Feeding unit - Import export

The AViTEQ Hopper discharge unit is used below hoppers, silos, bunkers or bulk containers for flowable bulk materials and serves as a combined closure, discharge, transportation and metering device. It is used where high material flows are required. Short hopper discharge units are mounted directly below the bulk hopper. Depending on the bulk material, the discharge unit can be fitted with appropriate protective linear and sealing systems. Advantages & benefits robust design and therefore long-lasting variable feeding speed with magnetic vibrator for optimal dosing to the process bunker closure without additional barriers arrangment central below the bunker run, simple and professional installation possible upon request, in a dust-tight design to save the environment Construction The main components are: conveyor bunker shoe for product guiding inside the feeder drive elastic support elements optional: flexible sealings optional: needle or blade gate for closing Selection The s

Utilize Weber Ultrasonics technology for your system just like your application demands it. The innovative and highly modular Saphir machine concept is a breeze to integrate in existing process lines and can be customized to individual requirements. The machine components generator, feed unit, swing unit and Touch-PC with the powerful control software SAPHIR CONTROL 4.0 and extensive accessories are pre-configured and ready for use.

The TEC 20 form, fill and seal machine enables the production of bags made of polyethylene film from a flat film roll. The film can be neutral or coloured, with continuous printing or centred printing with print mark. The design of the machine and the low loading height allow ergonomic adaptation to a manual feeding station or easy connection to a feeding unit, such as an automatic counter, an automatic weighing system, an automatic assembly machine, an injection moulding machine, a conveyor belt or similar.

ELKON Bag Cement Feeding System consists of cement feeding bunker, intermediary cement feeding screw and control panel. The operator puts the cement bag into the cement feeding hopper and tears it by means of the cutters on the hopper. Then the cement is transferred to the cement silo by cement screw. This system can be used to feed 1 unit of cement silos as well as 2 units of silo by using distribution valve.

Cement material supplied with big bags or bags can be transferred into cement silos by means of ELKON Big Bag/Bag Pneumatic Cement Feeding System. ELKON Big Bag/Bag Pneumatic Cement Feeding System consists of cement feeding hopper, intermediary feeding screw, pressure tank, compressor, loading crane and control panel. This feeding system, which has a capacity of 15 tons/hour, is equipped with 2 tons crane to lift the big bags and dispatch into the feeding hopper. The complete set of ELKON Big Bag/Bag Pneumatic Cement Feeding System fits into 1 unit 40’OT container and thus it can be easily transported to overseas countries.

The stripper-crimper AM 05 is an electropneumatic driven machine for rapid and reliable processing of loose male and female contacts. The AM 05 has a special selective feeding unit, through sensors and actuators the right placement of the contacts for further processing in the machine is guaranteed. The adjustment of the stripping- and crimping depth is motorical. Up to 50 different programs can be stored. Adjustments and programming is done with the touch Display. The touch Display Shows all important data, functions and errors. The stripper-crimper may be adapted to different contacts or wires using the corresponding tools. Options V-radius blades Z+F crimp force monitor Different crimp forms are possible in coordination with Zoller+Fröhlich Adaption for short infeed length Form blades Turning units integrable

An increase in productivity thanks to loading and unloading during the cutting process Workpiece removal during the cutting process at the collecting table possible The material feed is stretching-free Accurate placement of the workpiece through automatic edge control with the Feeding Unit Optional camera recognition system for automated processing Optional marking systems (e. g. Ink Marker) Processing of very large formats by edgeless continuation of cuts possible.

The high-performance automatic circular saws of the HCS-E series are specialists for highest cutting performance and premium quality, which quickly pay for themselves in multi-shift operation. The basis of the extreme performance is the unique, extremely stable and solid construction with perfectly matched components and state-of-the-art drive technology. The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. And what is remarkable: This system concept covers a large range of all industrial requirements, providing the highest quality at an unbeatable priceperformance ratio.

