Results for
HYDROFLEX GROUP GMBH
Germany
2.0 ERGO 230 is a compact, touchless cleanroom cleaning trolley of the second generation with plastic buckets. The special design allows the discarding of used mops at the back and therefore ensures a higher safety against cross-contamination. The unique ERGO mop wetting unit guarantees reproducible, disinfectant-saving liquid dosing in just one step and can be adapted to different fluid requirements thanks to various mop plates. The new mop discarding mechanism ensures a touchless and safe discarding of used mops. The standard PurMop® accessories include a mop handle holder on the side and a rear waste bag holder for PurMop® waste bags. 2.0 ERGO 230 has two additional plastic buckets, which can be used to store cleaning utensils.
Request for a quoteSFS GROUP GERMANY GMBH
Germany
The TAURUS® 2/K has been designed for setting plastic rivets. In its functionality the TAURUS® 2/K is identical to the standard tool, however has a stroke of 24 mm instead of 18 mm. Plastic rivets only need a low setting force, however, normally require large setting strokes due to the toughness of the plastic material. The TAURUS® 2/K allows to safely set plastic rivets with only one setting stroke! The TAURUS® 2/K comes with 3 nose pieces for plastic rivets 17/30 K, 17/35 K and 17/40 K included. Working range Blind rivets plastic from 4 up to 6 mm Ø. Nosepieces 17/30K; 17/35K; 17/40K Technical data Strength: 24 mm Tensile strength: 8,400 N
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. Explosion-proof mixers are also feasible.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
CRP-E - Pneumatic tote tank mixer for plastic IBCs CRP-E Pneumatic tote tank mixer for plastic IBCs The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are...
Request for a quoteREA ELEKTRONIK GMBH
Germany
Fiber laser marking systems are part of the solid-state laser group. The laser beam is created in a diode-activated optical fiber. The REA JET FL is suitable for permanent the marking of metal and plastic surfaces. The marking with codes, texts, numbers or logos may even take place on oily, corroded or above 1000°C hot surfaces. Applications — engraving and annealing metals — color inscription of untreated and with additives doped plastics — day and night design — coated substrates
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HUBTEX MASCHINENBAU GMBH & CO. KG
Germany
The model MU-OP one-man order picking system is used for order picking of long loads. It is especially designed for aluminium, plastic or steel profiles and for narrow aisle operation. With this order picking truck, product can be taken out of the rack from one side of the aisle quickly & safely. The model is available as classic a Electric Multidirectional Sideloader for placing complete packs in storage, and as version with man rising cabin for picking applications with regard to individual customer orders. Operation and use: One-man operation for lightweight profiles Order picking of up to 6 m long loads Load capacity range: 1,000 to 2,500 kg Lifting height: up to 7000 mm Aisle width: Load depth or cantilever arm length plus 1230 mm (if guided: with 100 mm safety clearance per side)
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
With the METROFLOW gravimetric material loader, plastic processors can automate important areas of the production process cost-effectively and efficiently. The METROFLOW weighs every single load and evaluates the results, with a guaranteed precision of <1%. This improves the entire material management process and allows for full traceability. The material loaders come in 6, 10 and 30 liter volumes. The METROFLOW series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
GRAVICOLOR doses and mixes up to six materials precisely and with maximum recipe accuracy. These modular gravimetric units are designed for injection, blow moulding and extrusion and provide throughputs up to 2200 kg/h. Independent of recipes, materials, or the operational environment, IntelliBlend analyses all process data achieving the best possible operating point at any time through continuous self-optimisation. Recipe integrity results in excellent and consistent product quality. The GRAVICOLOR series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.
Request for a quoteResults for
Plastics design - Import exportNumber of results
9 ProductsCountries
Company type