Industrial die - Import export

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

We also create the programs ourselves to “breathe life” into machines and robots. After commissioning, we can run extensive performance tests. Industrial robots are the optimal solution for complex movements or systems with highest flexibility. We integrate and program the appropriate robot such as the Kuka robot and other brands.

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

The PurWipe® V3 is a newly developed presaturated microfiber nonwoven wipe, which consists purely of synthetic fibers and boasts a high absorbency combined with reduced particle emission. This wipe‘s microfibers ensure an effective cleaning performance on all types of surfaces. This in combination with the high tear and abrasion resistance make this wipe an innovative and safe solution for cleaning and disinfection in cleanrooms. Application / Usage: Recommended for effective cleaning and disinfection on various surfaces in cleanrooms. Use biocidal products safely. Always read the label and product information before use!

The PurWipe® N2 is a microfiber nonwoven wipe which consists purely of synthetic fibers and boasts a high fluid absorption combined with reduced particle emission. The pouch can be filled with your fluid of choice. The wipes are individually z-folded in a chemical resistant pouch with lid. A wide range of cleaning and disinfectant agents can be added for which today there is no presaturated wipe available. The pouch is resistant to common cleanroom bactericides, sporicides and detergents.

Manufactured from 100 % recycled and GRS-certified polyester yarn, PurMop BLACK® D3-SR is the epitome of sustainability in cleanroom cleaning. The material is made of post-consumer PET-bottles, with approximately 5 bottles being used for each cleanroom mop. Thanks to the newly developed, 100 % microfiber loops with enhanced length and high-performance inserts, D3-R boasts great fluid absorption, resulting in large area capacity. This mop combines performance and eco-friendliness like no other, bringing real sustainability and ergonomics to manual cleaning. D3-SR offers all unique features of the PurMop BLACK® mop range, such as color-coding, finger loop and integrated “Wings” technology. D3-R is developed for the use with PurMop BLACK® C1 mop system.

PurMop BLACK® C1 is a unique cleanroom mopping system, offering maximum performance and unparalleled user experience. Its telescopic handle and frame are made from carbon fiber reinforced plastic (CFRP), making it ultra light. The complete C1 system weighs only 650 g, arguably making it the most ergonomic cleanroom mop available on the market. Length adjustment can be performed using one hand only, at the push of a button either at the top or middle of the handle. A newly developed frame centring function facilitates safe overhead cleaning by preventing the frame from folding unwantedly. A further intelligent feature is the mop discarding mechanism, allowing the frame to be opened and the mop to be dropped at the simple push of a button – anywhere and without the need for a trolley. C1 is available in two color options, correlating to the color coding of the new PurMop BLACK® mops – orange for sterile models and green for non-sterile models.

The iBird® Pro is the latest tool in the GESIPA® Pro series with the new CAS battery.It can be networked with a smartphone, tablet or PC via an app! The app is available for Android and iOs devices. The iBird® Pro can be connected to three devices at the same time. With a setting force of 15,000 N and the well-proven brushless motor, the iBird® Pro is powerful and fast when setting blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shortens the pulling process, ensuring the iBird® Pro is immediately ready for operation. The iBird® Pro is extremely simple to connect thanks to the QR code located on your tool. Simply scan the QR code with the GESIPA® app and the iBird® Pro will automatically connect to your device. The optional setting process assistant from GESIPA® helps operators to adjust the setting process and evaluate riveting processes. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

Rigid stand for wall-mounting for tank volumes from 100 l. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The stand WRW is available in two standard sizes, thus enabling the processing of various tank sizes. The standard sizes are particularly designed for the processing of exchangeable vessels such as drums and IBCs.

Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg – by means of a reinforced stand loads up to 300 kg – can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

Electrical tote tank mixers for stainless steel IBCs The LRK-C series tote tank mixer and their drive units LRK-A are a special solution designed for operation on stainless steel containers with filling openings of at least 400 mm and mixing volumes from 400 l up to 1,500 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The mixing unit that remains in the container is connected to the drive unit with a bayonet coupling and a clutch. The drive is dismountable so that one drive unit can be used for several mixer units interchangeable. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The agitator shafts are borne in a bearing housing, which is welded into the container lid on the product side. The impellers are designed to fit through the filling opening DN 400 when being inserted.