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting

The automatic mitre bandsaws from BEHRINGER are saws to really get things moving. Particularly when it comes to classical series production such as cutting to fixed lengths and mitre sawing in automatic mode. And also when cutting layers and packages they make a good impression. By their excellent cutting performance and short nonproductive times, your productivity can be increased significantly. Using an NC controlled feed gripper in conjunction with an NC controlled saw frame mitre box, fully automatic mitre cuts can be performed on both sides. The PC control system provided as standard makes for extremely simple menu-prompted operation of the saw and peripheral devices. The BEHRINGER mitre bandsaws contain many useful features already in the basic price: - Convenient PC control - Fast NC-controlled mitre system - Vertical clamping unit - NC-controlled feeding gripper with 3.000 mm feeding length in single stroke - Spray mist cooling system

With the ECKOLD insertion system, nuts, studs and bolts can be pressed into almost any material, especially in the automated production. The servo motor-driven system can be configurated for stationary or robot-guided use. This offer includes: Servo motor-driven insertion system • Insertion frame, throat of approx. 700 mm Stroke 150 mm Press force max. 58 kN Positioning accuracy +/- 0.02 mm Stroke speed max. 150 mm/s • Servo motor-driven • Feeding unit • Separator • Frame • Control cabinet incl. visualisation software ECKOLD VISU • Tool holders Tools are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer!

You require a mobile steam plant or you want to install a steam plant outside your plant building? Then the complete installation within a container is the ideal solution for you. The container steam plant contains all the required components – from the water treatment plant through to the steam trap. - CERTUSS steam generator - CERTUSS CVE supply unit - Feed water treatment - Steam distributor - Pressure reducer station - Clarification valve - Steam dryer - Condensate elevating system - Steam trap - Interior lighting of the container - Insulated pipe installation in the container - Emergency-off switch - Steel door or uPVC door - High-quality stainless steel wall with insulation - Outside coating as required The installation and commissioning of the container plant at the customer is on request either carried out completely or only partially (if an external installation company is used) by our customer service.

DESCRIPTION High stability on high capacity. Can handle multiple bottles size, types and shapes Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION tow caps feeding units One rotary star filling, capping and closing system HMI and SCADA system with touch screen integrated user friendly and simplified software. Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification. 2 peristaltic pumps. 2 heads Diving filling nozzles Capping system. One side labeling machine.

Application The VD4HD/-30° can be used for refacing the external conical landing face on valve cages. Capacity Max. refacing diameter 250mm Angle of transverse feed -30° Features Drive unit and gear head of the VD4HD/-30° are identical with the drive unit and gear head of the VD4E Valve Seat Refacing Machine. If a VD4HD is already on hand, only the D4/-30° adapter head is required for refacing the external conical landing face on valve cages. The D4/-30° adapter head is bolted to the gear head in place of the seat refacing adapter head. The pilot used for valve seat refacing can be also used for centering the VD4HD/-30°.

SOMOS® RDM mobile dryers are designed for drying highly flowable, hygroscopic polymer pellets and regrind. They can be used flexibly as auxiliary units for supplying processing machines for moderate throughputs which is a particular advantage for frequent material changes. The mobile dryers, with their attractive, functional design, consist of a dry air generator and an insulated stainless steel drying bin. They are optionally available with an integral dry air conveying unit for automatically feeding the processing machine. The dry air generator uses the SOMOS® single chamber system making highly efficient use of desiccant. As a result, the desiccant can be regenerated quickly and energy-efficiently, providing cost benefits for the processor. Having five graduated sizes of drying bin with an effective volume of 30 l to 400 l, the dryers are capable of flexibly pre-processing a volume of material suited to the processing machine's throughput right by the machine.

Carrousel machines, optimised for high performance, fulfil all needs for large quantities of units. According to performance, the machine will be produced with one or two carriers. Versions as a transfer machine with automatic body feeding, integrated trimming unit or labelling station guarantee the highest levels of productivity.

