Results for
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas SUNTEST XLS+ is an with state-of-the-art UV-control for reliable R&D screening tests. The benchtop design fits into every lab while optional accessories – water spray, immersion, refrigeration – expand the testing capabilities and offer easy ways to customize it to your needs. It comes standard with a 1100 cm 2 exposure area, suiting multiple flat or 3D samples. 1x 1700 W air-cooled Xenon Lamps 1100 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and Control of Irradiance in the wavelength range 300-800 nm / Lux; or 300-400 nm / 340 nm Measurement and Control of Black Standard Temperature (BST); BPT optional Measurement of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Bench-top design 90 x 54 x 62 cm Static, horizontal exposure area for flat or 3D specimen Temperature control of BST in the range 45-100 °C; BPT 45-95 °C Fan-controlled temperature difference between Chamber Temperature and BST Light cassette including non-ageing aluminium reflector, uncoated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Irradiance control wide band 300 – 800 nm (Lux) or narrow band 300 – 400 nm BST/BPT exchange kit
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas SUNTEST XXL+ FD is a large state-of-the-art xenon flatbed instrument. It’s completely target designed to meet the testing needs of the FMCG industry, such as drinks, foodstuffs, personal care or household products. XXL+ FD enables consumer goods manufacturers to test their products realistically within very short test times, typically with acceleration factors between 10-30 versus real time. It’s for reliable qualification of stable product formulations, determination of appropriate packaging materials, and supporting product shelflife claims. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and Control of Irradiance 300-400 nm / 340nm or 420nm Measurement and Control of Black Standard (BST); (Black Panel optional) Measurement and Control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Thermal insulation of test chamber and periphery preventing water condensation Temperature control selectable either via CHT (15° * - 70 °C; *with chiller) or via CHT and BST (25° * - 100 °C; *with chiller) simultaneously (dual control) Adapted chiller SunCool XXL+ for testing at low temperatures in the range 15-30°C CHT; detachable for standard weathering testing needs Ultrasonic humidification system for controlled humidity during operation without SunCool Specimen spray system with integrated 60 l water reservoir for spray cycles at 25°C ** - 70°C Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Sliding sample table for easy specimen loading; exposure area (WxD) 74 x 37 cm
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas SUNTEST XXL+ is a large state-of-the-art xenon flatbed instrument. The 3000 cm2 test chamber is perfect for high volume weathering testing of large flat or 3-D specimen. SUNTEST XXL+ offers a complete set of features ideal for standard testing covering all common industry weathering standards. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and control of Irradiance 300-400 nm / 340nm or 420nm Measurement and control of Black Standard (BST); (Black Panel optional) Measurement and control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Various specimen holders to hold different panel sizes. XenoCal sensors to calibrate BST and irradiance. Large variety of filter systems: coated and uncoated quartz, special UV glass, daylight filter, window glass, Solar ID 65, Solar Standard, to meet various spectral specifications in standards.
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Xenotest 440 is a highly versatile xenon weathering instrument for a variety of materials. Designed for fast and economical testing, the Xenotest 440 utilizes XenoLogic™, a revolutionary new twin-lamp operating technology which enables high irradiance levels of 120 W/m 2 of total UV radiation. In addition, XenoLogic provides extended lamp service life. With this new technology, the two xenon lamps combined can last over 4000 hours under standard testing levels of 40-60 W/m 2. 2 x 2200W air-cooled xenon lamps 2310 cm 2 exposure area XenoLogic TM lamp operating technology for extended lamp service life Touch screen with color display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400 nm) Direct Setting and Control of Black Standard Temperature (BST) Direct Setting and Control of Chamber Temperature (CHT) Direct Setting and Control of Relative Humidity Display of Diagnostic Messages Storage for 10 user-defined tests Multi-Language Capability: English, German, Italian, French, Spanish, Turkish, Dutch, Polish, Hungarian, Czech, Japanese, Korean, Chinese On-rack XENOSENSIV® RC-34 BST for measuring and controlling irradiance (in W/m²) in the wavelength range 300-400 nm and BST (°C) on specimen level Selectable temperature control either by Chamber Temperature (up to 65 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 115 °C) simultaneously Fan-controlled temperature difference between BST and CHT Ultrasonic humidifier controlling relative humidity in the range 10-75% (Light cycle) Integrated 60 litre water reservoir for humidity control and specimen spray (automatic refill) Specimen spray system Rotating specimen rack with 38 test positions (13.5 cm x 4.5 cm); 33 (10.0 cm x 6.8 cm); 22 (13.5 cm x 5.5 cm); 11 (29.5 cm x 7.0 cm) Pre-programmed lightfastness and weathering standards Outer cylinder made of special UV glass UV-protected test chamber window Internal memory chip for storing instrument data Data output via Memory Card or serial interface RS232 Ethernet interface for XenoTouch Add-ons (Remote Control, E-Mail Service, Online Monitoring) XENOSENSIV RC-420 BPT
