Gps - Import export

It features a quick start plug-in system that allows you to turn it on simply by plugging it together, which makes it an easy-to-use and complete system. Also the Rover rod features satellites such as GPS, GLONASS, Galileo, BeiDou, and more, ensuring that you get the most accurate readings possible. It also comes equipped with a powerful Helix antenna and Bluetooth connection to the rover rod up to 50 meters, eliminating the need for any annoying cables. The transport length of the rod is only 104cm, making it easy to carry around. It is robust and absolutely waterproof with a protection class of IP68, and it also features an integrated battery that can last for up to 10 hours with a percentage status display. This high-quality product is made in Schleswig-Holstein by Thomastechnik GmbH.

The GP 150 consists of a modular cage system with variable width and height for large profile channels (circular, egg, box profiles as well as profiles with dry weather channel). It is designed to enable the user to process a corresponding profile size with as few components and assembly work as possible. With only five plug-in connections and three screw connections, a maximum body size of DN 4,000 can be achieved.

High-precision potentiometric rotary sensor with reduction gear

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.

The Raytek GP infrared pyrometers come with two types of rugged sensors: GPR and GPS. They both provide standard or close focus optics and target temperature readings with 1% accuracy. In addition, the laser sighted GPS model provides alignment in hard-to-reach locations, or to small or distant targets. The GPS is capable of measuring targets as as small as 4.5 mm (.18 in) and 35:1 spot size at 200 mm (8 in) distance, for the close focus version of the sensor. The GPS targets temperatures from -18 to 540ºC (0 to 1000ºF) with 1% accuracy, and has a standard optical D:S ratio of 50:1. The GPS integrated coaxial Class 2 laser is connected to the remote activation switch box via the included 4 m (13 ft) cable. An additional 8 m (26 ft) of cable is also included to connect the switch box to the GP monitor.

Constructed with a single layer of advanced structural reinforcement and utilizing the same proven silicone rubber wear surface, Airflex® is the preferred solution for large mixed fleets at some of the most prestigious airline operators worldwide. For technical data, color, design choices and dimensions, please see our technical data sheet here. AIRFLEX GP Datasheet Product Flyer

Light, spherical, mineral and ferrite-free glass beads blasting abrasive WIWOX® GP. Ideal for bright, matt-gloss surfaces. The area of application ranges from the cleaning of delicate tools to the deburring of precision parts through to the finishing of precious and non-ferrous metals.

Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

The right drive solution for any application: 24V DC permanent magnet with 110W output power. Combined with the RPL050 planetary gearbox, the result is a compact drive for many industrial and mobile applications. Gear ratios i = 5, 7, 10, 25, 35, 50, 100 Output speeds between 600-30 rpm Rated torques S1 between 1.7Nm and 7Nm Backlash 1-stage <=10 arcmin / 2-stage <=14Nm Protection class IP54 Design B14 If you have any questions or require further information, please contact our sales team.

Compact two-stage worm gear motor with solid shaft. GP-SN4F worm gear motor: Motor power available in 57W and 90W Supply voltage 24VDC High gear ratio range between 10:1 and 5000:1 Output speeds between 0.6 and 300 rpm (depending on the gearbox ratio) Effective torques between 1.5 and 7.8 Nm (depending on the gearbox ratio) Cable version (IP40) and terminal box version (IP54) Customizing options: — Shaft dimensions according to customer specifications — Flange dimensions according to customer specifications — Adaptation of motor power and supply voltage Do you have questions about our worm gear motor or need help with the selection? Our sales team will be happy to contact you in order to find the right gear motor for your application!

The base fuse manipulator was developed for cutting SAP, MC, GP and AP bombs. After it is applied to the base of the bomb, the water abrasive jet cuts out the detonator. Alternatively, the manipulator can be configured to cut away the entire bomb base together with the detonator.

