Results for
SONDERMANN PUMPEN + FILTER GMBH & CO. KG
Germany
Universal drive control for utmost efficiency MAGSON magnetically coupled centrifugal pumps are extremely efficient by nature. Using the SFU frequency converter for optimum adjustment to changing conditions, this efficiency will increase even more. Thanks to leading-edge control technology, the SFU permanently adjusts the discharge rate to specific requirements. Whenever the rate has to be reduced or the pump has to be operated with changing volume flows, using a frequency converter will save you lots of money. Thus, the power required by a pump running at half speed is only 12% of the original demand. So the system operates with optimum efficiency but saves a lot of energy, especially in part-load operation.
Request for a quoteHIMMELWERK HOCH- UND MITTELFREQUENZANLAGEN GMBH
Germany
Our mid range frequency converters are delivering up to 250 kW output at frequencies down to 4 kHz. For high frequencies up to 2 MHz we have our high frequency converter series HU.
Request for a quoteHIMMELWERK HOCH- UND MITTELFREQUENZANLAGEN GMBH
Germany
Our high frequency converters are providing frequencies of up to 2 MHz at up to 200 kW output. For lower frequencies down to 4 kHz we have our mid range frequency converter series MU.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
With frequency converter for variabel cutting speed setting. For belt sanding steel, titanium and other metals.
Request for a quoteBVS ELECTRONICS GMBH
Germany
SEW automation solutions With the drive technologies manufactured by SEW, we offer a variety of solutions for a wide range of industries. These are optimally matched to your application and can be used flexibly. Choose from a large variety of frequency converters from the Movidrive, Movitrac, Movidyn and Moviaxis product ranges and benefit from our highquality repairs and other services. The portfolio also includes a number of different motors, servo motors, synchronous motors and geared motors. Since 01.07.2018 we are also an official service partner for SEWEURODRIVE GmbH & Co. KG. With the new, longterm partnership and the even closer and more direct cooperation with the manufacturer resulting from it, you will now be able to make further use of improved services centred around the entire SEWEURODRIVE product portfolio.
Request for a quoteBVS ELECTRONICS GMBH
Germany
Lenze drive technology Regardless of whether you require motors, gear units or specific drive elements, we have an extensive selection of products manufactured by Lenze to meet your exact requirements. This includes frequency converters and servo motors as well as various accessories, such as signal and power cables, function modules, handheld terminals and mounting kits. We not only complete repairs for products manufactured by Lenze but also sell and service these modules.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
Different stirring elements and agitator speeds possible, adapted to your application, product density, viscosity and solid content Lockable IBC fastening crossbeam for IBC containers 400 to 2,500 litre capacity, with forklift truck adapter Addition of liquids under stirring possible, by connection nozzle at the IBC mounting crossbar Material: stainless steel 304 / 316Ti (product contacted parts) Geared motors in various power ratings optional with speed adjustment via attached frequency converter On/Off switch with motor protection and CEE plug with low voltage release FIELD OF APPLICATIONS
Request for a quotePRESSTA EISELE GMBH
Germany
A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)
Request for a quoteLUTZ PUMPEN GMBH
Germany
The MEMDOS LB solenoid-driven diaphragm dosing pump is the ideal solution for applications where the pump needs to be integrated into control systems or control loops. Thanks to its robust plunger drive and the option of manual or automatic capacity adjustment, the MEMDOS LB reliably and precisely doses various media such as acids, alkalis, precipitants and flocculants. The dosing capacity is adjusted either by mechanically adjusting the stroke length or by controlling the speed of the three-phase motor via a separate frequency converter. This flexibility enables precise control of the flow rate to meet different requirements. On request, the MEMDOS LB is also available with a double diaphragm system, which offers additional safety and reliability. This combination of versatile control and robust design makes the MEMDOS LB the ideal choice for demanding dosing tasks.
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on: —Machines —Servo systems —Motor vehicles —Test benches —Production plants The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M series mixers can be supplied as follows:
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
CR-M - Electric tote tank mixer for stainless steel IBCs The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M...
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Immersion Pumps Our multistage pump models TC25...TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 600 l/min Delivery head: up to 225 m Please contact us for delivery quantity
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WEINLICH GMBH & CO. KG
Germany
Particularly for testing passenger car engines, truck engines and transmission units with combustion engines, when - the electric mains is too weak for frequency converters, - cooling water is not available or water-cooling is not desired, - air-cooled eddy-current brakes are not sufficient.
