Results for
FERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Oil drum grab for Ferrum DM yard loader / wheel loader requires 3rd control circuit On request for almost all FERRUM models Recommended for the models: Wheel loader Ferrum DM308 x4 V2 (conditional) Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteFERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
hydraulic bale grabber for straw bales / hay bales for Ferrum DM yard loader / wheel loader suitable for many of our wheel loader and yard loader models Of course with connection for quick coupler requires 3rd control circuit to open and close the grab The width of the forks without exiting at the push of the lever adjustable recommended for using different bale dimensions Recommended for: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteBÜRKLE GMBH
Germany
Packaging bucket for transport, packaging and storing of various materials. Suitable for the food or building material industries and non-aggressive chemicals in environmental protection, hospitals and the household. With strong handle. Quality closure on the bucket for product safety.
Request for a quoteBÜRKLE GMBH
Germany
The bucket is made entirely of high-gloss polished stainless steel. The smooth surface of the stainless steel bucket makes it easy to clean. The rounded, movable handle makes it comfortable to move the bucket. The laboratory bucket is suitable for moving liquids and bulk materials properly, especially in the chemical, pharmaceutical or cosmetic industries, and in the food and animal feed industries.
Request for a quoteFERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Grab bucket 3 for FERRUM wheel loader , here approx. 0.8m³ with a width of 1.80 m with 2 locking cylinders Without teeth Requires 3rd control circuit Other dimensions if necessary on request (possibly also different price ) On request for almost all FERRUM models Recommended for the models: Wheel loader Ferrum DM308 x4 V2 (conditional) Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteFERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Grab bucket 2 for FERRUM wheel loader , here approx. 0.8m³ with a width of 1.80 m Without teeth Other dimensions if necessary on request (possibly also different price) => Recommended for almost all FERRUM models on request for the models: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteFERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Grab bucket ads for Ferrum DM yard loader / wheel loader suitable for the models from the listing The grab bucket requires a 3rd control circuit for opening / closing gripper unit The device offers a connection for quick coupler For a small surcharge we can also supply any other recording appropriately . All we need are the exact dimensions and a drawing and an offer to be able to create. Please contact us if you need it, we will be happy to offer our help. Recommended for: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
Use your AirWave1 and the AirWave2 air cushion machine with the mobile coiler unit. Ideal for the production of wide type 8 air cushion mats at an ideal height for grabbing. By activating a side button, the air cushion machine and the winding unit are activated. The mobile winding unit has an integrated sensor which stops winding once the maximum coiler size has been reached. The coiler unit has a separate power connector for the AirWave1 or AirWave2. Only a single power connection is needed for the roll coiler. Package Contents: Mobile coiler unit including power connection for the AirWave1 / AirWave2 Electronic winding unit incl. Start / stop function Dimension (without air cushion machine or air cushions): 106x50x121 cm (LxWxH)
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with internal or external holding ropes. Technical design Low-maintenance or maintenance-free design, which benefits both the environment and your profitability Transverse or longitudinal suspension with 3-fold, 4-fold and 5-fold rope reeving; as 2-rope and 4-rope grabs High load capacity thanks to its lightweight design Smooth grab thanks to its low centre of gravity and because the rope’s diameter matches that of the pulley Retracted pivots for easy grab under the ship’s gangway Large plastered surface to grip the residual charge Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Lower pulley block unrestrained on the crossbeam Rope pulley bearing: Plain bearing KROGER MAINTENANCE-FREE pulley block system Grab shells: Material: S355J2+N
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Overview of the main rope grab features for which we offer spare parts: Grab shells All bearings Pulleys Guide rollers Suspension
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Overview of the main motor grab features for which we offer spare parts: Grab shells All bearings Hydraulic cylinders Control blocks Hydraulic pumps Motors Suspension
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
We are well prepared for quick repairs, which means shorter downtimes for our clients. We know what downtime means for our customers. Which is why we develop and manufacture superior, robust products. Our maintenance-free rope and motor grabs contribute to both environmental protection and economic efficiency. Because maintenance-free means no need for lubricants, no time spent greasing and no wear. However, even our KROGER grab sometimes require spare parts, inspections or repairs after repeatedly lifting maximum loads. We are here to help you when you need it. We can guarantee quick repair as we always have access to our KROGER grab ’ spare parts. We will ship the required parts to you as quickly as possible. The use of original KROGER spare parts can improve your grabs’ long-term performance. Please refer to your grab’s technical documentation for its spare parts delivery scope.
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Competent, reliable and efficient. As experienced grab systems specialists, we professionally repair and restore all makes of grabs. We always have the main spare parts for KROGER rope and motor grabs in stock in our warehouse, whether you require them for a revision, quick on-site damage repair, repairs caused by wear-and-tear or refurbishment. We either make quick repairs on site or take your machinery to our workshop for more comprehensive refurbishments. Contact us, we will be happy to advise you.
