Results for
IGUS® GMBH
Germany
Universal glide elements – customise your own plain bearing supported rotary table systems Using the versatile iglidur® PRT universal glide elements, large slewing ring systems can be modeled tailored to the type 01. Depending on the number of elements, rotary table systems can be implemented with inner diameters ranging from approx. 0.5 to 5m. – we will gladly support you with the design and detailed layout. Universal gliding element, made from the proven iglidur® J Customize your own slewing ring tables starting at 500 mm diameters and larger Lubricant free Maintenance-free wear-resistant Rugged Resistant to corrosion Typical applications:Solar industry, assembly equipment, fixture making 1. Glide element made of iglidur® J Part number: JRS-500S/45S Material table General features Density 1,49 g/cm 3 Colour yellow Max. moisture absorption at 23 °C and 50 %r.h. 0,3 Wt.-% Max. water absorption 1,3 Wt.-% Mechanical properties Max. permissible static surface pressure (+20 °C) 35 MPa Shore D hardness 74 Physical and thermal properties Max. long term application temperature 90°C Max. short term application temperature 120°C Lower application temperature –50° Electrical properties Surface resistance >10 12 Ω loads up tp 10 tons
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4) a special drive control is available as synchronous version. Max. travel. 498 mm Max. compressive force. 3000 N Max. tensile force. 1000 N Max. travel speed 8 / 16 mm/s Protection rating IP 20
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately. They are therefore important interfaces between the mechanical and electronic parts of a machine. Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor. Typical applications include —Machine tools —Wood and plastic machining —Textile machines —Lifts —Door systems —Paper machines —Drive equipment —Assembly and handling equipment —Packaging machines —Scales —Test machines —Conveying equipment —Doors and gates Specific characteristics —Degree of protection IP65, all-around —Robust —High resistance to interference —Rotary speed sensor: 60 pulses/turn (standard) —Angular displacement sensor: up to 3600 pulses/turn —Detection of rotation direction (channels A and B) —Reference pulse (channel N) —Special versions on request
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. Typical applications include: —Testing the strength of welded joints —Sports medicine —Monitoring the clamping force of hose connections The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Lifting column Multilift II ESD – discharging voltages via the lifting column In the electronics and semiconductor manufacturing industry, electrostatic discharges can impair the function of components being assembled, or even destroy them. Special ESD assembly workstations are equipped with an antistatic finishing that prevents this from occurring. Until now, lifting columns for the height adjustment of workstations have prevented the safe dissipation of electrostatic discharges by interrupting the electric connection between the table and the foot frame. However, with the Multilift II ESD, RK Rose+Krieger has developed a patented electric height adjustment system that is able to dissipate voltages. This has been realised thanks to the design of the outer and inner profiles which are continuously in contact with one another.
Request for a quoteDIETZ GMBH
Germany
To ensure safe transport and enable an easy handover of the products during later industrial processes and assembly, we ship our springs and sub-assemblies in special packaging. Any conceivable special packaging is adapted precisely to the product in question, e.g. blister or polyethylene packaging. Tube packaging: Compression springs are transported in tube packaging. Tube packaging ensures that they can be inserted without problems, down to the last spring. Sub-assemblies, bent strip parts and laser-generated samples are transported in blister or polyethylene packaging to protect them during transport and storage. Modifying specific extraction mechanisms: We would also be pleased to assist you with our expertise regarding the modification of specific extraction mechanisms. This eliminates downtime of highly complex assembly equipment caused by springs getting caught up in one another.
Request for a quoteAVOLA MASCHINENFABRIK A. VOLKENBORN GMBH & CO. KG
Germany
CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!
Request for a quoteSPIROL
Germany
Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.
