Embossing - Import export

max. size 26 x 38 cm age 1957 2 closing frames ink unit not complete Delivery time: immediately from stock Ref: HE220074A Please ask for price. We ship and install worldwide!

max. size 38 x 52 cm age 1958 single sheet feeder inking unit complete for printing and punching Delivery time: immediatelly from stock Ref: HE230108A Please ask for price. We ship and install worldwide!

max. size 33 x 38 cm age 1998 die cutting machine tunnel die cutting machine 5 clamp arms counter pressure GD specially for inmould labels max. diameter for round shapes 365 mm max. 9 cycles / min (offload - without GD) Ref: BU230110T Please ask for price. We ship and install worldwide!

max. size 26 x 38 cm age 1965 2 closing frames inking unit dry sprayer Ref: HE240060A Please ask for price. We ship and install worldwide!

Embossing punching is an important technique in the automated production of car parts, guided by robots. A laser system with a sensor harness measures the car body and its machining plane so that the embossing depth can be determined with maximum accuracy. The car body part is then embossed accordingly and all necessary holes are punched. Embossing punching is used for the fixture of headlights, bonnets, sliding roofs, boot lids and locks as well as wings. Our embossing punching machines are suitable for single-layer steel and aluminium sheet metal. This offer includes: • Embossing punching frame (assembly elements or components can be perfectly aligned to a mating part of different dimensions) • Handling: robot-guided via defined interfaces (mechanical, electrical, pneumatic) • Servo motor-driven Tool inserts and measurement are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer!

Domes produced with ECKOLD machines in automotive industry make sure that there is only a minimum offset between the securing screws and the surrounding metal. ECKOLD machines can produce two or even three domes in a single process. Our dome embossing machines are suitable for both single and double sheet steel or aluminium parts and come with a hydro-pneumatic or servo motor drive system. With our machines, domes can be embossed without preliminary holes (even when combined with final hole punching for a defined diameter). This offer includes: Dome embossing frame Embossings: 1 piece/stroke Embossing geometry: according to data set Drive: pneumohydraulic Mechanical interface: support stand Embossing inserts are not included in the scope of delivery. They must be chosen separately, based on the actual task. We optionally offer hydraulic or servo motor drives as well as multiple embossings/stroke.

Braille embossing dies made from brass in recessed engraving Braille embossing dies made from brass in recessed engraving – a matrix for the raised area, e.g. for private and business documents. The design is also possible with a counter die, the male mould. The relief-like and tangible print puts a special mark on the paper. Print shops give paper the little extra with this production method.

Embossed in relief, back is flat, made of iron, also possible with colored enamelling, min order: 100 pcs.

LT Ultra has also implemented the technology of metal-cutting microstructuring in roller lathes. We can offer the production of structures in a grid between 5 and 150 µm in optical quality for provided rollers.Offer up to a length of 2500 mm, a diameter of up to 800 mm and a maximum weight of 2500 kg.

With the chip-removing microstructuring of metal surfaces, LT Ultra offers the right manufacturing technology for the production of embossing tools with optical surface qualities that allow economical replication in large numbers. Examples of microstructuring are the production of microfluidics or microlenses on our ultra-precise multi-axis machines. We can manufacture the structures directly in various materials such as brass, chemically deposited nickel or in selected hardened steels.For the replicating production of optical components, ultra-precise mold inserts made of steel are of particular interest due to their very long service life compared to other materials. In order to avoid the final polishing, which often leads to an undesirable change in shape or which is impossible due to a high structure density, LT Ultra offers ultrasound-assisted machining of steels with geometrically defined cutting edges made of monocrystalline diamond.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

A–Z index dividers with embossed tabs for alphabetical sorting. • Index with printed tabs for alphabetical sorting • Tab imprint: A-Z • Division/sheet: 20 • Punching: 60 / 80 mm • Made from PP • For format: Partial cover for A4 portrait format • Dimensions: 180 x 215/230 mm

This embossing device in compact table-top design is convincing thanks to easiest handling.

A professional manual embossing device for the manual marking of hose fittings with 1 or two lines.

