Front panels - Import export

The aluminium front panel displayed was printed with texts using the vacuum process. The milled recesses are delivered on special CNC milling machines to customer specification. On the rear of the panel, threaded bolts made from stainless steel and earthing screws can be pressed in. Contact I have read and agree to the privacy policy. *Pflichtfelder

RockWorks is a real-time management system for RockNet and enhances the remote operation of complex widespread networks. Each RockNet device can be monitored and con gured on screen according to the front panel operation. RockWorks enables labeling of each device and channel within the network. The software provides alarm indications and allows for a network- wide default reset of channel parameters and naming. For a more comfortable setup, RockWorks also features an offline editor. RockWorks MY Card Preset Dialog The RockWorks preset dialog provides full access to RockNet MY interface card presets and allows for the individual configuration of emulation mode, channel routing, microphone pre-amp count (RN.301.MI/RN.101.IO) as well as sync master settings. A total of 15 presets (1...9, A...F) can be configured. Presets are activated by using the rotary switch on the front panel of the RockNet MY cards. In order to enable maximum flexibility in routing, the number of dropped...

Riedel’s Tango TNG-200 offers powerful processing capabilities, 2 integrated Riedel Digital Partylines, 2 RAVENNA/AES67 and AVB compatible ports, 2 Ethernet ports, 1 option slot, and redundant power supplies. Tango TNG-200 is 1.5 RU high and features a low mounting depth and a low noise design. Most Riedel current and legacy Intercom panels, including the new 2300 Smartpanel, are fully compatible with Tango. The sunlight readable, high-resolution, full-color TFT display ensures perfect readability at all times, extending the range of possible applications and providing maximum ease of use. The intuitive front panel controls enable users to easily recall presets and adjust audio levels. Riedel’s Tango TNG-200 is an efficient stand-alone solution and a perfect example of German Engineering. Shaped perfectly to your needs, Tango is the flexible platform for today's and upcoming standards in the broadcast, theater and event environment. The unit’s intuitive front-panel controls...

Riedel’s Tango TNG-200 offers powerful processing capabilities, 2 integrated Riedel Digital Partylines, 2 RAVENNA/AES67 and AVB compatible ports, 2 Ethernet ports, 1 option slot, and redundant power supplies. Tango TNG-200 is 1.5 RU high and features a low mounting depth and a low noise design. Most Riedel current and legacy Intercom panels, including the new 2300 Smartpanel, are fully compatible with Tango. The sunlight readable, high-resolution, full-color TFT display ensures perfect readability at all times, extending the range of possible applications and providing maximum ease of use. The intuitive front panel controls enable users to easily recall presets and adjust audio levels. Riedel’s Tango TNG-200 is an efficient stand-alone solution and a perfect example of German Engineering. Shaped perfectly to your needs, Tango is the flexible platform for today's and upcoming standards in the broadcast, theater and event environment. The unit’s intuitive front-panel controls...

The Tango TNG-200 is Riedel’s first fully-networked platform based on the AVB and RAVENNA/AES67 standards. With its own dedicated Intercom application, it can be turned into a cutting-edge and flexible solution for a variety of communications scenarios. Riedel’s Tango TNG-200 offers powerful processing capabilities, 2 integrated Riedel Digital Partylines, 2 RAVENNA/AES67 and AVB compatible ports, 2 Ethernet ports, 1 option slot, and redundant power supplies. Tango TNG-200 is 1.5 RU high and features a low mounting depth and a low noise design. Most Riedel current and legacy Intercom panels, including the new 2300 Smartpanel, are fully compatible with Tango. The sunlight readable, high-resolution, full-color TFT display ensures perfect readability at all times, extending the range of possible applications and providing maximum ease of use. The intuitive front panel controls enable users to easily recall presets and adjust audio levels. Riedel’s Tango TNG-200 is an efficient...

