Results for
EISELE GMBH
Germany
- Seals FKM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 348 psi (-0.95 to 24 bar)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Meander Water Retention Board FKM 60 is used for multi-layered extensive green roofs.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For chemicals and acids in high concentrations and at high operating temperatures to max. 220° C. Version with good bending properties. Conforms to DIN EN 12115. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive FKM tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Meander Water Retention Board FKM 30 is used for multi-layered extensive green roofs.
Request for a quoteEISELE GMBH
Germany
- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SANHA GMBH & CO. KG
Germany
System press fittings from copper and copper alloys for copper pipes according to EN 1057 for solar and high-temperature applications for compressed air. SANHA®-Press Solar system fittings have red moulded sealing rings made from FKM.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroTherm® Industry press fittings with a red sealing ring made from FKM (Fluoro carbon) and NiroTherm® stainless steel system pipes. The system is made from the material number 1.4301 (AISI 304). NiroTherm® Industry offers installers therefore an attractive alternative to commonly used materials for closed systems that needs considerably less insulation work against corrosion. NiroTherm® Industry system press fittings are marked on the outside with a read "HT" and a red dot.
Request for a quoteSANHA GMBH & CO. KG
Germany
The premium installation system consists of high-grade NiroSan®-Industry press fittings with a red moulded sealing ring made from FKM (fluoro and perfluoro elastomers) for temperatures of up to 200 °C and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® Industry press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Industry press system and its components are certified in accordance with the rules and regulations of all important British and Continental certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The premium installation system consists of high-grade NiroSan®-Industry press fittings with a red moulded sealing ring made from FKM (fluoro and perfluoro elastomers) for temperatures of up to 200 °C and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® Industry press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Industry press system and its components are certified in accordance with the rules and regulations of all important British and Continental certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The premium installation system consists of high-grade NiroSan®-Industry press fittings with a red moulded sealing ring made from FKM (fluoro and perfluoro elastomers) for temperatures of up to 200 °C and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® Industry press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Industry press system and its components are certified in accordance with the rules and regulations of all important British and Continental certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The piping system consists of high-quality NiroSan® SF press fittings with red moulded sealing rings made of FKM and NiroSan® stainless steel system pipes according to EN 10312. Specially made for all applications that require silicone free components. Silicone-free moulded sealing rings are ideally suited to applications such as varnishing and painting industries. All NiroSan® SF press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. Certified in accordance with all relevant national and European certification bodies.
Request for a quoteResults for
Fkm - Import exportNumber of results
12 ProductsCountries
Company type