Request for a quoteFRANKE GMBH
Germany
The bearing assemblies are equipped with the S10 boot seal as standard. Temperature: –30 ° C to +80 ° C (NBR). Max. Peripheral speed: 5 m / s. For the sealing of the construction (e.g. when using a bearing element) the seal can be ordered by the meter. The joint is then glued with Loctite 401® adhesive. Special seals are available on request. Franke offers Viton seals for high temperatures or aggressive media.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Filter out contaminants during the dissolution testing process POREX ® Dissolution Filters are used in conjunction with pharmaceutical tablet and capsule products to help filter contaminates during the dissolution testing process. Heavy metal free POREX ® Dissolution Filters are available in cannula, circular/disk and filter frit designs in a wide variety of porosities and: Meet U.S. Pharmacopeia Standards for elemental impurities Can be used with molecular diagnostics, clinical IVD, infectious diseases and research applications. Will withstand automated assembly equipment and resist breakage due to strong, durable and lightweight construction. Are designed with chemically-resistant media which will tolerate most acids and bases. Offer instant pore size identification with color-coded resins. Cannula Filters POREX ® Cannula Filters are used on the end of a sampling cannula and feature a large surface area and optimized flow rate for an ideal choice in applications with a high...
Request for a quoteSPIROL
Germany
Offered with or without a head, Straight Pins are distinguished by their uniformity. The chamfered ends are more consistent than tumbled edges—making installation with automatic assembly equipment more reliable. Straight Pins are retained by compressing the host, not the inflexible solid pin. They are suitable for use in plastics for press-fit applications limited to those cases where the host material can withstand compression in the order of 0.05mm – 0.08mm (.002” – .003”). Straight Pins are often used to replace Ground Dowels in applications that do not require the tight tolerances of a Ground Dowel.
Request for a quoteHEAVYDRIVE GMBH
Germany
Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.
Request for a quoteCARL STAHL KROMER - GERMAN MADE SPRING BALANCERS
Germany
Tool handling support for industrial environements (assembly)
Request for a quoteCARL STAHL KROMER - GERMAN MADE SPRING BALANCERS
Germany
Ergonomic tool support for industrial environments. Tool positioning and handling support for hand tools in assembly and production
Request for a quoteCARL STAHL KROMER - GERMAN MADE SPRING BALANCERS
Germany
- zero-gravity ability - ergonomic tool support for industrial environements - assembly & production - handling of tools - positioning of tools
Request for a quoteCARL STAHL KROMER - GERMAN MADE SPRING BALANCERS
Germany
Ergonomic support for heavy-duty hand tools up to 300 kg Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Patented freewheel protects against overrotation when the spring is released Infinitely variable load setting via endless screw
Request for a quoteRUHLAMAT GMBH
Germany
Ruhlamat plans, develops and manufactures original equipment of assemblies up to complete modular machine systems exclusively for customers with the respective requirements for standard products. Project planning. Development. Manufacture. Service. As a leader in specialized machine construction, ruhlamat has an excellent foundation for an extensive range of services in the field of machine construction at its site in Marksuhl: Project planning Development and design Construction Project management Product management Product maintenance Quality management Manufacture and assembly Service and training Logistics. Call orders. Needs-oriented deployment. The desired qualities and quantities are delivered within the scope of call orders with variable contents or also from stock on the basis of the forecast data you have provided. Series products. Small and medium volumes. In close cooperation with our OEM customers, we compile tailor-made technical and commercial solutions for...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JOSEF JASPER GMBH & CO. KG
Germany
From unloading to testing... We offer qualified assembling services for our manufactured products, if required also for free issue equipments. In case of assembly provided by costumer we allocate a supervisor during unloading and mounting on demand Additional assembly services Logistics on construction site Construcion site equipment Planning of crane assignments Providing of scaffolding Surface treatment onsite Testing and measuringn
Request for a quoteRAFI ELTEC GMBH
Germany
RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Whether with a mini-wave or a Wörthmann wave, we deliver customary RAFI Eltec quality on our automatic soldering equipment even for wired assemblies. We apply various technologies here – coordinated to each individual project. Our focuses: - Wired assembly - Wave soldering (ROHS-compliant or leaded) - Automated selective soldering - Lift-dip soldering (multi-wave) - Manual soldering - Assembly - Visual inspection You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions and achieve our mutual goal: your satisfaction and success.
Request for a quoteResults for
Equipment assembling - Import exportNumber of results
20 ProductsCountries
Category