HighIntensity lightcuring with patented intensity adjustment technology. Features: - >17,000 mW/cm² initial intensity - Patented intensity adjustment feature - Easy to use and adjust - Easytoread, lighted front panel LCD display - Improved user interface for easier operation - Up to 2,000 hours useful bulb life - Compatible with liquid, fiber, singlepole, or multipole lightguides - Integrate with pedal or PLC - Extended exposure time settings to 9,999.9 seconds - Controlled powerup sequence ensures proper temperature - Integral shutter with digital timer - Fast bulb replacement - Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation - Smooth front panel for easy cleaning

Naturally, we also make “simple” furniture parts for other manufacturers according to any given design or pattern. Examples include bedposts, straight frame or solidwood doors, handles, moulding strips, bases and plinth pieces, drawer front panels, etc. As a systems supplier and reliable partner, we provide both simple and complex items made in our own workshop and crafted according to your exact specifications.

As a supplier to the furniture industry, we manufacture bent or roundcut fronts of solid wood in a variety of wood types (beech, oak, maple, red alder, etc.). For example, our products include solid wood doors, front panels for drawers, round frame doors, and doors for display cabinets. With respect to 3D features, our use of 5axis CNC technology allows us to realise every element with the utmost precision radii, contours, borings, mitre joints, etc. Do you have special requirements for the cut and surface finish? No problem!

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

The Only Person-Portable GC/MS That Identifies VOCs and SVOCs Quick, Easy, Accurate On-Site Performance HAPSITE ER is the only person-portable Gas Chromatograph/Mass Spectrometer (GC/MS) that requires minimal training to deliver qualitative and quantitative lab-quality results-in the field, in less than 10 minutes. In fact, all the operator has to do is push a button to begin identifying and quantifying volatile organic compounds (VOCs), toxic industrial chemicals (TICs), toxic industrial materials (TIMs), chemical warfare agents (CWAs), and select semi-volatile organic compounds (SVOCs). HAPSITE ER has the capability to identify analytes in the PPM (parts per million) - PPT (parts per trillion) range. The GC column provides sharp chromatography and excellent resolution. During the quantitation method, the front panel clearly displays what chemicals are present, their concentration, and access to information regarding the degree of danger - to help make quick decisions...

Use a modern communication tool for your advertising message. You can hang the high-quality silver frame with black front panel from the ceiling. Use the included wire suspension for this purpose. Your double-sided advertising is uniformly illuminated thanks to modern LED technology and a special acrylic diffuser. Give pictures and posters an attractive beam. The black passe-partout of the protective screen create an elegant note. The screen is attached and detached by means of a magnetic holder which eases the media. Use the illuminated customer stopper in retail, advertising agency or exhibition area. The "Ecomag" illuminated frame is supplied with power via a 3.5 metre long cable. The mains plug is used for switching the frame on and off. On request we can offer you a suitable advertising insert.

Extendable leaflet stand for mobile use at exhibitions and events. The exhibition stand unfolds in seconds using a clever technique to become a stable display which can be filled on one side. The folding leaflet stand consists of a silver painted MDF base together with a silver anodised aluminium scissor fold frame and is supplied with 4 A4 portrait leaflet holders in impact resistant polycarbonate (fill depth of each: approx. 30 mm). Feature: each leaflet holder has a practical section at the side to prevent leaflets folding over! The tiered layout of elegant leaflet holders offers a full view on the inserted content and guarantees easy removal of the material. In combination with a divider (optional extra) each holder can be converted to suit ⅓ A4 leaflets. A transparent pocket on the front panel allows for an A4 sheet to be inserted; Customise your folding leaflet stand to each occasion - without a frame, protected from dust, quickly and easily!

In addition to complete OEM devices, Gronbach produces a wide range of mechanical components for the household appliance industry, which are characterised by dimensional accuracy and durability. Our products can be used both in the visible area of kitchens and gastronomic facilities and as ready-to-install functional components. We develop and produce material- and production-optimized according to your specific requirements. In addition, we develop and produce material- and production-optimised designs of assemblies according to individual customer-specific requirements, e.g. hinges, front panels, frames and pull-outs, and assemble these ready for installation. We realize small series of special products as well as large series.

The versatile, innovative weighing solution for truck silo / vessel weighing. The Weight Indicator X2 is available in a robust aluminium housing for front panel mounting and a stainless steel housing for field and table top mounting with FLP enclosure for hazardous zone. Utmost interference suppression and long term stability guarantees optimum use in harsh environments. 25 mm backlit transflective LCD display allows a good readability even under difficult conditions like direct sunlight. The high-quality sense-amplifier supports 4/6 wire load cells and allows connections over long distances without losing accuracy. Additional security is guaranteed by fully galvanically isolated sensor input circuit.