The CRP-M tote tank mixers are featured with a pneumatic drive and were designed for the application in stainless steel tanks with filling openings of at least 400 mm and mixing volumes of 400 l to 1,500 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening of at least 400 mm when being inserted. All CRP-M series can be supplied as follows: Lid Muffler Explosion-protection design

The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M series mixers can be supplied as follows:

The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. Explosion-proof mixers are also feasible.

The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

With the robot wrist unit cartesian systems for the first time have the same flexibility and degrees of freedom as articulated arm robots. Only much cheaper and with much less space requirement. Moreover, IAI's unique design makes the components light and compact. Can also be used for an orthogonal axis system with interpolation function. The innovative wrist unit has two joints: The tilting joint for swivelling has a working circle of ±100⁰ while the rotary joint can be rotated around ±360⁰. The two pulse motors accelerate these cylinders at speeds of between 750 ⁰/s and 1,200 ⁰/s.

Cartesian robots can be adapted very well to the respective application conditions due to their modularity. They also take up less space than 6 axis robots, for example, because they only have the functionalities that are actually needed. IAI offers rectangular robot as 2-6 axis combinations with 230 V servo motor in hundreds of configurations as standard or precision types. An equally comprehensive portfolio of cost-effective Cartesian RoboCylinders is available. There are 396 possible combinations for them, including cable chain selection even 7056.

Main products: Copper tubes for air conditioning and refrigeration, inner grooved copper tubes, environmentally friendly copper water (gas) tubes, insulation tubes, tube fittings, plastic-coated tubes Product characteristics: High dimensional precision, high heat dissipation performance, high cleanliness, lightweight Applications: Air conditioning, refrigeration, automotive industry, construction industry, home appliances Production capacity: 150,000 tons Honorary titles: Second Prize of Science and Technology Award of China Nonferrous Metals Industry, Second Prize of Science and Technology of Zhejiang Province

Water and dust protected SCARA robots SCARA robots are also a popular option for small robotic assembly applications in harsh environments with suspended dust, moisture or water spray. IAI offers water and dust protected SCARA robots with 24 V stepper motor or 230 V servo motor. They can be used without further construction measures. The danger of leakage is not given here. One reason for the uncomplicated installation without the need for additional aggregates are their flexibility and the small footprint, which reduces the cost and time required for commissioning.

SCARA robots are often used for the fast removal and movement of workpieces, smaller assembly applications such as screwing in screws, and for the precise dosing of liquids, adhesives and sealants. IAI offers a wide range of models, from the low-cost entry model IXP to the latest IXA high-performance SCARA robot.

Suitable robots for almost every requirement What started with the first "intelligent" actuators at IAI today includes a wide range of industrial robots for all automation technology. The range includes cartesian robot systems, tabletop robots and SCARA robots. Matching controller with all common fieldbus connections complete the offer.

IAI Industrial Robots is one of the leading manufacturers of electric actuators and industrial robots. In addition to catalogue products, we also offer customised products and special developments. Actuators from IAI can be easily connected to automation applications and integrated into production lines in all industries. The controllers can be connected to the higher-level controller via digital I/Os or via fieldbus systems such as Profinet, Profibus, CC-Link, DeviceNet, EtherCat, EtherNet, Modbus and many more.

KLN Ultraschall AG offers cleaning for small and medium lot sizes without requirement to cleanliness with a max. part size of 300 x 350 mm and a max. weight of 20 kg.

motan offers a compact maintenance box for remote access via internet or company-internal intranet. The box is available as a standardised, ready-to-use system and includes a comprehensive software package for finding and analysing errors within system components as well as for monitoring and documenting system statuses. — Provides remote access to all motan CONTROLnet controls — Prevents unnecessary on-site service operations — Easy installation and compact design — Maintenance-free setup — Easy access via the Internet

Alarms of all systems connected to the motan CONTROLnet can be centrally and mobile monitored with little effort. In addition to the ALARMcollector, this only requires an internet-enabled device with one of the usual browsers. — Collects alarms and messages — Display in a central alarm list (via browser) — Sorting and filtering of alarm information — Connection of external signal devices possible — "Horn-off" function — Language selection (21 languages, incl. CN, RU, AR)