INDIVIDUAL SOLUTIONSIf you are searching for a custom solution for your mass finishing processes, the TT...B series is the best choice. The modular system allows you to fit the individual machines with feeders, screening machines and abrasive media return transport systems as required. ELECTROMECHANICAL OR HYDRAULIC SYSTEMS AVAILABLE The work bowl can be pivoted either electromechanically (TT 25, TT 45) or hydraulically. You can also partially automate processing with the respective peripheral devices such as feeding and separating units. THE BENEFITS AT A GLANCE Individual mass finishing solution Modular system Choose from electromechanical or hydraulic system Partial automation possible

Our agricultural stretch films (Blown Stretch Films) are PIB-based blown stretch films. Due to the special blown-film extrusion process they provide an even greater protection than cast stretch films. In agriculture, they predominately serve for the production of so-called silage bales which reliably protect the feed in small consumption units against weather and moisture for a long time and thus ensure that the feed retains its high quality. With their excellent adhesive characteristics our agricultural stretch film optimally seals the bale against the outside. The film has a thickness of 25µm and is available in the colours white, black, light green and dark green in the dimensions 750 x 1500 m² or 500 x 1800 m².

Our agricultural stretch films (Blown Stretch Films) are PIB-based blown stretch films. Due to the special blown-film extrusion process they provide an even greater protection than cast stretch films. In agriculture, they predominately serve for the production of so-called silage bales which reliably protect the feed in small consumption units against weather and moisture for a long time and thus ensure that the feed retains its high quality. With their excellent adhesive characteristics our agricultural stretch film optimally seals the bale against the outside. The film has a thickness of 25µm and is available in the colours white, black, light green and dark green in the dimensions 750 x 1500 m² or 500 x 1800 m².

The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses from 2-190mm. The machines generate a very good chamfering quality thanks to the optimized interaction between the cutter head, cutting inserts and minimal quantities of lubrication. In NE metals and steel, a chamfer width up to 30mm is possible. The MMB machines have gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can be set gradually in the range of 30° depending on the machine type and design, for example, 25-55°, 30°-60° or 35-65°. The MMB series is equipped with a feed unit by default. The machines can be extended with roller guide ways or converted into automatic chamfering machines. Depending on the design, the machine table is equipped with ball or heavy-duty rollers.

The sturdy and easy-to-use chamfering machine was designed for the deburring and chamfering of small to medium-sized workpieces and bar material starting with a thickness of 1 mm. The machine generates a very good chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts. In NE metals and steel, a chamfer width up to 11mm is possible. The WKF 170 has gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can cover a range from 15-60° in 5° steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box. The machine can be extended with roller guide ways or converted into an automatic chamfering machine.

The KSM 125 and KSM 130 edge grinding machines are designed for deburring and edge cutting of small to big workpieces starting with a thickness of 2 mm. The chamfer is scrubbed and finished in one step with our two-zone grinding disc. The chamfer setting is made by opening / closing the prism. This is used effectively and efficiently through the axial adjustable corundum grinding disc. The KSM 125 has an integrated extraction socket for connection to an extraction system. A water cooler is installed in the KSM 130. The machines are equipped with hardened and polished guide rails. Hardened workpieces and HSS materials can be processed p to 5mmx45° in multiple steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machines can be installed on an undercarriage for flexible use in a workshop.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 1 mm thickness. The machine generates a perfect chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts - like sanded. In NE metals and steel, a chamfer width up to 10mm is possible. The ASO160-M is ideal for processing steel and aluminum. The ASO 160-MSL design has speed regulation that is very useful for the processing of aluminum or stainless steel. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 5 mm thickness. The hardened and sanded guide rails must be turned for smaller and thinner workpieces starting with a thickness of 2 mm. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clean and constant chamfering. A chamfer width of up to 12 mm is possible in NE metals and a chamfer width of up to 10mm in steel. The cutting edge length of the cutting inserts can be used 100% thanks to the innovative axially adjustable motor shaft. The ASO 650-WSL has speed regulation that is very useful when processing aluminum or stainless steel and a gradual angle adjustment in a range from 15-45°. A radius processing from R1.2 to R6 is possible with different cutting inserts. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. A chamfer width of up to 10 mm is possible in NE metals and a chamfer width of up to 5mm in steel. Hardened workpieces, HSS and hard metal materials can be processed through optional CBN and diamond grinding discs. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop.