Glass caps - Import export

Glass domes, stepped glasses, flat glasses, oil sight glasses, signal lights, signal glasses

Glass domes, stepped glasses, flat glasses, oil sight glasses, signal lights, signal glasses

Plastic free cover cap for glass bottles

Innovation and quality is our key to success. Since the company foundation HUBTEX has set standards with a number of developments and product improvements. The feedback of our worldwide customers is incorporated into the development and the design of new vehicles so that different market requirements can be met in the best possible manner. MU60AC-SO for packed glass “end caps” quick-change device for fork and load support access to the control station from the normal drivers cabin

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments; ideal for applications in which space is limited Features ▪ Cap diameter of Ø70 mm / Ø2.76 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) or male NPT thread (ANSI B1.20.1) ▪ Bayonet version with a six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2 Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Socket made of Steel, zinc-plated ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Mounting set including bayonet flange, steel or plastic basket (800 μm), gaskets and bolts ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air...

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Features ▪ Cap diameter of Ø30 mm / Ø1.18 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Air filter element ƒƒ▪ Anti-splash feature ƒƒ▪ Plastic dipstick with integrated anti-splash feature ƒƒ▪ Plastic dipstick with integrated magnet

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Handles in various designs and dimensions: — ergonomic design and finger protection — electrostatically discharging — with/without bore and cover caps Front handle, handle, bridge handle, machine handle, comfort handle Material selection: — Plastic PA glass fibre reinforced, black — Plastic PA glass-ball reinforced, black System handle Material selection end piedes: — Plastic PA glass-ball reinforced, black Material selection tubes: — Carbon fibre, glossy finish — Aluminium, anodised — stainless steel — Steel plastik covered Strip handle Material selection handle strip: — Aluminium Material selection cover caps: — PA glass-fibre reinforced plastic Other sizes, other colors on request

Angle connector 45°, for easy connection of two aluminium profiles at 45° angle without profile machining Different sizes and versions: — Profile 20, 30, 40, 45, 60, 80, 90 — Profile 25/1"; 51/25 - 2"/10"; 38 - 1,5"; 76/38 - 3"/1,5" — Profile slot 5; 6.5; 8; 10 Material: — Die-cast aluminium blank or aluminium color — Zinc Di-Cast blank or aluminium colot various models/designs: — Single — with cover cap plastic PA, glass fibre reinforced; optionally incl. mounting set Other surfaces, other colors on request! Translated with www.DeepL.com/Translator (free version)

Alu Connection Angle for aluminum profiles 40 & 40x80 To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover cap Color/Material: Angle: Aluminum die-cast; alu color lacquered Cover cap: Plastic PA, glass fiber reinforced; Black or gray Countersunk nuts: Zinc plated Magnet rhombus screws: Steel Other surfaces, other colors on request

Evian 24x330ml plastic bottles Evian 20x330ml glass bottles Evian Sports Cap 12x750ml plastic bottles Evian 12x750ml glass bottles Evian 6x1ltr plastic bottles Evian 12x1.5ltr plastic bottles Evian 6x2ltr plastic bottles We offer stickering service in various languages.