Filter service - Import export

A more economic solution for an environmentally sound condensate management is the decentralised oil-water separation directly at the source. Condensate which was processed with ÖWAMAT can be directly introduced as cleaned water into the sewerage system. The devices have a national technical approval and do not require a permit according to the law on water. In addition, the ÖWAMAT oil-water separators do not create any energy costs, boast enormous filter service lives and can be retrofitted into older systems without difficulty.

The sensors on the Flowmatic take down the original values in the flow rate of air over the entire filter chain and modify the system's performance dynamically as the process happens and hold the preset value of air volume as constant at all times. This increases the service of the filters and ensures the compliance of the air flow rates by the law prescriptions. These devices can be put to use in different applications worldwide in different industries like building restoration and cleanroom restorations. Dusts of class H can be removed and asbestos abatement is possible in accordance with the TRGS 519. The environment is taken care of as all safety and environmental standards are taken care of. These devices are portable and can purify air in different industries. For precise, adjustable volumes of air, the Flowmatic devices are the ideal solution as they make use of Monoventic control.

The HB 5010 is a hot melt adhesive tank system with gear pump, especially for manual applications. Together with the hand gun HB 910, the tank system is ideally suited for all bead or spray bonding. The construction of the simple menu navigation of the control unit is so user-friendly that the intuitive operation of the device is possible even for untrained personnel. The extremely resilient plastic housing has a dirt-resistant paint finish. The modular structure of the system increases the ease of maintenance and ensures good accessibility of the parts when servicing. A filter change is possible without additional disassembly. A conveyor system with gear pump ensures a constant volume per unit of time. The simple design of the pump makes it robust and inexpensive. The construction of the pump also enables the processing of polyamides up to 210°C. Up to 2 heatable hoses can be connected. In combination with application heads, automation of simple tasks is possible.

STAUFF Return Line Simplex Filters SRFL-SW are specially developed for direct installation into the pipeline of industrial water cycles. Depending on their size, SRFL-SW filter housings are suitable for nominal flow rates up to 13.330 l/min / 3.300 US GPM at a maximum operating pressure of 16 bar / 232 PSI. The SRFL-SW have been designed to be used in the steel industry for pre-filtering or coarse filtering in descaling plants. For use with deminerlised water we recommend the Return Line Filters SRFL-SW in Stainless Steel. The filter element construction as a Stainless Steel basket screen filter ensures a long service life. Valves (available as an option) ▪ Drain valve Clogging Indicator (available as an option) ▪ Differential pressure gauge Filter Elements ▪ Filter elements of REL series Construction ▪ Industrial filter, designed for in-line applications in water cycles ▪ Version: Simplex Operating Pressure ▪ Max. 16 bar / 232 PSI Nominal Flow Rate ▪ Max. 13330 l/min / 3521 US...

STAUFF Return Line Simplex Filters SRFL-S and Duplex Filters SRFL-D are designed for in-line hydraulic applications. With its compact construction and the easy to maintain assembly the SRFL-S and SRFL-D Filters are suitable for flow rates up to 7000 l/min / 1850 US GPM. The two housings of the Duplex Filter SRFL-D are connected with a special gate valve that is operated with a level or hand wheel. Therefore the filter may be serviced without shutting down the hydraulic system. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Differential pressure switch with visual gauge indicator Filter Elements ▪ Filter elements of RE series Construction ▪ Two versions: Simplex or Duplex ▪ With switch control for maintenance...

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

STAUFF RFB Return Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact design, the STAUFF RFB Filters are ideally suited for mobile hydraulic applications. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Air Filter Element (available as an option) ▪ Filter paper micron rating 10 µm, other filter materials and micron ratings on request Filter Bowl with Threaded Connection (available as an option) Filter...

STAUFF Return Line Filters RF are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system's oil is filtered they provide the optimum removal of contamination from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return the oil beneath the surface thus preventing the entrainment of air by the returning oil. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection ( available as an option ) Filter Bowl with Threaded Connection ( available as an option ) Filter Elements ▪ Filter elements of RE series Construction ▪ Return...