The CC-3000 light-duty operating enclosure is particularly suitable for encapsulating operator control panels, industrial computers and display components and, thanks to its modular concept, can be simply adapted to versions tailored to specific customer requirements. — Customised solutions to your specifications — Monitor-based industrial design — Freely selectable width and height (max. 600 x 600 mm) — Depths from 120 mm up to max. 255 mm — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Five possible enclosure designs — Optimum heat dissipation due to aluminium sections — Front panels internally-mounted or externally-mounted — Protection class IP65 — Screw-fixed or hinged rear panel — Internal grooves for fixing components — Extensive range of accessories

The aluminium control enclosure CC-5000 neXt offers a unique design with a number of accessories such as the status light. The rounded contours ensure the enclosure is highly recognisable in machinery and mechanical engineering applications. — Customised solutions to your specifications — Innovative and modern industrial design — Freely selectable width and height (max. 1.000 x 1.000 mm) — Depths from 75 mm up to max. 370 mm — Rounded edges, no risk of physical injury — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Optimum heat dissipation due to aluminium sections — Integrated recessed grips for simple handling — Protection class IP65 — Internally-mounted front panel — Door configurations for direct access to the interior — Slimline design for configuring flat screen systems

The patented gwk solution includes cold water temperature controllers that can be operated without glycol in the temperature range between 0 °C and 25 °C. The user can select between two models that are differing in cooling capacity and flow rate. A precise microprocessor control with simultaneous indication of nominal and actual value, the simple one-touch operation, optional interfaces at the front panel and external sensor connection, splash-water proofed electrics and the cabling with CEE-socket ready for connection make the unit ready for immediate use. Leak stop operation, mould draining, acoustic alarm, automatic filling and top up, additional manual filling possibility for conditioned water, strainer in the cooling water connection and parts out of corrosion resistant materials that are in contact with the medium are part of the comprehensive standard equipment.

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC offers a comprehensive range of M8x2 and M12x1 sockets for reflow soldering processes. Insulation bodies and female/male sockets are available in different positions and different codings for front panel mounting. The male sockets come with gold-plated contacts, guaranteeing minimum 100 mating cycles. Options are installation heights of 6 mm, 10 mm, 9 mm and 13 mm and versions with or without shielding. The sockets are available as individual parts for manual mounting or as tape & reel packaging for automatic mounting.

The external front is intended to connect to generators which do not have an integrated display. It is best suited to adjust generators that are difficult to reach. Therefore, the external front is mounted separately from the generator. Its compact design makes it much easier to accommodate than a generator. The external front is intended for use with just one generator.

SANHA®-Heat Distribution cabinet, surface-mounted, with galvanised installation frame, painted white (RAL 9010) front panel, with removable door and locking bolt, installation depth 110-150 mm.

The Vacuum Chamber VC P305X300 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 370 mm, 620 mm) Width: 305 mm Height: 300 mm Front panel (optional): 9 U (1 U = 44.45 mm) Connections 1 x KF 16 5 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P700D is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 1000 mm, 1400 mm) Inner diameter: 640 Ø Outer diameter: 700 Ø Front panel (optional): 18 U (1 U = 44.45 mm) Connections 2 x KF 16 2 x KF 40 2 x ISO K 63 Additional flanges possible in any position

The Vacuum Chamber VC P400x400 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 625 mm) Width: 400 mm Height: 400 mm Front panel (optional): 10 U (1 U = 44.45 mm) Connections 1 x KF 16 6 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P400X600 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 625 mm) Width: 400 mm Height: 600 mm Front panel (optional): 16 U (1 U = 44.45 mm) Connections 1 x KF 16 7 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P110x120 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 300 mm, 600 mm) Width: 110 mm Height: 120 mm Front panel (optional): 5 U (1 U = 44.45 mm) Connections 3 x KF 16 Zusätzliche Flansche in beliebiger Position möglich

The Vacuum Chamber VC P150x160 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 325 mm, 600 mm) Width: 150 mm Height: 160 mm Front panel (optional): 6 U (1 U = 44.45 mm) Connections 4 x KF 16 1 x KF 40 Additional flanges possible in any position