Environmental protection - Import export

For all cleaning methods, operators must comply with the applicable statutory regulations at local, national and international level. The handling and the treatment of the cleaning media are two important aspects that must be taken into account when assessing cleaning tasks and suitable methods.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Our high-quality steel barrier not only serves as scratch as well as ram protection, but also as effective collision protection for forklift trucks, pallet trucks and other vehicles in working environments. With its eye-catching yellow powder coating, it not only offers an attractive appearance, but also improves visibility to prevent accidents. The barrier is available in different overall lengths - 400 mm, 800 mm, 1000 mm, 1200 mm and 1500 mm - and flexibly adapts to your needs. Its robust construction and simple installation guarantee immediate protection for your walls. Thanks to the 45° mitre, it is even possible to build the barrier around corners to ensure comprehensive protection. Invest in the safety of your working environment and order our steel barrier as scuff protection today. Rely on quality, functionality and durability for effective protection against damage from vehicles.

With the new G 1910-02 and G 1910-20 CO₂ handheld measuring devices users benefit from a compact CO₂ monitor with integrated sensor and an optical and acoustic alarm function that has an impressively long rechargeable battery life, easy charging and a very wide measuring range.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

Packaging bucket for transport, packaging and storing of various materials. Suitable for the food or building material industries and non-aggressive chemicals in environmental protection, hospitals and the household. With strong handle. Quality closure on the bucket for product safety.

Discover our highly effective mobile welding protection wall made of cardboard - the perfect solution to protect your working environment from flying sparks and fire hazards during welding and grinding. This cut-to-size cardboard combines welding protection with environmental protection.

Our collection of sustainable workwear not only offers maximum comfort and functionality, but also a clear commitment to environmental protection and durability. The sustainable workwear is made from high-quality recycled polyester in our own factories and is OEKO-TEX® STANDARD 100 certified.

Less wear, longer working lives In the automobile industry, environmental protection is also playing an ever greater role. With its dimensions, bodies form by far the largest part of recyclates in automobile recycling. One of the major challenges in crushing vehicle bodies is in the vulnerability to wear of many hammer axes. We have optimised our solutions over a number of years and supply hammer axes for large shredders in various diameters, which are characterised by extreme toughness and dimensional stability. This is how our clients profit from optimum working lives for their recycling machines.

AdBlue® – the effective fuel for modern diesel engines with SCR catalytic converters. This innovative solution actively reduces emissions and nitrogen oxides (NOx) in diesel exhaust gases and enables compliance with the strict Euro 5 and Euro 6 standards for trucks, cars and commercial vehicles. AdBlue® has been specially developed for vehicles with SCR catalytic converters (Selective Catalytic Reaction) to significantly reduce their exhaust emissions. As a clear, aqueous solution, it consists of 32.5% high-purity urea. By using AdBlue®, you can contribute to active environmental protection with your vehicle fleet and meet the required exhaust emission standards. Our advisory team is available to answer any questions you may have.

The ideal sneeze guard for the counter area! Place this display in a bakery, canteen or bistro. In addition to the possibility of inserting three baking trays or trays measuring 400 x 600 mm, your products are perfectly protected from environmental influences in this display. The baking trays are inserted at a bevelled angle and thus presented at the optimum angle for your customers. Expand your fresh food counter by three additional levels. Create additional sales space for your baked goods and snacks. The two suction cups on the bottom of the sneeze guard promise a particularly secure hold. For cleaning the material we recommend warm soapy water and a soft microfibre cloth.

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

With maintenance-free Levelmount® machine supports, EFFBE meets the high expectations for the elastic support of machinery, plant and equipment. Thanks to our sophisticated logistics, we deliver most EFFBE parts directly from stock without delay. Nowadays, in the installation of machinery ever greater demands are placed on elastic supports: It is important to combine increased work performance with optimized production processes and greater environmental awareness, from vibration protection and noise insulation to vibration decoupling. EFFBE faces up to this challenge with maintenance-free Levelmount® machine supports, which keep rational, reliable production planning free from structural and environmental constraints. We offer vibration dampers and vibration isolators tailored exactly to your needs to reduce the transmission of vibrations - right through to vibration decoupling.

Double tube safety heat exchangers play an important role in applications where preventing media mixing in the event of a leak is paramount. They are widely used and accepted as standard in the chemical industry, power, heavy and light industry, oil & gas, marine, transportation, refrigeration and food & beverage sectors. Kelvion has a long track record in developing ground-breaking technologies always aiming to reach the highest levels of safety, environmental protection and cost-efficient operation. Our expert engineers are fully trained to provide you with the best-in-class solutions tailored to your specific requirements. As industries face ever stricter regulations for safeguarding requirements of environment and water supply, double tube safety heat exchangers are the technology of choice.

Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress. The broad portfolio includes RJ45, USB/Mini USB and Fibre Optic LC Duplex connectors in plastic, metalized plastic or full metal.

