Industrial electrics - Import export

Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. Typical applications are found in widely ranging sectors: — Analytics (mass spectrometry, electron microscopy) — Coating technology (surface protection, decorative films, display units, monitor screens) — Vacuum metallurgy (vacuum soldering, vacuum sintering, vacuum alloys, furnace construction) — Leak detection technology (vacuum systems, automotive tanks, airbag cartridges, packaging) — Lighting industry (light bulb manufacture) — Drying industry (vacuum drying, transformer drying)

Ronix RH-1431 Water Pump Plier is commonly used for turning and holding nuts and bolts, gripping irregularly shaped objects, holding pipes, etc. RH-1431 with its 10inch size holds all kinds of items with a larger diameter too. This high alloy steel is an ideal hand tool for all industries including automotive, electrical, HVACR and even for DIY. Using this hand tool, the chance of slipping will reduce dramatically due to its self-locking on pipes.

Well connected: installing system electronics. Today’s machines are not just mechanical. They have sophisticated electric and electronic components, information technology and data transmission systems. This is why it goes without saying for us that we take the same care when reconnecting these elements as we do with the mechanical parts and components. Electrical and electronic installations are just as much a part of our services as the subsequent I/O checks. We also have specialists in programmable logic controllers (PLC technology). Relocations are often a good opportunity to equip older systems with the latest, more efficient electronic components and operator’s stations. You can always ask our engineers any questions you might have about the control system hardware and software programming. Our carefully planned solutions for digitalizing and networking production systems support our customers on their path toward Industry 4.0. The electronics and electrics in today’s...

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing

Solvent cast film based on Acetyl-Cellulose Di-Acetate Thickness range: 30-360 µm Up to 115 µm biodegradable, compostable, certified Suitable for food contact up to 250 µm Increased water vapor permeability compared to Tri-Acetate film Special UV resistance possible Tri-Acetate Thickness range: 50-250 µm Higher temperature resistance compared to Di-Acetate film Application: Food Industry, Electrical Industry, Graphic Arts Industry, Engineering Use, Label, Lamination, Packing

Thickness range: 16-250 µm (lower thicknesses on request) High temperature resistant, biaxially oriented film made of Polyethylennaphtalate Partially heat-stabilized and / or planarized e.g.: Teonex® Application: Automotive, Electrical Industry, Graphic Arts Industry, Card, Engineering Use

Thickness range: 1,4-500 µm Biaxially oriented film made of Polyethylenterephthalate Optics: glassclear, transparent, milky, white, matt, glossy, opaque, coloured, metallisation on request e.g.: Hostaphan®, Lumirror®, Melinex®, Mylar® Application: Automotive, Electrical Industry, Graphic Arts Industry, Rubber Industry, Card, Furniture Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Label, Lamination, Packing

IAI Industrial Robots is one of the leading manufacturers of electric actuators and industrial robots. In addition to catalogue products, we also offer customised products and special developments. Actuators from IAI can be easily connected to automation applications and integrated into production lines in all industries. The controllers can be connected to the higher-level controller via digital I/Os or via fieldbus systems such as Profinet, Profibus, CC-Link, DeviceNet, EtherCat, EtherNet, Modbus and many more.

The machine of series KT can be applied universally. It is designed for the industrial part cleaning. Application fields: metal degreasing, electrical industry, optical industry, medical technology, maintenance and service etc. The compact design of the machine as 3-tank system guarantees a high cleaning quality together with space-saving location. The basic version consists of a heated ultrasonic tank (tank 1) and heated cascade rinsing (tank 2 and 3). Additionally a separate dryer corresponding to the size of the compact unit can be made available. The tanks are incorporated in a solid frame. Optionally a stainless steel base frame can be delivered. Armatures, tank and frame are made of stainless steel. All valves can be easily operated at front of the machine. All electrical operating elements are on the front of the machine. They are each assigned to the tanks.