Request for a quoteHUGO BRENNENSTUHL GMBH & CO. KG
Germany
Adapter enabling electrical equipment using an earthed socket system to be used in countries with the British plug system. This travel adapter is not a transformer or a frequency converter. Childproof socket. With 13 A fuse. In blister packaging. Max. load: 13 A/250 V
Request for a quoteHUGO BRENNENSTUHL GMBH & CO. KG
Germany
7 versions for use in over 150 countries. Safe, universal mains adapter enabling electrical equipment with a European plug system to be plugged into other types of power point abroad. Easy and safe to use. With earthed socket outlet. Seven plug adapters. Childproof socket. Fabric assortment bag included. Travel plugs are not transformers or frequency converters. With 10 A fuse. Max. load: 10 A/250 V in compliance with national regulations Plug-in system: DE
Request for a quoteTOPTICA PHOTONICS AG
Germany
The TA-FHG pro is a tunable, diode-based laser source in the deep UV spectral range. The system consists of an external cavity diode laser, a high power semiconductor amplifier (TA), and two cascaded second harmonic generation stages (SHG pro). Alternatively, it can be equipped with a fiber amplifier (FA) or Raman fiber amplifier (RFA). It provides tunable laser radiation for spectroscopy, laser cooling, holography and interferometry.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The revolutionary TOPO by TOPTICA stands alone as the only fully automated, continuous-wave, singly-resonant optical parametric oscillator laser source on the market. High resolution spectroscopy across 1.45 – 4.0 µm (2500 – 6900 cm-1) has never been easier. TOPTICA’s unique optical design enables broadly tunable laser light. No module or mirror exchange is necessary. Additionally, the all-digital control electronics enable hands-free coarse tuning, and frequency locking. A wide mode-hop-free tuning range up to 300 GHz (10 cm-1) enables visibility of full spectroscopic signatures. Simultaneously, the TOPO maintains a narrow linewidth (2 MHz, 1·10-5 cm-1) giving a solution that reveals narrow atomic and molecular features.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The TA-SHG pro system, part of the UV / RGB solutions, comprises a tunable diode laser, a high power semiconductor (TA) and an integrated frequency doubling stage (SHG pro). Alternatively, it is available with a fiber (FA) or Raman fiber (RFA) amplifier. The SHG stage is a folded ring cavity in bow-tie configuration with excellent thermal and mechanical stability. The system now includes fully-automated push-button coupling optimization into the TA chip, the SHG cavity and the output fiber, as well as output power stabilization. It provides tunable laser radiation for spectroscopy, laser cooling, optical data storage, holography and interferometry.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The grating stabilized diode laser SHG pro is a medium power solution, for applications such as spectroscopy of atoms, ions and molecules, laser cooling and interferometry. Designed in TOPTICA’s proprietary pro technology, it combines best performance and ease-of-use – at moderate initial and operating costs. The system now includes fully-automated push-button coupling optimization into the SHG cavity and the output fiber. The package comprises a solid laser head and a DLC pro control rack. It can be upgraded to a TA-SHG pro, if an appropriate amplifier source is available.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The SHG pro is the device of choice if existing lasers are to be frequency doubled. Designed in TOPTICA’s pro technology, it unites highly stable performance and convenient operation. Mirror and crystal holders can be adjusted without opening the resonator cover. A wide range of non-linear crystals covers SHG wavelengths from 190 to 800 nm. TOPTICA offers competent support for adapting the unit to customer requirements.
Request for a quoteKNAUER ENGINEERING GMBH INDUSTRIEANLAGEN & CO. KG
Germany
The H igh F requency vibrators of this series have to be operated with a frequency converter or inverter. If operated with a frequency inverter an rpm adjustment can be realised with little effort. Matching standard or custom made power supplies for the vibrators can be offered. Special Features are: • Centrifugal force from 4 kN to 20 kN • Speed from 1000 RPM to 6000 RPM
Request for a quoteLLOYD DYNAMOWERKE GMBH
Germany
Our compact asynchronous motors are distinguished by high torques in combination with a small size. They are highly dynamic with a low inertial moment, with a proven design as well as electromagnetically compatible for optimal, compact performance levels. We develop our compact asynchronous motors specially as speed-controlled drivers and for a supply from frequency converters. They also consist of a flexible platform system and can be adapted to specific customer requirements. The housing is angular and jacketless. Being ventilated by a separately driven fan, the motors can constantly deliver the full torque over the entire speed range. The optimised control behaviour with converter operation means that these machines can replace DC machines.
Request for a quoteMIXACO MASCHINENBAU
Germany
MIXACO High-Speed Mixer A high friction rate is achieved by circumferential speeds of 15-40 m/s, resulting in intensive heating of the product. The required power input can be regulated flexibly. The MIXACO high-speed mixer can be extended by many additional functions and adapted for individual mixing tasks, so it is a particularly cost-effective solution for customized integration into new or existing production workflows. All Benefits at a Glance * Flexible deployment for a wide variety of applications e.g. heating, agglomerating, coating or dispersing * Process-optimized mixing tools guarantee optimum power input * Frequency converter for variable, product-appropriate power input settings * Wide range of additional functions allow ideal adaptation to your specific mixing tasks or installation space requirements * ATEX version possible
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
Siempelkamp has developed the energy-ecient drive system EcoDrive for the ContiRoll® main drives. This system meets tomorrow’s legal and standard demands on the energy eciency of drive systems already today. It comprises frequency converters, motor and gearbox - all well-tuned to one another. In addition to the energy eciency our R&D-work focussed on an improved precision and controllability of the entire drive system. The focus is on high belt speeds, precise r.p.m. for a synchronous operation of the steel belts, torques adjusted to the characteristic load line in connection with the hydraulic pressure/position control, good performance, good uptimes and ease of maintenance. This corresponds to the demand on a very high product quality and an on-demand energy consumption even in partial load operation. This new drive system is able to save more than 10 % of the electrical drive energy compared to traditional Solutions.
Request for a quoteResults for
Frequency converter - Import exportNumber of results
45 ProductsCountries
Company type
Category