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Ideal for use in refuse-derived fuel (RDF) incineration plants for the handling of materials such as wood chips, shredded plastic or tires, paper and cardboard scraps, pellets and/or fluff. Mainly used in cement, paper and industrial plants (high heat-value areas). Technical design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Both motor grab systems (MZG and MMGM) can be made fully automatic by attaching sensors MZG is ideal for use in tight spaces Lightweight design for high load capacity Size, measurements and grab suspension can be customised according to your needs Further advantages: see type MZG port and type MMGM (under “products/motor grab systems) Grab drive Vertical electrohydraulic drive unit with high-pressure pump Turn control or valve control
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Refuse-derived fuel (RDF) is no problem for our KRÖGER grab systems. They can be specially modified for RDF and their compact design makes them suitable for fully-automatic operation in tight spaces. And, of course, they are maintenance-free.
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Handling general scrap, steel chips, shredder scrap, wood chippings and much more, in sea and inland ports and at storage facilities. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Open, half-closed or closed grip; with 2, 4 or 5 shells Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells made of: Shell plates made of S355J2+N Welded shell tips made of special highly wear-resistant steel
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Half-closed or closed grip; with 2 or 4 cylinders Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells adapted to material flow: Shell plates made of S355J2+N Cutting edges made of special, highly wear-resistant steel
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
METZEN INDUSTRIES GMBH
Germany
Underwater gravel and sand extraction using dredgers with 2-cable or 4-cable winches. Suitable for use in all river and lake dredging areas with difficult ground conditions and deep dredging depths. Technical design MAINTENANCE-FREE design, which benefits both the environment and your profitability High load capacity thanks to its lightweight design Robust, torsion-resistant grab design for maximum loads Grab shells made of wear-resistant fine-grain steel Tooth tips are interchangeable depending on ground conditions KROGER MAINTENANCE-FREE bearing system in the shell pivots and cylinder rod bearings KROGER power unit is easy to service, the crosshead engine is separate from the hydraulic tank, hydraulic units are in the tank Environmentally friendly hydraulic fluid using organic oil
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding cables. Technical design Designed as a discharge grab with stable, retracted pivot bearings Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Grab shells: Shell design adapted to material flow Toothed segment drive Material: S355J2+N
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes which operate using hooks or rope/chain suspension. Technical design Open shell design Suitable for handling all kinds of waste Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing: Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Bulk handling of any kind in sea and inland ports or storage facilities. The compact alternative to the MZG type grab for ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy grab under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Horizontal electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab shells: Material: S355J2+N Grab connection bearing: re-greaseable, robust steel bushing bearing Small grab dimensions thanks
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Handling timber, stacked wood, etc., for downstream industries, in sea and inland ports or at storage facilities. For ship-to-ship, ship-to-storage/wagon/lorry handling. For various types of crane with control systems designed for hydraulic grab systems. Technical design Designed to grip stacked wood, with two interlocking shells to grip one or several logs Optimisation of crane load capacity thanks to its lightweight design which can grip maximum amounts Slim shell design for optimal penetration Wear-resistant cutting edges The hydraulic system’s dimensions, short open and close times and high closing pressure guarantee the quick grab and secure hold of the logs Protected and easily accessible inbuilt electro-hydraulic propulsion motor Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed.
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy gripping under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing: Re-greaseable steel bushing bearing Stable, torsion-resistant design using direct cylinder linkage
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Motor grab systems. A wide range of maintenance-free products Manufactured for tough yet smooth bulk load handling – in sea and inland ports, gravel and sand extraction, and waste processing – our KRÖGER motor grab systems are available in a variety of designs and all come with the KRÖGER “maintenance-free” advantage. To protect the environment and maximise your efficiency.
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Underwater gravel and sand extraction using dredgers and rope excavators with 2 or 4 ropes. Suitable for use in all river and lake dredging areas with difficult ground conditions and at dredging depths of over 100m. Technical design MAINTENANCE-FREE design, which benefits both the environment and your profitability 5-rope or 7-rope reeving design in all sizes Larger capacity for increased output Lightweight design, optimised grip Closing rope infeed in star form on the grab head with the KRÖGER MAINTENANCE-FREE, rope-protecting pulley system Fixed linkage steering on one side of the grab head KRÖGER MAINTENANCE-FREE pulley block system Grab shells made of wear-resistant fine-grain steel Grab connection bearing with the KRÖGER MAINTENANCE-FREE bearing system Tooth tips are interchangeable depending on ground conditions
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability 4-rope grab with half-closed grip Suitable for handling waste of any kind Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Solid, removable rope guards Rope pulley bearing: Re-greaseable plain bearing KROGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KROGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N with a wear-resistant edge recessing made of Pantanax steel
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability Transverse or longitudinal suspension with 4-fold, 5-fold and 7-fold rope reeving; as a 4-rope grab High load capacity thanks to its lightweight design Smooth grab thanks to its low centre of gravity and because the rope’s diameter matches that of the pulley Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Lower pulley block unrestrained on the crossbeam Rope pulley bearing: Re-greaseable plain bearing KROGER MAINTENANCE-FREE pulley block system Grab shells: Material: S355J2+N Cutting edge material: special, highly wear-resistant steel Grab connection bearing: Re-greaseable steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system
Request for a quoteMETZEN INDUSTRIES GMBH
Germany
Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding ropes. Technical design As 2-rope and 4-rope grabs with open, half-closed or closed grip Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Closing rope devices: Rope nozzles KRÖGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Rope pulley bearing: Re-greaseable plain bearing KRÖGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N.
Request for a quoteResults for
Grabs - Import exportNumber of results
34 ProductsCountries
Company type