Gate valves - Import export

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled with it. This inexpensive version represents a real alternative to pneumatic actuators. Position electronics Analog stroke feedback Limit switch Fail safe feature . . .

The compact sliding gate motor valve Type 8230 in reinforced design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be excellently controlled. Using supercapacitor technology, the valve returns to its defined basic position when the power supply fails. This competitively priced version with its metal body is a true alternative to pneumatic actuators. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . .

The sliding gate motor valve type 8038 in reinforced design with highresolution fast actuatoris suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be handled precisely. The interaction of highprecision control electronics with the precise stepper motor results in a positioning accuracy of ± 0.2% even with a valve stroke of only 6 mm. By means of supercapacitor technology, in the event of a power supply failure, the valve returns to its defined basic position. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature

The reinforced version of the type 8037 sliding gate motor valve is suitable for use in potentially explosive atmospheres in accordance with Directive 94/9EG. Media such as steam, liquids, gases etc. can be excellently controlled with this motor valve, even in hazardous areas. Metal bellows Position electronics Analog stroke feedback Limit switch . . . Ex zones 1, 2, 21 and 22 Protection class I 2G Ex de (ia) IIC T6/T5 or T4 (gas version) Protection class II 2D Ex tD (iaD) A21 IP 66 T80C (dust version)

The sliding gate motor valve type 8036 in reinforced design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Voltage 230 VAC, 110/120 V AC, 24 VAC, 24 VDC

The reinforced version of the type 8035 sliding gate motor valve features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

The sliding gate motor valve type 8035 features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . . Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

The sliding gate motor valve type 8030 in reinforced design is suitable for a wide range of process applicationsis suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can pefectly be controlled with this valve. Metal bellows Position electronics Analog stroke feedback Limit switch Control actuators or 3point actuators Thrust 0.9 kN; 2 kN; 4.5 kN Voltage 230 VAC, 24 VAC, 400 V, 24 VDC

The sliding gate motor valve type 8030 is suitable for a wide range of process applicationsis suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can pefectly be controlled with this valve. Metal bellows Position electronics Analog stroke feedback Limit switch . . . Control actuators or 3point actuators Thrust 0.9 kN; 2 kN; 4.5 kN Voltage 230 VAC, 24 VAC, 400 V, 24 VDC

The sliding gate valve type 8041 in the short design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. This sliding gate valve with its small stroke achieves a very high cycle capacity combined with extremely fast cycle times. Metal bellows Limit switch Pilot valve Stroke limitation . . .

The sliding gate valve type 8040 in reinforced design and long construction is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The sliding gate valve type 8040 in the long design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The pneumatic sliding gate control valve type 8028 with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life. Digital positioner type 8049 Positioner type 8049 in explosionproof version Positioner with integrated process controller type 8049 IPC Metal bellows Limit switch Position feedback Pilot valve . . .

The high temperature sliding gate valve type 8023 in reinforced GS3 design with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Moreover for high speed and cycling applications this valve is a clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The highpressure sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be precisely controlled even at high operating and differential pressures. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The sliding gate control valve Type 8020 in reinforced GS3 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve

The low temperature sliding gate control valve type 8026 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be precisely controlled even in the lowtemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Limit switch Position feedback Manual override Pilot valve . . .

Installation set valve valve, type: Rigid, version round bars

Installation set valve valve, type: rigid, version square

Installation Set slide valve, type: Adjustable

Telescopic Spindle Extension T2 for gate valves. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Two-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and waterrepellent. Optional: Marking disc (double sided gas and water) as well as bell adapters/sealing inserts.

Telescopic Spindle Extension T3 with position indicator. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter

Telescopic Spindle Extension T3 - Stainless steel (DIN3223 C and E) A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.

Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) accord. to DIN 3223 E made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150n. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Three-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.