Results for
RINGFEDER POWER TRANSMISSION GMBH
Germany
The model TNZ ZCAF is composed from the coupling halves of the coupling TNZ ZCA and is complemented by an intermediate shaft and two rigid counter-flanges. If required, the torsional stiffness of the shaft can be tuned to the dynamic behavior of the drive line. In addition, the intermediate shaft, which serves to accommodate longer shaft separations, can be mounted and dismounted radially without having to move the connected machines. TNZ ZCBF: Double engagement design with a bolt-on O-ring carrier for ease of installation, and an intermediate shaft to fulfill specific requirements in terms of torsion spring stiffnesses The model TNZ ZCBF is composed from the coupling halves of the coupling TNZ ZCB and is complemented by an intermediate shaft and two rigid counter-flanges. If required, the torsional stiffness of the shaft can be tuned to the dynamic behavior of the drive line. In addition, the intermediate shaft, which serves to accommodate longer shaft separations, can be mounted and
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
Unlike the model TNZ ZCAUU, the coupling TNZ ZCA has two elongated hubs the length of which can be adapted to the plant requirements. TNZ ZCBUU: Double engagement design with a bolt-on O-ring carrier for ease of installation and two elongated universal hubs Compared to the TNZ ZCAUU, the coupling model TNZ ZCBUU is equipped with an O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved. Like the model ZCAUU, the ZCBUU has two elongated hubs the length of which can be adapted to the plant requirements.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The coupling model TNZ ZCAZ is complemented with a spacer that is mounted between the sleeves of a TNZ ZCA coupling by using fitted bolts. The spacer serves to accommodate larger distances between the shafts ends, and can be mounted and dismounted radially without having to move the connected machines. TNZ ZCBZ: Double engagement design with a bolt-on O-ring carrier for ease of installation, and a spacer to accommodate larger shaft separations Unlike the TNZ ZCAZ, the coupling model TNZ ZCBZ is equipped with a bolt-on O-ring carrier which facilitates installation by changing the mounting sequence. The coupling model TNZ ZCBZ is complemented with a spacer that is mounted between the sleeves of a TNZ ZCB coupling by using fitted bolts.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The coupling model TNZ ZCAV is suitable for vertical installation. To this purpose, the TNZ ZCA is equipped with supporting plates which hold the sleeves in their vertical position. TNZ ZCBV: Double engagement design with a bolt-on O-ring carrier and a supporting plate for vertical installation The coupling model TNZ ZCBV is suitable for vertical installation. To this purpose, the TNZ ZCB is equipped with supporting plates which hold the sleeves in their vertical position.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
Double engagement sleeve coupling with an integrated or bolt-on O-ring carrier and two elongated universal hubs The model TNZ ZCHUU consists of a one-piece housing with O-ring carriers arranged on both sides, and two elongated universal hubs. If required, the elongated hubs can be adapted to the plant requirements.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
Double engagement sleeve coupling with integrated or bolt-on O-ring seal and one elongated universal hub The model TNZ ZCHU consists of a one-piece housing with O-ring carriers arranged on both sides, and one elongated hub and one standard hub. If required, the elongated hub can be adapted to the plant requirements.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The model TNZ ZCH consists of a one-piece housing with O-ring carriers arranged on both sides, and two hubs of the TNZ ZCA coupling.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
Compared to the TNZ ZCA types, the coupling model TNZ ZCAU is equipped with an elongated hub, the length of which can be adapted to the plant requirements. TNZ ZCBU: Double engagement design with a bolt-on O-ring carrier for ease of installation and an elongated universal hub Compared to the model TNZ ZCAU, the TNZ ZCBU coupling is equipped with an O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved. Like the model ZCAU, the ZCBU has an elongated hub the length of which can be adapted to the plant requirements.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The model TNZ ZCAK is a TNZ ZCA coupling with limited end float. The limitation of the end float serves to axially locate a shaft that is mounted on sleeve bearings. The rotor of an electric motor with sleeve bearings can thus be aligned within a desired tolerance range via the coupling to the bearing of the driven machine so that the rotor remains at its magnetic centre during acceleration of the driving machine. The limitation of the end float constrains the ability to compensate for angular and radial shaft misalignments. TNZ ZCBK: Double engagement design with a bolt-on O-ring carrier and limited end float The model TNZ ZCBK is a TNZ ZCB coupling with limited end float. The limitation of the end float serves to axially locate a shaft that is mounted on sleeve bearings. The rotor of an electric motor with sleeve bearings can thus be aligned within a desired tolerance range via the coupling to the bearing of the driven machine, so that the rotor remains at its magnetic centre during
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The coupling TNZ ZCA-BT consists of two coupling halves with a brake drum mounted in between, and has longer fitted bolts than the model TNZ ZCA. TNZ ZCB-BT: Double engagement design with a bolt-on O-ring carrier and a brake drum The coupling TNZ ZCB-BT consists of two coupling halves with a brake drum mounted in between, and has longer fitted bolts than the model TNZ ZCB.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
The coupling TNZ ZCA-BS consists of two coupling halves with a brake disc mounted in between, and has longer fitted bolts than the model TNZ ZCA. TNZ ZCB-BS: Double engagement design with a bolt-on O-ring carrier and a brake disc The coupling TNZ ZCB-BS consists of two coupling halves with a brake disc mounted in between, and has longer fitted bolts than the model TNZ ZCB.
