Fasteners - Import export

Features • TOX patent: Processing possible without pre-drilling or special tools • Effectively prevents thermal bridges • No pressure load on the facade • Fast processing and immediately loadable • Reinforced wall plug neck prevents possible twisting off • 100% nylon Description & Area of Application • Insulation wall plug with coarse, conical thread and flat head drive TX40 • Holder for chipboard screw Ø 4.5 - 5.0 mm • Wide range of lengths

Features • Just knock in: simple and fast • For wood components • Impact lock prevents premature spreading • Buttress thread • Fast and economical push-through installation • Nail screw can be easily screwed in and out as required Description & Area of Application • 2-way split spreader element with impact lock • Countersunk head • Pre-assembled, galvanized nail screw with buttress thread • Countersunk head and PZ drive

Features • Without pre-drilling in gypsum plasterboard • Screw in directly • No special tool required • In gypsum fibreboards high holding values up to 20 kg per fixing point • Also suitable for M4 screws Description & Area of Application • Metal wall plug (zinc die-cast) with drill tip and pronounced external thread • Also suitable for double-layer gypsum plasterboard • PH2 driver for easy installation • Spiral Plus + Screw: Screw with PH2 driver

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

Special quick release fastenings for body parts and covers

The trend – particularly in the automotive industry – is towards lightweight materials. Aluminium and magnesium alloys are in increasing use in many fields of technology. So fastening technology needs to adapt too. Aluminium offers countless options because the material is so versatile for cold forming. Under the Alufast® name ARNOLD UMFORMTECHNIK has brought together screw fasteners and form parts made from aluminium. Our many years of experience working with aluminium, including extensive research are your guarantee of optimum fastening results. We are constantly optimising our processes, ensuring that our Alufast® products are always at the latest state of technology.

Considerable reductions in time and money can be made by using LocTec® lock fasteners to create lock fastenings. The screw is simply screwed in using the special locking bit - job done. There's no need for any further locking measure - such as driving in steel balls, or using breakaway elements. The special flank geometry on the screw drive allows the screw only to penetrate inwards. Any attempt to drive it out, even using the locking bit that was used to fit it, will result in the fitting tool being automatically driven out. It means that the fastening can be undone only by mechanically adapting the screw head.

Time and again, our systematic research and development work results in multi-functional fasteners that, because of their shape, are able to combine two or more functions. Some examples of multi-functional combinations: joining and sealing and decoupling joining and bearing and drive with articulated joint receptacle with shear-off element

The requirements of modern screwdriving systems are becoming increasingly complex. Besides achieving the best possible seat for the tool, the most important criteria for driving tools are service life and torsional stability. The TORX PLUS® provides enormous advantages. TORX PLUS® provides these advantages, due to the following design characteristics: The actual working angle is 0° Larger cross-section on cam faces Lower chamfering on application of force Where TORX PLUS® drivers are used the head height can be minimised, thus reducing the overall weight of the component. This is made possible with the improved force application process, which ensures decreased penetration depth.

Toothing is a frequent design element. They are complex in geometry, and their manufacture requires heavy machine use. Previously, toothed parts were mainly manufactured in a cutting process with a finishing process that followed the heat treatment stage. But we produce toothed parts in a cold-form process, thus providing the following benefits: customer-specific external geometries greater endurance strength greater mechanical load resistance press-smooth surfaces high accuracy of shape and position saving on materials

Lightweight structures in the automobile industry demand savings in materials and weight, while using materials and components with high load capacities. Plastic-moulded bushes take account of this development. They reinforce the plastic, make weak points for load-bearing functional elements and receive the pre-load forces of screw fastenings. The use of aluminium bushes saves even more weight, providing sophisticated solutions when combined with TAPTITE 2000® thread-rolling screws. Conform® bushes indicate high accuracy in length and diameter.

Every day, industries throughout the world encounter assembly problems caused by cross-threading. Cross-threading occurs when the screw is misaligned into the female thread. This creates a new thread, which destroys the female thread. Now Arnold UMFORMTECHNIK is able to supply the patented MAThread® dog-point, an innovative solution to this problem. Screws with MAThread® dog points are shorter, lighter and can be used in more applications than other special fasteners. They are easy to fit, and robust, and thus eliminate every problem that commonly occurs with regard to fitting threaded fasteners. The MAThread design allows the designer to select the point shape best-suited to feed well in the application. As the threads come into contact, the patented anti-cross thread MAThread design begins to cam over the female thread. The MAThread design now forces the two thread helixes to align every time without fail.

With Conform® components our customers can reduce their procurement and assembly costs: We handle the preceding processes thus enabling slimmer procedures at our customers’ own production facilities. So that we can meet the wide variety of component needs for our customers, we work within a network of certified partners. Some examples of components made to customer specifications: cold-formed parts in steel cold-formed parts in aluminium rubber decoupling elements plastic injection-mouldings stampings metal bending parts non-detachable washers or sealing rings

Base surfaces Standard surfaces can be applied at our in-house electro-plating unit. We also make use of a network of outstanding industry partners able to apply the best surface for every application. Zinc-galvanised with various passivations (CrVI-free) Zinc-nickel-galvanised with various passivations (CrVI-free) Zinc flake coatings for various standard product families Phosphate coatings Further base surfaces on request Topcoats ARNOLD UMFORMTECHNIK GmbH & Co. supplies various organic and inorganic topcoats, seals and low-friction coatings. The appropriate products for the galvanised surfaces or zinc flake coatings can be selected from very many options in the range. Low-friction coatings Seals Seals with integral lubricant Organic and inorganic coatings (different colours on request) The low-friction coatings meet the VDA 235-104 friction coefficient requirements – total µ of 0.09 to 0.14. Further friction value ranges can be adapted on request.