Nominal volume: 50 L + manufactured by compact injection moulding process in accordance with DIN 30713 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + extremely rugged and durable material; resistant to frost, heat, UV radiation and chemicals + stackable, thus facilitating space-saving storage and transportation + quick and easy installation on posts, pillars, walls or grating + lockable with triangular key as standard feature + available in orange or green; additional colours upon request + all metal parts are zinc-plated and corrosion-resistant + environmental protection: the litter bins can be fully recycled at the end of their useful life

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

The protection of the environment is essential for FLOETER. During the product development, the environmental benefits are a key goal for us. This is why we optimize our technologies until we can present products that keep the balance between product protection and environmental compatibility at all times. With minimized energy requirements, reduced film thickness and the lowest possible noise pollution. Product protection and environmental compatibility Both online and in the industry, every package must be product and shipping-friendly. In line with this, at FLOETER we have developed packaging solutions that leave nothing to chance. From packaging material to machine configuration, we offer the right solution for every requirement: integral, individual and well thought-out. Just put us to the test.

Suitable for paneling, furniture, doors, cork, boards, glued wood and plywood, tongue and groove boards indoors (also damp areas like bathrooms, saunas, kitchens). Long-term and environmentally friendly protection as well refinement of any kind of wood. Durable UV-resistance and surface protection (against water, drinks, several household chemicals, etc.). Also suitable for outdoors: windows, window shutters, balconies, fences and also usable for refurbishment on cleaned, viable, old coats.

Suitable for paneling, furniture, doors, cork, boards, glued wood and plywood, tongue and groove boards mad of any wood indoors (including damp areas such as, bathrooms, saunas and kitchens). Long-term environmentally friendly protection, as well as refinement of any kind of wood. Strong protection of surface against UV-rays (and water, drinks, various household chemicals and more).

Suitable for garden furniture made of teak, yellow balau, oak and other wood. Pearlescent Wood Finish preserves and protects wood against environmental and weather influences, UV-rays, water and dirt. Pearlescent Wood Finish is a solvent-free care emulsion that rejuvenates grayed and faded furniture and renews the grain.The integrated pearling effect renders the wood water-repellent and UV-resistant for a long time.

Suitable for for garden furniture made of teak, yellow balau, oak and other wood. Bio Teak and Garden Furniture preserves and protects wood against environmental and weather influences, water and dirt. Our product is solvent-free, rejuvenates grayed and discolored furniture and re-emphasizes the grain. The integrated pearling effect leaves treated wood water-repellent for a long time.

Transformer tracks and transformer room equipment Our motto: »Stable mounting and rapid changing«. The development of a flexible track system specially designed for mounting and changing transformers means you profit from the advantages of a uniformly stable and practical solution. Design: Transformer tracks with lateral gauge limitation Transformer track mounting Transformer vibration suppressors Transformer blocking spar with spar bracket Safety and instruction signs Steel basin, enclosed design Stainless steel basin, enclosed design With removable front and side wall Your advantages, your safety! Our tracks and mountings can optionally support loads of 3.5 t or more. We pay particular attention to your wishes in this respect and can realise adjustable track gauges, optional spans and guarantee uncomplicated transformer changing. Glass fibre-reinforced vibration suppressors ensure a secure mounting for the transformer. Drip trays ensure maximum environmental protection...

PROCONTROL Precise metering and constant pressure of sealing water (p = 1 bar above media pressure) - environmental protection and cost reduction in fact of reduced seal water consumption Flow and pressure monitoring - protects the aggregate from failing (inductive alarm system) Stable and compact construction guarantees safety and simple handling Corrosion and temperature resistant Displays are easy to read and clean With an inductive switch (special component) alarm system can be used. Technical parameters Flow range 0.5 up to 1.5 ltr/min 0.5 up to 3.0 ltr/min 1.0 up to 8.0 ltr/min 2.0 up to 15.0 ltr/min Temperature: t = … +80 °C Pressure: p = 10 bar (Option 25) Main application Pumps with mechanical seals with flush port Stuffing box packings with lantern rings Suitable for All Industries Accessories and options Pressure valve for creating blocking pressure Pressure Gauge Stand Inductive switch Hoses, connecting...

- For contactless reading and writing of RFID chip cards - Used in e.g. refineries, tank farms, chemical industry, medical industry, food industry or power plants - Allows the build-up of intrinsically safe access control and identification systems - Application areas: loading at filling gantries, weighing, entry and exit area - High protection against rough environmental conditions due to sturdy aluminum housing (optional available as stainless steel housing) - Explosion protection according to European ATEX-standard 2014/34/EU BENEFITS - Type of protection IIC - Contactless reading - Tamper-proof by additional data encryption via a special Timm Elektronik card coding - Temporary data at chip cards can be saved and recalled - Individual, customer-specific coding possible