Standard advantages: RTS-Rotation – low-maintenance dry spray booth Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further. Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The ‘RTS rotation’ system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration. How the ‘RTS-Rotation’ system works Overspray separation in the RTS-Rotation system takes place by means of a pre-filter and a fine filter stage. The pre-filter stage is formed by vertical, slowly rotating brush rollers. The bristles present a very large total surface area and absorb the adhesive particles from the overspray. During the slow rotation, the paint particles can dry on the tips of the bristles. This results in slowly growing cakings on the bristles. Scrapers are mounted in the area behind the brush rollers that continuously remove these cakings from the bristles. The dislodged, hardened material falls into the drawers arranged under the brushes and can thus be simply disposed of. The dry paint dust may often be disposed of as ‘commercial waste’. The brushes otherwise require little maintenance and do not need to be exchanged or renewed. The fine filter stage is formed by a special fleece filter, which is arranged above the brush rollers and must be manually maintained or exchanged in the standard version. The maintenance intervals depend on the paint material used. Automatic cleaning or an external fine filter with automatic cleaning is also possible as an option. Over 10 years of operational experience shows that around 75 to 95% of the overspray is separated out by the pre-filter stage and the rest by the fine filter stage. The degree of separation depends strongly on the type of paint and the drying reactivity during the flying phase. Use of the RTS-Rotation with the following paints Before practical use, the paints are tested and approved in Rippert’s own pilot plant. Stove enamels and 100% UV paint systems cannot be used. The horizontal version Furthermore, it is possible to use the system as a horizontal underfloor extraction system. This version is used, for example, by a machine manufacturer for large parts. In addition, a drag conveyor with gulley extraction is used there in order to automatically transport the particles cleaned off the brushes out of the pit. Conclusion The RTS-Rotation system is particularly useful when relatively large quantities of paint with an unavoidable overspray portion have to be processed, as otherwise a great deal of residual waste would result using conventional technology. Compared to water-sprinkled spray walls and normal dry spray booths the amortisation period is shorter; it is frequently less than two years.

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 9mm, connection for 8, 10, 12, 16mm tube or ½" Filter: 50µm Dust protection cap, optional Tightness: 1x10mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

Up to 1 µm: Excellent oil purity even surpasses new oil The ultra-fine particle filtration up to NAS 1 (corresponds to ISO 4406: 13/10/7) provides the following benefits: Receives important components of the oil such as additives Absorbs up to 5 liters of water per element Keeps the oil from aging Works against contamination of the system Extends oil change intervals Ensures less failures (i.e. of servo valves) 3 sizes for different requirements C-1000-filter: Maximum service life C-750-filter: Long service life C-500-filter: Low space requirement

The system RS 6000 is a high-performing recycling system that cleans large oil volumes in several process stages. This system was constructed for many years of reliable work without service. By several process steps such as heating and settling, large amounts of water and dirt are removed. Additionally, the usage of settling technology and a pre-filter increases the service life of the main filter. The RS 6000 can be operated manually, semi- automatic, and fully automatic. It is the ideal recycling system for central treatment of, for example, cutting oil or cooling lubricants. 400 V asynchronous-motor Robust, stable gear pump Free choice of settling- and heating times and the number of filter passes Either manual, semi-automatic, or fully automatic operation Displays for operation- and process status Flow regulation for high viscosity oils Element lifter for fast filter exchange

Our mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better. 230 V-alternative 400 V motor, robust and reliable Stable gear pump Manometer for flow- and element control Pressure switch for selection setting in unattended operation 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils

Thils filter protect your system against plugging, contamination and damages. Automatically, exactly, contineously, without unplanned stagnation. This system is working as reliable as a swiss watch! .. but much more solid, because art of engineering and Bernoulli-princip. Your working cost level is comparable low, because of compact design, low pump pressure as well as minimized leakage risk. The F480 is easy to service. Our F480 filter is the first filter with Bernoulli-princip for ballast water processing. - Volume flow: up to 45.000 m³/h - Protection against blocking and fouling - Filterfineness to 40 µm - Usage from 0,7 bar working pressure - extrem low loss of pressure - compact design! - reduced piping material

• persistent filter efficiency for consistent reliabilty throughout the entire filter service life • broad range of available membranes, rates and constructions to adapt best to process specifics • from professionals for professionals • in-house laboratory for application research and product development • proven in numerous operations all over the world • optimum price-performance ratio • as a matter of course all common market designs available • quality management system: all elements manufactured under ISO 9001, ISO 14001 and OHSAS 18001 for constantly highest quality

Aero Pleat HT filters are designed as a pre filter operating at high temperatures. The filter operates up to 260° C, with lesser pressure drop and longer service life. Filters are classified with MERV7/G4/EU4 efficiency. They are made with a pleat distribution of 13 pleats per linear foot and are recommended to operate up to 3.17 m/s. These filters are available in 45mm (2”) and 95mm (4”) depths. Filter face area can be custom made in any dimensions and the maximum recommended pressure drop is 300 Pa.