Torque sensors - Import export

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-L Series Torque Transducers are designed to work with both System 4 / System 5 and System 8 Digital Torque Testers. These transducers incorporate an integral “L” bracket to facilitate horizontal or vertical mounting, such as for a bench or mobile (cart) application. Features and Benefits: - L-bracket has two (2) holes, 5/16” diameter, 3.25” on center on each leg of bracket. - Designed to be mounted to a bench or cart - very quickly. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - DTT System 8

The gateway to the finest in torque measurement tools! TT-Series Torque Transducers are designed to work with Sturtevant Richmont Digital Torque Testers or the like. Features: - Integrated SR mounting flange - Can be mounted to ML 250 Mechanical Loader. - Can be Mounted to Quad Plate for multiple mounting on ML 250. - Smaller sizes (up to 400 in.oz.) can be mounted to SSMB, STMB, or UMB brackets. - Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket. Related Products: - Mechanical Loader ML - DTT System 8 Optional Components: - 10293 = Detachable Signal Cable ca. 1,20 m * - 10153 = Single Mounting L-Bracket UMB (500 ft.lb and above) - 10154 = Triple Mounting L-Bracket STMB (up tp 400 in.oz) - 10601 = Switchbox 4-Way - 870776 = Square Adapter 1/4"f x 3/8"m - 870777 = Square Adapter 3/8"f x 1/2"m - 870778 = Square Adapter 1/2"f x 3/4"m - 870779 = Square Adapter 3/4"f x 1/1"m

The most accurate digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.25% (indicated value) from 10% to 100% - Over capacity alert and tracking System 8 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. System 8 has an LED that flashes red to alert you to the problem. It doesn’t stop until you reset the unit. The display also tells you the unit has been stretched over capacity. System 8 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to “See Supervisor 120% Over Capacity”. No other torque tester on the market does this.

The CheckStar Multi is the latest generation of Crane Electronics market leading CheckStar in line rotary torque transducer. It raises the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. If angle is specified, the CheckStar Multi rotary torque transducer will include an angle encoder giving 0.125° resolution (720 PPR). It also incorporates a light ring, giving the user visual feedback of the status of a tightening, when used with a Crane readout or data collector. The CheckStar Multi fits in line between the assembly tool and the fastener, measuring the actual torques applied and angular rotation of the fastener, under production conditions. Whatever the vibration and shock loads experienced, CheckStar Multi’s patented contact system ensures a connection is always maintained between the readout and the strain gauges. [...]

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-QC series torque transducers are designed to work with System 8 Digital Torque Tester when used with ML 1000 and ML 2000 Mechanical Loaders. These transducers use Quick Connect baseplates that are a feature of the loader system. Features and Benefits: - Hex mounting flange style. - Can be mounted to ML 250 and ML 600 mechanical loaders. - All up to 250 lbf·ft capacity can be mounted to Quad Plate for multi-transducer mounting on the ML 250. - Smaller sizes (up to 300 lbf·in capacity) can be mounted to STMB or UMB brackets for use with a bench or table. - Larger sizes can be mounted on UMB L-bracket. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - Mechanical Loader ML - DTT System 8

Workbench mounted Torque Transducer. Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. For best results with impulse tools we recommend the use of a Crane CheckStar rotary torque transducer with a suitable joint kit rather than a stationary transducer. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective off line test for verification of assembly tool performance. Key Features: - Static accuracy ± 0.25% FSD (bi-directional) - Plug and Play with Crane display systems (UTA) - Combine with joint kits for workshop simulation of hard to soft joints - Built-in workbench mounting flange - Rugged and durable construction, aluminium housing, stainless steel shaft - Ingress protection rating IP40.

Rotary Transducer with Angle Measurement Option CheckStar sets the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. CheckStar transducers fit in-line between the assembly tool and the fastener, measuring the actual torques applied under production conditions. Whatever the vibration and shock loads experienced, CheckStar's patented contact system ensures contact is always maintained between the readout and the strain gauges. Inferior systems suffer from "brush bounce" that leads to unreliable torque readings. The low inertia design of CheckStar ensures accurate and repeatable measurement of high speed transients, such as the point of shut-off on continuous drive tools and the pulsing of impulse tools.

Electric Impulse Tool with Torque Control and Angle Monitoring. The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. The angle sensor is an extremely compact (PAT) rotary encoder that detects both angle as well as direction by 1 degree, signal transmission contactless. Due to the newly developed outer rotor servo motor and the composite body, the Yokota system e-wrench has the lightest weight in its class. For cooling of the motor it is equipped with a fan that reduces motor size (and weight at the same time). For cooling of the impulse unit it is equipped with a separate fan. [...

Hybrid Technology – Smart Assembly Solutions The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]