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The 220 is a large capacity lightfastness tester dedicated for textile testing. It comes with premium on-rack light and temperature sensor and non-aging optical filter technology. With the ability to test 38 samples, the 220 provides nearly twice as much capacity in the same footprint compared to 150S+. The combination of its large test chamber and the efficient use of power and water make it today’s most economic air-cooled instrument available. It complies to standards ISO 105 B02, AATCC TM16 (option 3), and Marks & Spencer C9, C9A. 1x 2200 W air-cooled Xenon Lamp 2310 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400 nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Message Storage for 10 user-defined tests Multilingual User Interface Non-aging filter systems for ISO 105-B02 and AATCC TM16 On-rack XENOSENSIV® for measuring and controlling irradiance (in W/m²) and Black Standard Temperature on sample level Selectable temperature control either by Chamber Temperature (up to 65 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 100 °C) simultaneously Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system with integrated 60l water reservoir for humidity control (automatic refill) Sample rack suiting 19 sample holders with capacity for 38 standard textile samples Pre-programmed standards ISO 105 B02 and AATCC TM16-2004 (Option 3) Switch-off by radiant exposure, light exposure or total operating time UV-protected test chamber window Advanced Auto Start functions Internal memory chip for storing instrument data Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) XenoCal BB 300-400 XenoCal BB 300-400 BST XenoCal BST
Do you sell or make similar products?
Sign up to europages and have your products listed
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Xenotest Beta+ is a premium stand-alone rotating rack xenon instrument with 4000cm 2 exposure area. It comes serially with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. Beta+ complies with the vast majority of industry standards. Due to its large test chamber and highly reliable performance, it’s ideal for larger capacities or sample sizes. 3x 2200 W air-cooled Xenon Lamps 4000 cm 2 exposure area High-irradiance testing up to 120 W/m 2 (2 Sun) Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400 nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test methods Multilingual User Interface Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window On-rack XENOSENSIV 300-400 nm for measuring and controlling irradiance (in W/m 2) and BST (C°) on sample level Selectable Temperature control either by Chamber Temperature (max. 70 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 130 °C) Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Outer cylinder made of Special UV glass Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via memory card or RS 232 interface Ethernet interface for connection to internal computer network and use of XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Thermoprinter XenoCal WST White Standard Thermometer XenoCal BST Black Standard Thermometer Rack spray system XenoCal BB 300-400 Irradiance Sensor XenoCal WB 300-800 Irradiance Sensor XenoCal NB 340 Irradiance Sensor
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
Xenotest Alpha+ is a compact stand-alone rotating rack xenon instrument with 1320cm 2 exposure area. It comes serially with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. Alpha+ complies with the vast majority of industry standards setting the benchmark in narrow tolerance testing. Due to its highly reliable performance, it’s often chosen by R&D departments or commercial Service Test Houses. 1x 2200 W air-cooled Xenon Lamp 1320 cm 2 exposure area High-irradiance testing up to 180 W/m 2 (3 Sun) Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test methods Multilingual User Interface Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window glass On-rack XENOSENSIV 300-400 nm for measuring and controlling irradiance (in W/m²) and BST (C°) on sample level Selectable Temperature control either by Chamber Temperature (max. 70 °C), or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 130 °C) Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Specimen holder carousel for 11 specimen holders Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Thermoprinter XenoCal BST Black Standard Thermometer XenoCal WST White Standard Thermometer XenoCal BB 300-400 Irradiance Sensor XenoCal WB 300-800 Irradiance Sensor XenoCal NB 340 Irradiance Sensor Turning mode programmable
ROUND SOLUTIONS GMBH & CO. KG
Germany
This Product is arriving to the End of Life status. It is not recommended for new designs. Last time buy June 10th 2016. The Quad-band 850/900/1800/1900 MHZ GSM/GPRS GC864-QUAD V2 is designed for industrial applications requiring a compact footprint and board-to-board connector. The xC8ó4 family provides pin-to-pin Compatibility with its UMTS / CDMA counterpart products. This module allows a SIM holder to be mounted on the bottom side of its PCB. This option reduces the integration effort. Key Benefits Design once and deploy globally thanks to the xC864 unified form factor Premium FOTA Management - Easy firmware update by transmitting only a small delta file PYTHON Script Interpreter - customers can run their Python applications directly inside the module RUN AT Remote command and event monitoring services SIM Access Profile
Request for a quoteResults for
Remote services - Import exportNumber of results
9 ProductsCountries
Company type
Category