —Conveyor body width: 90 mm —Chain width: 82.5 mm —Conveying speed: up to 80 m/min Optional equipment: —Moving deflecting pulleys —Product guides, design depending on product —Supports to stabilize the conveyor systems at the desired conveying height —Other accessories, such as sensors, stoppers, etc.

MiniTherm GV4730 temperature transmitter hygienic design ◼Compact stainless steel case ◼Temperature measuring transmitter for installation in a separate thermowell in hygienic design ◼Temperature range -50 … 200 °C ◼Measuring insert, spring loaded ◼Compact, small design ◼High-resolution graphic display with intuitive user interface and background lighting ◼Accuracy of 0.1% of the set measuring range ◼Quick set-up function ◼Measuring resistance Pt100 ◼Process connection bottom or back ◼According to 3A requirements

Pressure transmitter PASCAL CV4 threaded connection, type series CV4100 Features Compact case of stainless steel in hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0.25 bar to 400 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Table function with up to 32 support points (in preparation) Wetted parts stainless steel Process connection: screw-in thread with internal diaphragm Options Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate per EN 10204 Calibration certificate per EN 102044

Features ■ Digital pressure transmitter with IO-Link V1.1 output signal ■ Data transmission rate COM 3 (230.4 kBaud) ■ Hygienic design as per EHEDG recommendation ■ Accuracy ≤ 0.3 % ■ Case and wetted parts of stainless steel, degree of protection IP 65 ■ Nominal range -400…400 mbar up to -1…100 bar ■ 2 switching outputs maximum Additional features ■ Approvals/Certificates - Material certificate per EN 10204 - Calibration certificate per EN 10204 - Roughness height rating with inspection certificate acc. to EN 10204-3.1 ■ Hygienic design ■ Wetted parts electropolished Application The pressure transmitter COMPACT with IO-Link is suited for measuring the relative pressure of gases, vapors and liquids. Due to the case design as per EHEDG recommendation and various process connections, the transmitter is suitable for the hygienic requirements of plant and machinery engineering.

Features Measurement of relative pressure of gases, vapours and liquids Output signal: 4…20 mA, 2-wire technology Stainless steel case, degree of protection IP 65 Easy zero setting by means of a magnet Accuracy ≤ 0.5 % Options: Output signal (invers) 20…4 mA Accuracy ≤ 0.3 % Hygienic design

Pressure transmitter COMPACT Features: Measuring ranges 0…250 mbar up to 0…100 bar Linearity error including hysteresis <+ 0.2 % f.s. Piezoresistive measuring system Hygienic design according to EHEDG, FDA and GMP recommendations Material and surface quality according to the hygienic requirements Wetted parts of stainless steel; completely welded Stainless steel housing as standard or field housing Degree of protection IP 65, IP 67 option Output signal: 4…20 mA Process temperature up to 200 °C Options: Explosion protection for gases Classification per SIL 2 Inspection certificate: material certificate as per DIN EN 10204-3.1

CEDS torque motors offer you special advantages: Light and compact design Very high torques can be represented High speed constancy High positioning accuracy Low detent torque Low rated speed Big hollow shaft Very quiet Low inertia, therefore very dynamic Very high force density Long life span Torque motors are characterized by a very compact design in combination with a very high torque at low speed. A high force density in relation to the installation space and a low cogging torque are further points that a torque motor fulfills. CEDS DURADRIVE torque motors are designed to save space and have a high level of positioning accuracy. These motors are very often used instead of gear solutions and minimize wear and backlash during positioning.