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
TNZ ZCA: Double engagement design with integrated O-ring seal The TSCHAN® TNZ ZCA coupling is a torsionally stiff gear coupling designed to have some backlash and consists of two coupling halves that are connected by fitted bolts. TNZ ZCB: Double engagement design with a bolt-on O-ring carrier for ease of installation Unlike the TNZ ZCA coupling, the TNZ ZCB comes with a bolt-on O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Combination machine for thick and thin: The AMS 533 TWIN skinning machine is particularly suited to processing cuts with thick tendonsand skin, such as pork loin, pork silverside, beef or veal silverside and boiled beef fillet. Advantages Removal of tendons and skin with one machine TWIN transport rollers and specially coordinated blades providethe highest possible yields Ideal cutting width for powerful skinning and tendon removal inlarge and small cuts Effort-saving work table design due to ergonomicmachine assembly Blade guard in cleaning position Gear brake motor with quick stop Product-specific precision adjustment Options: Quick-clamp blade holder for tool-less blade changing Body lever switch Skinning procedure protection Skinning gloves Special tension rollers
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
KRK - Coaxial agitator KRK coaxial agitator features two different impeller systems for parallel mixing. The KRK has two interdependent agitator shafts with a different number of revolutions that move in opposite directions. The faster agitator shaft is supported in the slower hallow shaft of the geared mixing unit. The KRK series is primary suitable for the dispersing of highly viscous media. The heat transfer is promoted. Explosion-proof series certified to ATEX Directive 2014/34/EU zone 0 and zone 1.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
GRP - Pneumatic agitator GRP – pneumatic agitator The GRP is a pneumatic agitator equipped with either a helical geared drive or a worm geared drive. It is used for homogenizing, dispersing, emulsifying and suspending of low- and medium viscosity materials in small containers. The agitator shaft is directly mounted on the shaft journal. Elastic operation, in other words: The speed of the agitator adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight allows an easy handling. ((Infotexte)) Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air expanding in the air engine cools the agitator drive. The pneumatic agitators are explosion proof and overload proof until standstill. Type test certificate for explosive zone 0. The GRP is a pneumatic agitator...
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
GRV - Geared agitator with variable speed gear unit The GRV series can be used in versatile manner. It is equipped with a mechanically variable speed variation drive with drive ratings of up to 11.0 kW. Furthermore it can be supplied with geared drives that have a standard output speed of between 1 and 1,750 rpm. The speed is adjustable with a hand wheel. The agitator shaft of the GRV series geared agitator is directly mounted on the shaft of the mechanical speed variator or with additional speed reduction (all before mentioned solutions possible). The agitator shafts are balanced for concentric run after assembly of the mixer. According to the specific mixing task, the GRV series can be supplied with matching mixing elements and various seals.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
GRK - Geared agitator with helical bevel geared drive The GRK series geared agitator equipped with a helical bevel geared drive with reinforced bearing can be used for a wide range of applications due to its low installation height. This ow installation height can be achieved thanks to the horizontal position of the drive. The agitator shaft of the GRK series is directly mounted in the hollow shaft of the gear and, upon request, this agitator shaft can be divided by flanged coupling. After assembly of the mixer, the agitator shafts are balanced for concentric run. The GRK series features shaft lengths of up to 6,000 mm and drive ratings of up to 75.0 kW. It has a standard output speed of 1 to 250 rpm. According to the specific mixing task, the GRK series can be supplied with matching mixing elements and various seals. Upon request, we supply the GRK series with frequency controlled drives that have drive ratings of up to 7.5 kW. Type test certificate for explosive zone 0.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEPPERT RÜHRTECHNIK GMBH
Germany
GRF – Geared agitator with parallel shaft geared drive The agitator shaft of the GRF series geared agitator is directly mounted in the hollow shaft of the parallel shaft geared drive. Thus, no additional bearing housing is necessary. The gear bearings are adequately dimensioned and fully adapted to the requirements. The GRF series is suited for a wide range of applications thanks to shaft lengths of up to 6,000 mm and drive ratings of up to 75.0 kW. It has a standard output speed of 1 to 400 rpm. The agitator shafts are balanced for concentric run after assembly of the mixer. Upon request, we supply the GRF series with frequency controlled drive that has drive ratings of up to 7.5 kW. Type test certificate for explosive zone 0.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
GRS – Geared agitator with helical geared drive The GRS geared agitator is equipped with a helical geared drive suited for a wide range of applications thanks to shaft lengths of up to 2,000 mm and drive ratings of up to 7.5 kW. The GRS series agitators have a standard output speed of 10 to 500 rpm. The shaft mounting options available include sleeve coupling, flange coupling, quick-change coupling or precision-change coupling. The agitator shafts are balanced for concentric run after assembly of the mixer. Upon request, we supply the GRS series with frequency controlled drive. Depending on the specific mixing task, the GRS can be supplied with matching mixing elements and various seals. Type test certificate for explosive zone 0.
Request for a quoteResults for
Gears - Import exportNumber of results
20 ProductsCountries
Company type
Category