Modules - Import export

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

Low shrinkage optical camera module adhesive with LED and/or heatcure for common substrates used in camera modules and LiDAR assemblies, in active alignment, and other optical bonding applications. Features: - Rapid LED or UV/Visible light and/or heat cure - Very low volumetric shrinkage - High Tg and Low CTE - Low ASTM E595 Outgassing - No frozen storage, refrigerated shipment/storage 15°C [3441° F]

Dymax 9801 is a LED or UV/Visible lightcurable material with superior adhesion properties for bonding camera modules, lidar, active alignment applications. The material cures with UV light but also features heatcure capability for applications where shadowed areas exist. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Moisture resistant - Thermal cycle resistant - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing

Ø32x6 mm 24.5 kN, with body 500 bar, see page B1.480

Ø32x6 mm 24.5 kN, with body 500 bar, see page B1.480

Ø32x6 mm 24.5 kN 500 bar, see page B1.480

Ø32x6 mm 24.5 kN 500 bar, see page B1.480

Advantages Optimal dimensioning due to the modular design; any flow rate; high filtration capacity; automatic cleaning; minimal pressure loss; optimal backflush effect Area of application For the filtration of matters in refinieries Flow rate Various filter sizes and the modular design enable any required flow rate. classification number F29 Filter aid - Filtration degree 25 - 50 µm Medium Diesel, oil, LCO, VGO Filter material Slotted tube Cartridges

Advantages Optimal dimensioning due to the modular design; any flow rate; high filtration capacity; automatic cleaning; minimal pressure loss; optimal backflush effect Area of application For the filtration of matters in refineries Flow rate Various filter sizes and the modular design enable any required flow rate. classification number F28 Filter aid - Filtration degree 25 - 50 µm Medium Diesel, oil, LCO, VGO Filter material Slotted tube Cartridges

Household appliances are subjected to heavy use every day. For this reason, top quality is just as important as maximum functionality and design. Products and solutions from Weber Plastics Technology distinguish themselves with their well conceived, detailed solutions.

We offer a wide range of OLED/PLED graphic modules. An OLED (Organic-Light-Emitting-Diode) is an light emitting diode whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple “printing” process. The resulting matrix of pixels (or custom segments) can emit light of different colors. As significant benefit of OLED displays over traditional liquid crystal displays is that OLEDs do not require a backlight. So the low power consumption is ideal for handheld products. In general there are basically two different technologies available. Small molecules displays often involves vacuum deposition, which makes the production process more expensive

We offer a wide range of PLED alphanumeric modules. An OLED (Organic-Light-Emitting-Diode) is an light emitting diode whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple “printing” process. The resulting matrix of pixels (or custom segments) can emit light of different colors. As significant benefit of OLED displays over traditional liquid crystal displays is that OLEDs do not require a backlight. So the low power consumption is ideal for handheld products. In general there are basically two different technologies available. Small molecules displays often involves vacuum deposition, which makes the production process more expensive

We offer a variety of Graphic-modules starting from 120 x 32 dots to 320 x 240 dots (1/4 VGA). Most of our modules operate within the wide temperature range (-20°C to +70°C). Depending on the multiplex rate we have designed several models in STN and FSTN technology. For the backlight we use LED, EL or CCFL depending on type of color, quality, lifetime and price. Different kind of technologies are possible: COB is available for most modules using backlight. COG is recommended for applications where space is limited. New technical concepts allow us to achieve wide temperature range modules without price increase. Most of our products are available from stock. If you do not find any product which can fit into your application we have the capability to manufacture customized- or semicustomized designs also at low volumes and an economical price level.

Most of our modules operate within the wide temperature range (-20°C to +70°C) without negative voltage. A contrast-voltage of ~ 4,5 Volt is required (against Vdd). The twist of 240° results in excellent contrast and improved viewing cone. We use a 16pin version PCB with optional pins for the LED-backlight (A/K). Our modules have LED-limit-resistances already on board. These resistors can be changed or bridged easily. If neccessary, the power consumption and brightness can be optimized as per customer's request. The metal bezel is set on ground. If neccessary, our PCB is prepared for disconnection. In addition to our wide range of alphanumeric modules in standard STN technology, we have recently introduced

We offer a range of 7-Segment-Modules (Digital-Modules) with integrated driver IC. Some of these products are ready for use as a full operating voltmeter. You can also use these products for different purposes as a "Multirange Measurement Instrument". Some applications for example are: voltage measurement, current measurement, resistance measurement, AC-voltage measurement, temperature measurement and more. Please refer to the technical information. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level.

For many dosing applications, it is necessary to homogeneously mix different materials of varying bulk densities and flow characteristics. The mixer module 2l is designed for mounting under a dosing unit, where it will mechanically mix, for example a powder additive with virgin material. Further possible uses: Homogenous mixing of virgin material and regrind or with masterbatch or additives. motan has 3 versions available: — Mixer module 2l-MB for MINIBLEND V — Mixer module 2l-MC for MINICOLOR V / G — Mixer module 2l-Uni for universal applications and third-party products

Telit would like to announce the EoL of the following product family: Module P/N GE864-QUAD GE864QUD Telit will follow the schedule reported below during this EoL procedure: - Build To Order term: the date of the present PCN From this date the product is available upon firm order (not cancellable and not re-schedulable). - Last Buy Order term: September 19th , 2016 Orders will only be confirmed till this date. Later orders for the affected products might be accepted upon availability on the product parts. - Last Shipment term: March 20th , 2017 Last shipping date that can be requested for scheduled orders, which were placed before the Last Buy Order Term. Please determine your remaining demand for the affected part numbers and place your last orders, your Regional Sales Director and your regional Telit Application Engineering Team will give you full commercial and technical Support and will help you to identify the best alternative product within the Telit portfolio.

The V3 variant of the GL865-DUAL is based on the latest chipset technology, designed to protect your design investments as a low-cost, long-term availability solution. It is recommended for any new cost-sensitive designs requiring 2G GSM/GPRS coverage and long term application cost stability, such as security alarms, automated meter reading, and POS terminals. The new generation GL865-DUAL V3 operates with 1.8 V GPIOs versus its predecessor's 2.8 V, minimizing power consumption and making it even more ideally suited for battery powered and wearable device applications. Embedded Python Script Interpreter in the GL865-DUAL V3 makes it possible to run the customer's application inside the module making it a complete SMT platform for m2m solutions. An optional factory mounted m2mAIR embedded SIM-chip is available.

This Product is arriving to the End of Life status. It is not recommended for new designs. Last time buy June 10th 2016. The Quad-band 850/900/1800/1900 MHZ GSM/GPRS GC864-QUAD V2 is designed for industrial applications requiring a compact footprint and board-to-board connector. The xC8ó4 family provides pin-to-pin Compatibility with its UMTS / CDMA counterpart products. This module allows a SIM holder to be mounted on the bottom side of its PCB. This option reduces the integration effort. Key Benefits Design once and deploy globally thanks to the xC864 unified form factor Premium FOTA Management - Easy firmware update by transmitting only a small delta file PYTHON Script Interpreter - customers can run their Python applications directly inside the module RUN AT Remote command and event monitoring services SIM Access Profile