POLIFIBRA assembled a wide range of insulating films that are based on polyester films. The polyester film usually is transparent, flexible and has a high mechanical strength. It is highly resistant to oil, grease and solvents and contains no plasticizers. Under normal operating conditions in the isolation area is polyester (Product: polyester film) aging. The electrical properties of the film are very good. Polyester film is used in practice in temperature ranges from -60 ° C to 150 ° C in many industrial applications. In the field of electrical insulation films are generally used in thicknesses 12μ to 350μ. The polyester film has excellent mechanical strength and has a high resistance to oil, grease and solvents in general good compatibility with impregnating agents on. Their electrical properties have been proven for many decades in the electrical industry. Although polyester in the thermal class B is classified, it can also allow for higher

GFK Systems PUR Systems Fire Extinguishing Agents Cleaning + Disinfection Infothek About us Contact Products Polyester Foam Resins Polyester Resins Applications Service Quality Newsletter Contact, Glass Fibre Reinforced Plastics Polyester Foam Resins Compared to conventional matrix systems for fibre-reinforced products, UP foam resins offer material and weight reductions of up to 30 % thanks to their micro-cellular foam structure. In simple sealed moulds, glass fibre reinforced plastic components that are smooth on both sides are produced cost-effectively under a vacuum in comparatively short cycle times. The production of sandwich components resistant to bending, with a foam core, and the direct integration of metal reinforcements and threaded elements – for example for large vehicle components – has also proven itself. Typical properties Dense matrix / composite of approximately 0.6–0.7 g/cm³ / 0.7–1.2 g/cm³ Fibre content 20-50% of total weight Moulded part mass per unit area of 3000–5000 g/m² Flexural modulus of elasticity 3000–8000 MPa Bending resistance of 35–185 MPa Impact resistance of 35–65 KJ/m² (with 20–35% glass content) Reinforcing materials: Continuous glass fibre mats Composite glass fibre and fleece mats Natural fibre mats Special formulations and versions Systems with long processing times for very large components Foam resin formulations with elevated dimensional stability under heat Systems for fibre-reinforced components with a high level of characteristics Coordination with gel coat / top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR1, ST2)

Surfaces with high reproduction accuracy combined with a cellular core to reduce the weight of moulded parts are among the outstanding characteristics of the rigid integral foam product group. In combination with duromer systems, our products in this field feature an extensive range of useful characteristics. Application examples include housing components and covers. Typical properties Moulded part density of 220–900 kg/m³ Shore D hardness of 35–85 Available foaming agents: usually water, but also pentane and hydrofluorocarbons Special formulations and versions Good heat insulation Self-parting formulations possible Good coating and lamination properties Flame protection formulations Electrical industry: UL 94 V0 Construction industry: DIN 4102 B2 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)

Polyester resins (UP resins) form the basis of our product range in the glass fibre reinforced plastic systems business area – with a wide variety of applications. They range from thixotrope standard systems for manual lamination and fibre spraying to low-viscosity standard formulations for polymer concrete and sanitary applications to numerous special formulations for specific requirements. With a broad spectrum of properties and applications, our UP resin systems are suitable for products in a wide variety of industries. Typical properties Dense matrix / composite of approximately 1.1 g/cm³ / 1.5–1.7 g/cm³ Fibre content 25-50 % of total weight Moulded part mass per unit area of 4500-8000 g/m² Flexural modulus of elasticity 5000–25,000 MPa (with reinforcing mesh) Bending resistance of 130–260 MPa (with reinforcing mesh) Impact resistance of 45–95 KJ/m² Reinforcing materials: Continuous or cut glass fibre mats, fleece Mesh Non-crimp fabrics Special formulations and versions Styrene-reduced, environmentally friendly formulations Low-viscosity injection resins with reduced exothermic peak Formulations for the pultrusion process Systems with high chemical and hydrolysis resistance DIN 1140 versions with special mechanical values and dimensional stability under heat greater than 100 °C (HDT > 100 °C) Resins with good adhesion for combination with PVC Resin systems with shipping industry approval: Det Norske Veritas/Lloyd’s Register of Shipping/Germanic Lloyd Coordination with gel coat/top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)