As a general rule, aluminium inserts are mainly used for joining plastics. They are used to stiffen components (tube supports) or as the counterpart to a direct fastening. With the appropriate choice of geometry and alloy they obtain outstanding fastening results. The benefits of aluminium inserts as metal-metal fastenings become evident, particularly for components that are subject to vibration stress or where operating temperatures are high. lightweight flexible durable stable environmentally friendly corrosion resistant The benefits of a trilobular cross-section approx. 35 % greater torsional torques compared with round-knurled inserts greater vibration resistance permits greater core hole tolerances when press-fitting

TriPress® is a triangular rapid fastening system that can be clinched into plastic and light metals. During the clinching operation, the two components of the TriPress® fastener connect together quickly and economically. It is available in the following designs: Triangular shank and knurl parallel with axis provide greater torsional strength. Circumferential locking flutes on triangular shaft generate high pull-out resistance. Combination of grooves and knurls permit positive-fit fastenings and achieve high torsional torques and pull-out forces (figure 4). So the fastener can be clinched into pre-prepared holes or injected as inserts into plastic housings.

By using REMFORM® screws to join synthetic materials, the cost of the inserts and the associated work step can be omitted in the injection process. The screw simply screws into an existing core hole, forming its own thread as it goes in. The asymmetric thread geometry of the REMFORM® screw ensures that the synthetic material flows towards the load flank as the thread is formed. Thus: low turning torques high vibration resistance low cracking risk high assembly reliability Additionally: The radial force offset to the radius enables a much higher tightening torque simultaneous with a smaller tube geometry. Result: much higher clamping force. Your commercial benefits: The overall cost of fastenings is reduced by up to 72%.

A non-detachable fastening for sheet metals can be produced at optimum cost by using self-clinching screws under the brand names of RIVTEX® (for sheet thicknesses between 0.75 and 2.00 mm) and STRUX® (for sheet thicknesses between 2.0 and 5.00 mm). The clinching technology is suitable for steel and aluminium sheets, causes very little cost in inspection and control, and allows several clinch screws to be processed in a single stroke.

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

Various product ranges to assemble and fasten easily panels

Features • Quick processing with mounting pliers (can also be mounted without) • For shallow cavity depths • Wall plug cap with anti-rotation lock prevents rotation in the building material • Suitable for single and double layer wall panels Description & Area of Application • Galvanised metal cavity wall plug with wall plug cap, rotation locks and metric screw with hexagonal (SW13) or crosshead driver • When the wall plug is put in place, the expansion segments are widespread on the rear of the panel • Fire resistant to DIN 4102 (class A1)

nickel plated steel

Features • All-purpose for almost all building materials • Approved by the building authorities • Also approved for the fastening of ceiling substructures • 70 mm anchoring depth for secure hold in perforated brick • Fire resistance class R90 (in concrete) • Optimised spreading geometry • Can be processed down to -20°C • Also suitable for natural stone with dense structure • Countersunk screw with internal driver TX40 for flush installations Description & Area of Application • 2-way split spreader element with rotation lock • For fastening facade and roof substructures, doors, windows, etc. • The Fassad is supplied as a fastening kit with screw

SPIROL is a technical resource that provides high quality components that improve the quality of your assembly, extend the life of your products and reduce your manufacturing costs. We are the leading global manufacturer of engineered fasteners, shims, installation machines, and parts feeding equipment producing over two billion components annually. In addition to high quality products, SPIROL has Application Engineers throughout the world to assist you in your designs, supported by state-of-the-art manufacturing centers and global stocking facilities to simplify the logistics of delivering your product. If you have any questions or would like complimentary Application Engineering support, please feel free to contact us at any time!

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Features • Continuous installation without readjustments of the screw • Rapid and convenient installation of the Acrobat • Short construction for narrow spaces • Comfortable handle for pleasant and safe working Description & Area of Application • For fastening the Acrobat • Metal mounting pliers, with head and two handles with slip protection • Enlarged screw holder for all sizes M4 to M8

These are the optical fiber fastener which accessories used in electronic. They were made by brass, optical fiber fasteners are essential components in the field of fiber optics. Optical fiber fasteners play a crucial role in managing and securing fiber optic cables. They are designed with specific features to ensure the safety and integrity of the cables, making them an indispensable tool in the field of fiber optics.

PRODUCTION CAPABILITIES KEBA Fastenings’ processing capacity for Turned-Parts comprised of steel, brass, aluminum, and stainless steel bars ranges between Ø 1mm to Ø 60mm via CNC Auto Lathe, Index, and Sliding Automat machinery. The manufacturing technology and team capabilities allow for custom made parts according to customer-specific drawings. SURFACE TREATMENT • Browning • Anodised • KTL • Zinc - Lamella • Galvanized (blue, yellow, black) • Zinc - Iron • Zinc - Nickle Powder • Phosphating • Chrome • Copper

K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading