Results for
BORSIG GMBH
Germany
BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.
Request for a quoteBORSIG GMBH
Germany
BORSIG patented steam superheaters are suitable for steam pressures of up to 160 bar (16,000 kPa). The steam superheaters are arranged direct in line after the waste heat boilers which are connected to the secondary reformer or reformer – depending on the process. The steam superheater can be provided as two stage or one stage, horizontally or vertically arranged. The final design arrangement is determined by the process requirements. We have delivered steam superheaters for superheating saturated steam at a pressure stage of 12,500 kPa from 328 °C to 531 °C by cooling down process gas from 723 °C to 355 °C.
Request for a quoteBORSIG GMBH
Germany
BORSIG manufactures reformed gas waste heat boilers for more than 50 years. We supply reformed gas waste heat boilers for gas inlet temperatures of up to 1,200°C and steam pressures of up to 160 bar (16,000 kPa) for petrochemical industry (ammonia plants, methanol plants, hydrogen plants, ethylene plants, styrene plants, MTBE plants, oxo-alcohol plants, direct reduction iron plants, coas gasification plants, gas to liquid plants, and others. Every reformed gas waste heat boiler is designed and manufactured exactly in accordance with the customer´s individual requirements. BORSIG offers two different designs: 1. Reformed gas waste heat boilers with BORSIG´s thin stiffened tube sheet design 2. Reformed gas waste heat boilers with thin flexible tube sheet design.
Request for a quotePFLITSCH GMBH & CO. KG
Germany
The LevelEx is available in sizes M16 to M63 or with NPT threads from 3/8" to 2 1/2". PFLITSCH manufactures the cable gland bodies from bright brass, galvanised nickel-plated brass and corrosion-free stainless steel. The LevelEx achieves protection class IP 66 or IP 68 and corresponds to the ignition protection types flameproof enclosure "Ex-d" and increased safety "Ex-e". With its wide temperature range of -60 °C to +130 °C and approvals according to ATEX and IECEx, the LevelEx can also be used under extreme environmental conditions. For armoured cables, PFLITSCH offers the LevelEX AC. It has the same technical quality as the proven LevelEx for non-armoured cables. In addition, it convinces with additional properties. For example, it scores with an innovative design for accommodating armoured cables: Two opposing windows in the armour clamping allow the correct seating of the cable armour to be checked immediately.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KITO ARMATUREN GMBH
Germany
For installation into pipes to protect containers and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Working unidirectional in pipes, whereby an operating pressure of 1.2 bar abs. and an maximum operating temperature of 60 °C must not be exceeded. Provided with one temperature sensor (PT 100) the armature is certified against short time burning from one side. The installation is not dependent on the position and both directions of flow are possible. During installation, please observe the direction of detonation and the indication „protected side“.
Request for a quoteKITO ARMATUREN GMBH
Germany
For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. All sizes are tested against “stabilized burning” and withstand this up to a max. burn time BT ≤ 30.0 min. To detect a “stabilized burning” a temperature sensor must be installed at each endangered side. Mounting is acceptable in any position, in horizontal as well as in vertical pipes.
Request for a quoteKURT MAIER MOTOR-PRESS GMBH
Germany
With the FPM (once F&G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency High Voltage Motors high voltage motors in flameproof enclosures which provide reliable drive power in industrial plants and equipment in the chemical, petrochemical and offshore industries. The extreme operating conditions which prevail in these areas demand the highest levels of operational safety and reliability. This motor is particularly low in noise and is equipped with built-in temperature sensors for monitoring the bearings. An additional terminal box for PT 100, anti-condensation heaters, etc. is also provided Performance range 160 - 800 kW Ex-proof II 2 G Ex de IIC T4
Request for a quoteAAAGILER GMBH
Germany
Offering international, multidisciplinary team for efficient project purchasing and special procurements in Germany / the DACH region The importance of a strong procurement department is critical to successfully completing projects. DEDE Industrieausstattung recognises that adding international engineers to the team is key to successful procurement of materials and services. The team not only has broad, international expertise, but also a deep understanding of industry requirements. The engineers are not only able to minimise risks, but also proactively take measures to mitigate them. This helps to complete projects on time and on budget. DEDE Industrial Equipment also specializes in sourcing specialist products and solutions and can identify qualified niche manufacturers. Customers can benefit from this expansion and rely on the expertise and commitment of the multidisciplinary team. Clients can rely on us to meet their quality, schedule and budget requirements.
Request for a quoteBÜRKLE GMBH
Germany
The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.
Request for a quoteSTAIGER
Germany
• Light emitting seals (Flat seal with integrated circuit, LED and transient voltage suppression); • Light emitting sockets (LED, with integrated seal and screw, transient voltage protection); These light-emitting Staiger seals and sockets are above all suited for assuring operational readiness of new and existing installations The light-emitting seals and sockets immediately signalize malfunctions and their precise location. This is particularly advantageous in valve cascades or similar systems with high packing density. Your system’s operational readiness is considerably improved by using the electronic components fitted with LEDs. This is an effective measure to consistently reduce required maintenance costs and time. Owing to their low height and standardized connections, the light-emitting seals and sockets may also be installed in retrofitting.
Request for a quoteSOLARSPRING GMBH MEMBRANE SOLUTIONS
Germany
"The MBS-Outdoor from SolarSpring is a compact and innovative water treatment plant.The system guarantees a reliable and safe water supply from contaminated and microbiologically contaminated water sources without the use of Chemicals. Tecnical data: Nominal flow rate: 50-200l/h Energy consumption: 40W Weight: 22kg"
Request for a quoteResults for
Equipment for the petrochemical industry - Import exportNumber of results
13 ProductsCountries
Company type
Category