Gear design - Import export

Through hollow shaft Ø 14 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Compact, low-cost design. Potentiometer or power output. Easy mounting.

Solid shaft Ø 4 mm or Ø 6 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Integrated slip clutch to protect the potentiometer. Compact design. Potentiometer, power or voltage output. IP65 protection category.

Lubrication of heavy loaded toothed gears and worm gears exposed to outdoor conditions and/or low temperatures, as well as tilted or vertical shafts, especially with gear designs which are not oil-tight Lubrication of friction bearings with minimal bearing clearance or high circumferential speeds Advantages and benefits Long-term lubrication due to excellent resistance to oxidation and ageing Wear reduction at maximum loading Prevents leakage with angled or vertical shafts due to good adhesion on metallic surfaces Flowing structure prevents grooving in gear units with continuous coverage of surfaces

Compact design with through hollow shaft Profile GP02: Through hollow shaft Ø 14 mm Adaptation to various measurement distances owing to a wide range of gear ratios Compact, low-cost design Potentiometer or power output Easy mounting

The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2

Wire-actuated encoder with analog output, potentiometric, current source or voltage output, with a measuring length of up to 6000mm. Easy adjustment of the output signal to the actual measuring length via integrated gear mechanism. Robust design. Measurement lengths up to max. 6000 mm. Potentiometer, voltage or power output. Housing made of aluminum and plastic. Potentiometer/resistance range adapted to actual measurement length via an integrated gear. Various wire types.

BORSIG has been manufacturing centrifugal compressors for process gases for almost 60 years. The BORSIG centrifugal compressor series comprises multistage integrally geared centrifugal compressors with up to 8 stages, with steam turbine, gas turbine or electric motor as driver with all auxiliary equipment (turnkey solutions) according to customer’s requirements. The compressors comply with the corresponding API design standards such as API 617 (chapter 3) and 672 (4th edition). The oil system is designed according to API 614 or manufacturer's standard. The development is based on the latest research results in fluid mechanics as well as in gear and bearing design.

The design of the Dyna Gear range has been infl uenced by extremely varied applications within many industry sectors. The Dyna Gear range has been developed with a highly dynamic servo drive solution in mind and therefore benefi ts from many advantages. Dynamic and Precision in small format - our new size Dyna Gear D37 is designed for highly dynamic servo drive solutions in compact applications.

Design Gear – The customised special gearbox For everyone who expects more: special gearboxes from the specialist. We provide gear solutions for your individual performance requirements, including designs, tooth developments, prototype manufacture, extensive tests and documentation, right up to the delivery of the series. Our customised gears include: Single-stage bevel gears as control or reverse gears Labyrinth-sealed gears with a degree of efficiency of > 98% High temperature gears for ambient temperatures of up to 300°C Saw drive gears Test station gears with output speeds of up to 12000 min -1 Double gears with two transmission ratios Robotic gears Spur gears High precision gears And much more

Single-stage gear drive with solid shaft Gear Type: SN18 Motor Type: AC-Three-Phase 230/400V (Also available: DC 180/200V, DC-Permanent-Magnet 24V) Mounting: Gear Foot / Flange Shaft design: Solid Shaft Ø10x30 Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

TNZ ZCA: Double engagement design with integrated O-ring seal The TSCHAN® TNZ ZCA coupling is a torsionally stiff gear coupling designed to have some backlash and consists of two coupling halves that are connected by fitted bolts. TNZ ZCB: Double engagement design with a bolt-on O-ring carrier for ease of installation Unlike the TNZ ZCA coupling, the TNZ ZCB comes with a bolt-on O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved.

haacon hebetechnik gmbh expands its standard range to include rack and pinion winches with fastening lugs for wall mounting. The serial drive type is a spring-loaded safety crank (SiFeKu), which holds the load in any desired position under tensile and compressive loading. The winch can be utilised in any position. The winches are produced in three load classes: 1.5 t 3 t 5 t. The robust design with milled gear rack and hardened gear components is suitable for use in harsh applications. The crank handle can be moved for space efficiency. Special designs with other rack and pinion lengths, detachable crank design, assembled fastening options can be supplied at short notice.

Trailer landing gear, short design, static load 50 t, dyn. load 24 t, with compensating or rocking foot, full length welded back plate, matching to 'Mega-Trailer'- vehicles

CEDS geared motors offer you special advantages: Special designs Connection dimensions according to specifications Adapted translation Several drive shafts are possible depending on the application Optimized design, reduced weight Reduced noise emissions Storage adapted to the application Long lifetime Lower maintenance intervals Robust design High efficiency Compact design Gear motors can work with the correct ratio in the optimal speed range and generate very high torques. They are also suitable for direct drives with low speeds. Depending on the requirements, different gear variants are used, such as Spur gears, flat gears, worm gears, axle gears, flat gears, axial and coaxial gears, planetary or cyclone gears. Each type of transmission has its own advantages, which are used depending on the need and needs.

Eickhoff has been a renowned manufacturer of axle drives for rail vehicles such as locomotives and track work vehicles for more than five decades. The wheelset drives can be designed as bevel gears, spur gears or customized solutions, so that they optimally meet the performance requirements. We meet the high-quality standards in the field of transport technology thanks to our many years of experience in service and more than 2000 newly delivered final drives. Our gearboxes are robust, durable and designed for use under extreme conditions.