Results for
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve KA 2 - NA Details as for KA 2 Additional equipped with a proximity switch for control of needle (open/close). nozzle and needle : stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5mm Ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve KA 2/Airless The automatic spray valve KA 2/Airless is an airless spray valve. The fluid will be squeezed through the spray valve and thereby atomized. Because of it´s low weight and the small measurements the KA 2/Airless is ideal for all applications with low space requirements. needle seat and needle: stainless steel
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE AIRLESS-spray valve S 830 Spray valve without atomizing air. Connections of valve on under-side. Control of S 830 via external pneumatic valves. Max. material pressure: 250 bar All standard airless nozzles can be fitted to the S 830. needle seat and needle : tungsten carbide
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE extrusion valve MVV The mini extrusion valves of series MVV are designed for the application of oils, release agents and other thin liquids. The application can be done punctiform or linear. nozzle + needle: stainless steel available nozzle dimensions: 0,2/0,3/0,4/0,5/0,6/0,8 mm Ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve GF / 5 with quick release adapter Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve GF / 4 Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nnozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm Ø Also available in HVLP-technique
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve GF / 3 Designed for spraying colours, paints etc. With integrated atomizing air valve for regulation of purging air. Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE MINI-spray valve MSV with quick release adapter The special of the series MSV with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve KA 2 PEEK The automatic spray valve KA 2, made from PEEK, has a weight of 35 gram! only. Also fluids, which may react with metallic materials, could sprayed with this valve made from PEEK.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve KA 2 with quick release adapter The special of the series KA 2 with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve ASV with quick release adapter The special of the series ASV with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve KA 2 needle controlled spray valve in small design. Suitable for thin liquids as f.i. release agents and oils. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø flatspray or roundspray pattern depending on aircap
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve ASV pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... .Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve MMFS pneumatically controlled roundspray valve. Designed for spraying signature- and marking colours. Very fine and small sprayjet. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 2,0 mm ø roundspray aircap
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve MFS pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... . Also in version MFS/KLS available. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø flatspray or roundspray pattern depending on aircap
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE spray valve GF / 1 + GF / 2 These spray valves are robust apparatuses for application of colours, paints. Also suitable for spraying release agents and glues. nozzle and needle: stainless steel available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5; 3,0; 3,5 mm ø. flatspray or roundspray pattern
Request for a quoteResults for
Automatic valve - Import exportNumber of results
25 ProductsCountries