Extensions - Import export

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

This thermocouple extension can be used for any thermocouple with type “K” mini plugs. Selecting these high-grade components achieves long service lives.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

extensions, adjustable, including VA-collar and bore

Extensions for service and gate valves. Modular extension system with protective tube

Fork extensions are the ideal solution where loads need to be transported that are longer than the fork prongs. Please note The extension must be supported by at least 60% of the existing fork prong. The carrying capacity of the fork extension is dependent on the particular fork. Please pay attention to the carrying capacity and centre of gravity of the forklift truck.

Standard design; open at bottom The SZGVO is an ideal extension that is very light. As with all forkprotection products, the SZGVO can be outfitted with a secutex buffer pad. The thickness and width of the fork extension are based on prong width, prong thickness and carrying capacity.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

Ronix uses the best and highest-quality raw material in manufacturing hand tools. these extension bars are made of superior chrome-vanadium material to increase torque and unique hardness. This high-strength chrome vanadium steel extensions provide high torque for greater turning power. This extension bars are equipped with 3-layer chrome coating which protect the tool from corrosion and rusting. these extension bars are designed remain locked onto the drive until you push the quick-release disengage button.

Ronix uses the best and highest-quality raw material in manufacturing hand tools. these extension bars are made of superior chrome-vanadium material to increase torque and unique hardness. This high-strength chrome vanadium steel extensions provide high torque for greater turning power. This extension bars are equipped with 3-layer chrome coating which protect the tool from corrosion and rusting. these extension bars are designed remain locked onto the drive until you push the quick-release disengage button.

Technical Data Mat EN 10270-3-1.4310 - type of material Oefo 1/1 deutsche - loop shape Oest 180 degree loop position Oesttol 25 degree (+/-) tolerance of loop position d 0.2 mm Wire diameter D mm mean coil diameter De 2.7 mm outer coil diameter Detol 0.15 mm (+/-) tolerance of outer coil diameter Dh 3.2 mm minimum bush diameter F0 0.061 N initial tension Fn 1.101 N Maximum spring force Fntol 0.13 N (+/-) tolerance of maximum spring force Lk 2.5 mm length of unstressed spring body L0 6.2 mm length of unstressed spring, measured from inner edge of loop to inner edge of loop L0tol 0.6 mm

Extension springs in 4280 spring sizes for fast delivery from stock made of normal steel EN 10270-1 and stainless steel EN 10270-3-1.4310 from Gutekunst. The extension springs are made of round spring steel wire in a cylindrical shape with a 1/1 German eyelet on each side and a linear spring characteristic in quality grade 2 (medium tolerance range) according to DIN EN 15800. Simply select the right tension spring on www.Federnshop.com and order it directly from Gutekunst via the shopping cart. In addition to its catalog program, Gutekunst produces individual extension springs according to customer specifications in any desired size, design and eyelet shape from 0.2 to 12.0 mm wire diameter from all common types of spring steel in small quantities and large series. In addition to the classic cylindrical extension spring designs with a linear spring characteristic, Gutekunst also produces conical or barrel-shaped tension springs individually as required.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Drawer cabinet with 9 drawers 9x 100 mm drawers with full extension 100% - load capacity 50 kg WxDxH 980x500x1019 mm

Drawer cabinet with 9 drawers 9x 100 mm drawers with full extension 100% - load capacity 50 kg WxDxH 680x500x1019 mm

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The compactness of the closed system makes it ideal for environments without much space between the machine and the ceiling. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The wall-mounted system feeds the machine and retracts, facilitating the feeding of machine tools where obstructions to protective doors must be avoided. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Category Compressed-air technology / Fittings for air hoses / Valve extensions Product number supplier 301971

The MBS hydraulic cylinder MZR-1008 is designed as a discharge cylinder of direct support systems on mobile devices, such as Cranes have been constructed. The integrated position measuring system enables the exact position of the support cylinder to be detected. This is hydraulically fixed in connection with the piped double check valve. The cylinder connection is via plain bearing bushes. There are connecting bores for pipe fittings according to BSPP ISO1179-2 in the valve block. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for...

The spindle extension SamSpindle, has been specially designed for the extension of lathe spindles. Together with the bar feeder Multi 3000 it forms a safe, clean and efficient solution. The SamSpindle operates oil and air free. There is no mechanical connection to the lathe. Only a minimum of moving parts and masses. These are: the rotating bar, the guide rings and the inner cage of the ball bearings. The guide rings mounted in the roller bearings keep the bars in the centre of the SamSpindle cartridge. Thanks to this technique, round or test bars can be rotated at high speed, ensuring remarkably smooth running. You can turn drawn, round or profile bars, with correct straightness, at the maximum spindle speed of the lathe. This allows us to guarantee workpieces with high precision. The SamSpindle spindle extension offers maximum safety. It does not allow access to parts in motion. The moving parts are all enclosed in the SamSpindle cartridge, which is closed by a safety nut.

cable coupling enlargement Category Electrical equippment for vehicles / Cable connections / Cable connections extension Product number supplier 777909

cable coupling enlargement Category Electrical equippment for vehicles / Cable connections / Cable connections extension Product number supplier 777909

Special eye forms for extension springs: There is an increasing number of potential applications for trumpet-end springs and mounting aids for extension springs – a solution that we have been addressing for many years now. We produce our range of extension springs with German and British standard eyes with wire diameters of 0.25 mm to 4.00 mm. We can also produce special-purpose eyes and other eye forms as needed according to alternative specifications with wire diameters of 0.20 to 4.00 mm.

ideal for producing an air curtain or for drying extensive areas high blowing power at significantly reduced noise development flexible in user applications

Optigrun Intensive/Extensive Single Layer Substrate Optilith is used as a drainage and vegetation substrate on intensive and extensive single-layered green roofs; used for accumulation of excess water in a cistern with enhanced water purity requirements.

Optigrun Extensive Multi Layer Substrate E-light is used as a vegetation substrate for extensive multi-layered green roofs, on roofs with low load capacity; suitable for a broad plant species diversity.

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

stainless steel*internal thread M 10*Ø 12 mm