Optimized receiver and antenna combination Ultra-Sensitive Hornet offers an optimized receiver and antenna combination with unconditional frequency stability, improved noise immunity, higher sensitivity, and enhanced SNR (Signal to Noise) levels. The optimized combination not only decreases the footprint, but also minimizes design risks and reduces time to market. Small form factor Measuring only 17x17x4.8mm and weighing 4.7 gr., Ultra-Sensitive Hornet is a small fully integra

The perforated metal plank type BZ-GP has been developed from our approved planking type BZ-GP. Because of the homogeneous surface it is easy to negotiate. Furthermore the free cross section of 70 % makes a high light permeability and sprinkler suitability possible. Therefore the profile is particularly suitable for suspended ceilings. There is no need for sprinkler systems below the suspended ceiling. Due to the high point loads, additional planking during the assembly or later is not necessary. Thus, an ideal smoke funnel, sprinkler suitability and efficiency are guaranteed.

The NanoTracker is a portable personal tracking device powered by a rechargeable battery. NanoTracker is freely configurable and can be used in various everyday situations to locate people, animals or objects by GPS. The small tracking device can be carried comfortably in the pocket, on a keyring or on the dog collar and has various alarm functions depending on the programming: 'Panic-Button' for an emergency call in dangerous situations 'Geofencing' for alarming when leaving a defined geographic zone 'Wellness' function, which can be detected by an accelerometer if the device is not moved for a certain period of time and sends an emergency call. The NanoTracker uses a SIRF 4 GPS chipset and an IoT Cellular module from Telit, which uses the 2G, 3G or 4G standard depending on the version. With a 350mAH battery, NanoTracker can deliver up to 4 working days. Batteries and other recommended accessories can be found in the 'Accessories' tab. Furthermore, the device has an...

The CloudGate M2M Gateway from Option is connecting devices to the cloud platform with smoother and more secured connection. The module has many new features: ignition sensing &amp; timed wake-up, expanded RAM, Flash and a SD memory slot - which is great for running more sophisticated applications. Problems that are associated with wireless M2M connectivity can be resolved by the CloudGate automatically. Integrated software and hardware watchdogs are monitoring each component. The module is very secure while it uses passwords and/or certificates for management functions. CloudGate has two empty slots for enhancing the module. The expansion slots are simple and quick to install. CloudGate is easy to setup. First define start-up configuration on the CloudGate provisioning server, CloudGate will automatically install the configuration and any custom middleware. After which the module is ready to work. CloudGate has CE, FCC, IC and PTCRB certifications.

The TER-HN910-EU from Round Solutions offers a complete solution for GSM/UMTS and GPS applications. The TER-HN910-EU is based on the Telit HE910-EUG module. The terminal module has an integrated watchdog feature. The frequency bands for GSM are 850/900/1800/1900 MHz and for UMTS/HSPA+ are 850/900/2100 MHz. Communication can be achieved via RS232 and a USB connector. The RS232 is a D-Type 9 pin female connector. The USB connector is a Type B USB and is a high retention connector. This terminal has two SMA connectors - one for Cellular and the other for GPS antenna. It is advised to use the 5 band antenna with 2.5 dB gain for Cellular and/or the active GPS antenna wit 25-28 dB gain for the GPS SMA connector. The device has IP 40 protection class and the operating temperature is from -20°C to +55°C. The TER-HN910-EU hardware components are fully compliant with the EU RoHS and WEEE Directives. The TER-HN-910-EU is for the European market.

Pico-SensoTrack is a small wearable tracking device that can receive GPS and Glonass positioning data and send it in realtime over 2G mobile network to your cloud. It has a built-in battery and can be used in a variety of everyday applications for persons, animals or items to be located using GPS. The small tracking device fits easily in your pocket, can be carried on a key ring or on a dog collar and has several alarm functions, depending on the programming: • ''Geofencing'' to alert when leaving a defined geographical zone • ''Wellness''-Function that detects when the device has not moved for a certain period via accelerometer and sends an emergency call The Pico-SensoTrack uses a GNSS chipset and a 2G module from Telit. The device is battery-powered and under normal working conditions, the 350mAH battery lasts up to 4 working days. Furthermore, the device has an accelerometer to detect a movement / idle states to enable/disable the modem and the GPS module to preserve the...

GSM GPS Antenna GSM-FME/F-GPS-FME/M Cables 24cm