Gas pumps - Import export

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

In order to be able to meet the individual requirements of our customers, we offer various types of spiral wound gaskets: For example, you can choose between standard versions with a smooth surface and various special models. All articles are based on a stainless steel strip and high-quality filling materials such as graphite and PTFE, which underlines the excellent quality standard. The spiral wound gaskets of billi are characterized by a constant elasticity during hot-cold cycles. Classical applications in the chemical industry include all types of gas lines, directional valves and pumps. Furthermore, spiral wound gaskets are the optimal solutions for pressure vessel openings in steam systems as well as low and high pressure in nuclear power plants. For the best possible functionality of spiral wound gaskets, the careful considered choice of model is of central importance: the versions with centering ring, for example, assures an ideal fit between the bolts.

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The 7G injectors are pumps for pumping and mixing various media. The basic principle is simple: a gaseous media is used for the actuator; this media escapes at high pressure and high speed from a nozzle. During this process the media from the surrounding area is also drawn along and can be supplied to the downstream production process. Due to their design, the injectors do not need moving parts, as a result they have very low wear and are robust.

Global energy consumption is constantly rising. The raw material required for vehicle operation, energy production and other products is predominantly based on crude oil and natural gas. Screw pumps are often used in the production of these valuable commodities. For decades, Leistritz has been an expert partner for the oil and gas industry, whether for pumping tasks in crude oil production using multi-phase pumps, transfer and injection pumps or in the transportation of crude oil using booster or pipeline start-up pumps. Leistritz pumps are also used in refinery processes.

The BCpreFerm is a whole gas analysis for scale-up processes. Made for the analysis of metabolic processes, the model is composed of up to 6 CO2- and O2-senors, a BACCom data multiplexer box, and the BlueVis-software for automatic data recording. Growth is controlled through a parallel analysis of CO2 and O2, a display of OTR, CTR and RQ, and through defined trial conditions. The system uses a modular design which enables connection to shake flasks, as well as to fermenters. It can also be attached to existing bioreactors. The use of additional gas coolers, lines, pumps and valves, and the complicated processing of gases is no longer necessary. The instrument can be used for cultivations in shake flasks and fermenters and further applications.

The GAS TESTER is our lowestprice entrylevel model for monitoring gas concentration. Naturally we have installed our proven analysis technology in this product as well. Features reliable concentration measurements compact and handy design easy operability argon and krypton use optional data storage Only a small quantity of gas is required. Sampling is executed with a special gas supply pump. The GAS TESTER is suitable for quality control of IG units with argon or krypton as the filling gas. If you desire to also analyse other gas types or gas mixtures, you should chose one of our other analysers.

The gas detetctor pump for easy usage in difficult situations The manual Dräger Accuro is used for short time measurements of Dräger tubes. Often measurements take place in extreme situations, for example: ladders, shaft or under heavy respiratory protection. The gas detector pump Accuro is easy to operate with one hand The gas detector pump Accuro is easy to operate with one hand and enables reliable measurements at hardly accessible places. This pump is a bellow pump in which the air is sucked stroke wise through the tubes. The body of the pump consists of a bellow, which is pressed together completely for measurements. After release of bellows, the sucking drains automatically and the relevant measured gas is sucked by the insert tube. The sucking process is finished when the body of the pump is completely open again. The end of stoke can be read by a pressure controlled display in pump head of Dräger Accuro. Data sheet

The compact and reliable gas detector GasAlertMax XT of the company BW-Technologies provides effective protection against 4 different dangerous gases at the same time. Due to simple one-button operation the device is perfect suitable for a broaden range of industrial applications. Moreover, thanks to intelligent, newest integrated pump technology long distance samples in containers or enclosed rooms are possible. Features of GasAlertMaxXT II: Permanent display up to 4 gases concentrates in real-time at once Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Impact- and water-resistant Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages (German, English, French, Spanish, Portuguese) Technical data Dimensions (cm): 13.1 x 7.0 x 5.2 Weight (g): 316 Application temperature:...

The robust and reliable gas detector Triple Plus-IR of Crowcon provides effective protection against up to four gases of various dangerous gases at the same time. With the help of modern pump technology and hydrocarbon- infrared- recognition for measurement of hydrocarbons (in the unit measurement % LEL and vol.%), it is especially adventurous for monitoring of inert atmospheres (e.g. tank cleaning) Features of Triple Plus-IR Permanent display up to 4 gases in real time at the same time. Shock- and waterproof Self test of all functions of sensor, battery, electronic and acoustic/optical alarm Bright, wide-angle flashing alarm display Free adjustable alarm points Integrated gas probe pump with reliable membrane technology PC- interface for configuration of device Technical data of Triple Plus-IR Size (cm): 11,8 x 16,7 x 7,3) Weight (g): 900 Application temperature: -20 up to +50°C Alarm: optical, vibration and acoustic (95dB) low, high, Stel, MAK, OL (exceedance of measuring...

With the robust and reliable gas detector GasAlertMicro5 of BW-Technologies, it is possible to measure and to control up to five dangerous gases at the same time. Thanks to intelligent, integrated pump technology (optional) long distance samples in containers or enclosed rooms are possible, and is suitable for a broaden range of industrial applications. GasAlertMicro5 is available as standard version for toxic and flammable gases, as well as PID version for detection of volatile organic compound or as IR-version for detection of carbon monoxide. Features of GasAlertMicro5 Permanent display up to 5 gases concentrates in real-time at once Impact- and water-resistant Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages...

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)