Engineering for mechanical systems - Import export

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

IFA Technology offers the complete range of conveying systems, storage systems and handling systems in mechanical engineering. Our plants and systems can be integrated into your own conveyor line or designed as completely automated systems. External plant components can also be integrated into our superordinate control system. Our plants and systems are mainly used for bagging or bottling or batch loading systems. Application of conveying, storage and handling systems: Dosing and application of liquids in the plant process Dosing and mixing of powders, fibres and liquids Bagging and bottling systems integrated into a production line Silo systems and tank systems with conveying paths and mixing systems Pipe shell plants

Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.

Customer service and system maintenance – fast and future- oriented. Our goal is to create low- maintenance systems that guarantee maximum precision and maximum work capacities. Of course we also adapt our systems to satisfy our customers’ individual needs and to meet special requirements. We develop solutions to perfectly integrate our soldering systems into any given production process. At any time, STRECKFUSS SYSTEMS provides customers with spare parts, wearing parts, and alteration parts. We are a service team of experienced electrical engineers, mechanical engineers and system manufacturers. Beside the firm maintenance dates, our team is always available for short- notice duties. STRECKFUSS SYSTEMS guarantees an excellent customer service and takes on the responsibility for all system maintenance work with regard to both the new STRECKFUSS soldering systems and older models. Our customer service – an overview: commissioning briefing user training system inspection system maintenance system repair works on- call service system modification waste management

Our combined turned-milled parts which are produced fully automatic on CNC machining centers are used in general mechanical engineering and actuator systems.

QUICK CHECK GUN DRILL Eight basic cycles, based on experience, are included in the scope of delivery of the machine and guarantee professional processing of the workpiece. Specific groups for cross drilling cycles are available as an option. This makes workshop programming and programming of crossing holes easier by adapting the feed when hitting the cross hole. This increases the tool life significantly.

MFZ SERIES – FIT 2 PART – YOUR TASK DEFINES OUR MACHINE. Highest performance and output per square meter, at the same time lower costs and higher productivity – that was the task for our engineers and developers at SAMAG MachineTools. The result: the MFZ series with FIT 2 PART. The conception of the new series leaves nothing to be desired. Technological know-how - for the highest precision with the greatest possible productivity - coupled with passion and innovation, means we create the opportunity to continue adapting the performance of our MFZ machine tools to your workpiece in the future - FIT 2 PART! Whether they have complicated workpiece dimensions or are looking for the optimal quantity solution with minimal machine investmen

STABILITY AND HIGHEST PRECISION COME BY APPROXIMATE. THE PERFECTLY THOUGHTFUL AXIS CONCEPT IN THE POWER TOWER DESIGN ALLOWS MINIMAL TCP DISTANCE AND MAXIMUM MACHINE STIFFNESS. The POWER TOWER DESIGN impresses with its compact design and extreme rigidity. All components in the force flow are statically and dynamically optimized down to the last detail, thus ensuring perfect work results. The clear separation of all linear axes guarantees long-term dimensional accuracy of all axis drives and sustainably prevents tolerances from overlapping and thereby increasing. Thanks to the large footprint of the Y-tower and the unique DOUBLE BALL SCREW DRIVE, we always achieve optimal support for the drill beam in the TFZ and at the same time an extremely short distance between the swivel bearing and the tool center point (TCP distance), for maximum rigidity with large transverse forces.

THE MULTI-SPINDLE SHAFT DRILLING MACHINES OF THE TBM roto series ARE DESIGNED FOR PERMANENT PRODUCTION USE. THEY ARE PARTICULARLY DURABLE, EXTREMELY ROBUST AND GUARANTEE THE HIGHEST PRECISION: 24/7/365! TBM roto – shaft drilling machine for production For machining rotationally symmetrical workpieces such as gear shafts, camshafts, steering rods, common rails, standard parts... Customer-specific solutions, automation, handling, workpiece clamping, workpiece cleaning… Long-lasting machines for parts with the highest precision Additional units, features or modules available Optimized accessibility to all components for maintenance and service

used horizontal machining center, year of construction: 2008 Product name: MFZ 2-2 Update Used 2-spindle horizontal 5-axis machining center Year of construction: 2008 Sinumerik 840D Powerline control Machine dimensions without coolant system and chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m Weight approx. 20,000 kg (machine without coolant system and accessories) X-axis travel: 450 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Spindle distance 450mm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) High-quality Knoll KSS system with fine filtration Flush gun Complete enclosure Tool storage (2 x 50 tools) Operating voltage 400V 3N ~ Control voltage 24V DC Connection value machine approx. 72 KVA Compressed air connection 6 bar

4 SIZES AND LOTS OF POSSIBILITIES! THE SFZ SERIES ESPECIALLY SCORES WITH STRONG PERFORMANCE. Starting from the four basic models of the SFZ series; We offer modular equipment variants, depending on performance requirements. Completely in the spirit of FIT 2 TASK. In order to guarantee individual performance, the SFZ machines are equipped with the latest generation of Heidenhain iTNC640 controls as standard. SIEMENS 840D SL is optionally available as an alternative, depending on your requirements.

SIMPLY ROTATE THE 3D UNIT BY 90° AND THE MASS THAT HAS TO BE MOVED IS ONLY HALF AS BIG! ZERO GRAVITY DRIVE – OR TURN WITH MASS. Through the rotation and the resulting reduction of the mass to be moved - by around half - we can use the ZERO GRAVITY DRIVE to achieve an incomparably efficient, dynamic and stable type of spindle movement in all three spatial axes. This new kinematic concept is unique in multi-spindle machining centers and enables maximum efficiency and absolute precision on the one hand and maximum utilization and extreme cost-effectiveness on the other.

PENDULUM CHANGER – GOOD FROM EXPERIENCE. The W-axis principle, established by SAMAG since 1995, enables workpiece loading to be carried out parallel to production times. The workpiece carrier table is moved in the swivel drive from 0 – 180°. This means that the next loading and unloading of workpieces can take place during processing. Efficient and useful also for robot-assisted loading.

The frame construction concept offers reliable stability thanks to its closed design. The power transmission through the axis movements in the working area does not cause any deformation of the frame. This extremely stable solution is a prerequisite for the high-precision machining of your workpieces and guarantees consistently high process quality. The new generation of the MFZ is also built on the solid machine bed with Hydropol ® filling. The specially developed composite material improves the stability of machine tool beds. Hydropol ® makes a further step possible in terms of the interaction between energy efficiency and high productivity.

2-spindle solution with a 4-part clamping device Editing the OP 20 after the turning process Piece time less than 90s possible

4-spindle solution with HSK-A100 on MFZ Machining of the free cut with 4 spindles possible OP 10 and OP 20 are processed in one machine Unit times less than 50s possible

4-spindle solution for pre-processing 2-spindle solution for fine boring with independent X, Y and Z axes Cycle times less than 30s possible

Machining with 4 spindles OP 10 with 4 part clamping on workpiece carrier unit OP 20 with 4 workpieces on 2 rotary tables (5-axis machining

2-spindle solution with 4 parts clamping Processing in one setup Machining time less than 82s per workpiece Machining with 4 spindles Tool monitoring for all tools takes place parallel to production time