This embossing device in compact table-top design is convincing thanks to easiest handling.

ECKOLD extrusion embossing allows for direct screwing in sheet metal and does away with press-fitted or welded nuts. The embossed structure formed in the process increases the number of turns for the screw and thus enhances its grip. In addition, extrusion embossing allows for higher torques than would be possible with simple screwing of multiple sheets. The technique is suitable for use in virtually all industries where sheet metal is machined and joined - stationary, robot-controlled or as a punch press system. This offer includes: Servo motor-driven extrusion embossing system • Embossing punching frame, horiz. throat 150 mm stationary or robot-guided • Servo motor-driven Press force approx. 58 kN Working stroke approx. 100 mm • Tool holder • Control cabinet incl. software ECKOLD VISU Embossing inserts are not included in the scope of delivery. Scrap suction/micro spray system on request. Contact us for a customised offer!

for perforating thin aluminum sheets (eg heat protection sheets) and foils

Application in film production and equipment as well as in the production of hygiene goods

All our chocolate candy tin box can be customized with your artwork and idea shapes. Normal shapes are: Oval, Rectangular, Round, Square, Octagonal, Heart and so on. Artwork Format: AI, PDF, EPS, CDR, PSD Printing: Offset printing(CMYK or PMS) Glossy or matt finish outside Natural tin silver or gold varnish inside Metallic effect available Accessories options: Sponge/foam/EVA insert Transparent PET bed/cardboard bed/paper band Velvet trays, locks, handles Decoration options: 3D embossing Spot glossy/matt finish Crackle varnish, pearl varnish Leather effect PVC&PET clear window Material: First grade tinplate, 0.21/0.23/0.25/0.28mm thickness for your choice Usage: for gifts, food, candy, confections, tea, cigarette, tobacco , candle, Christmas, cosmetic etc. Certification: FDA, EN71, SGS

The marking unit 315 is a very well protected and highly robust device designed for 3-shift operation. All components of this coordinate unit have been developed for regular use and are continuously tested to ensure a constant quality. The set of a marking head and a controller is integrated as a built-in unit by system producers for direct workpiece marking e.g. in transfer lines, production machines or gauging and testing stations. The pneumatic (PN) or stepping motor (SM) adjustment unit allows to forward the marking unit to the workpiece even at places which are difficult to access. Marking unit for marking processes: scribe, stylus, dot marking and DataMatrix coding (ECC200)

The workshop unit 322 is a name plate marking unit and is used for very deep markings to mark individual components, prototypes and limited-lot productions. Stable, long life and low-maintenance machine design. Designed for continuous production. Available marking technologies: scribe, stylus, dot marking or DataMatrix marking.

By a process of embossing we structure surfaces of metal strips and foils. Technical structures are created which give you a better stability in your processing as well as a wear-resistant surface. Foils and strips of aluminium, cupper or steal of all degree of hardening will be formed for you. The process of producing directs the adaptation of width and length of the coils. The processed foil can be used by you in an optimum way.

This easily transportable handheld unit for dot marking, stylus and DataMatrix coding is best suited for many areas in industrial applications where readable markings on materials like steel and aluminium are required. Due to its good ergonomical features and its easy way of operating the device it is eminently suited for usage in workshops, in quality control and in stock management. The marking unit 313 is a portable marking device and is operated manually. Even with larger font sizes markings of single or multi lines are possible. This marking unit is available with table and column for a flexible handling. The model 313 is setting new standards with a weight of only 5.5 kg. Measuring rather small it still offers a large marking area of 120 x 20 mm. With the help of quick changing optional workpiece support it is possible to adapt to almost all workpiece geometries.

The built-in unit 313 can be integrated in production lines. It is suitable for plain text markings in stylus marking or DataMatrix coding in steel or aluminium. Scribe marking is also possible. Standard delivery is with LDM Macro software. Standard settings are printer or layout mode. As an option the VisuWin SE as well as VisuWin PRO PC software are available. Diversity in marking technologies: stylus, scribe and dot marking, DataMatrix coding (ECC 200).