• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • electricity insulation

Results for

Electricity insulation - Import export

Germany

Germany

Verified by Europages

VDE approved mat designed for use in front of open switchboards and high voltage equipment. Provides safety for operatives against electric shocks. Fine fluted surface has slip-resistance benefits. Tested to 50,000 volts according to DIN EN 60243-1 (VDE0303 part 21) IEC 60243-2:1996

Request for a quote

Germany

Verified by Europages

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened

Request for a quote

Germany

Verified by Europages

• With protection cap • With straight, half-round polished blade for plastic cables • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened

Request for a quote

Germany

Verified by Europages

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

Request for a quote

Germany

Verified by Europages

• With protection cap • With hooked, insulated blade • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened

Request for a quote

Germany

Products for industrial cable protection systems - Safety even under extreme conditions Cables are often exposed to various safety risks: Overheating Cold Humidity v.m. Adequate protection is therefore essential if you want to be sure that all connected devices and applications function smoothly. At FRÄNKISCHE you will therefore find products for high-quality industrial cable protection systems from FIPSYSTEMS. The FIPMETAL® metal conduits made of galvanized steel and with special clamping are characterized by their high flexibility and good mechanical protection and can therefore be installed in many industrial applications.

Request for a quote

Germany

DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio. Advantages of DURAVOLTA •halogenfree according to IEC 61249-2-21 •outstanding RTI el von 120°C according UL 746B •very good electrical insulation properties by high resistivities and dielectric strength •non hygroscopic •very high chemical resistance •very good processing properties •RoHS and WEEE compliant •producable in thicknesses according your needs •recycable •made in germany

Request for a quote

Germany

DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio. Advantages: •halogenfree according to IEC 61249-2-21 •outstanding RTI el von 120°C according UL 746B •very good electrical insulation properties by high resistivities and dielectric strength •non hygroscopic •very high chemical resistance •very good processing properties •RoHS and WEEE compliant •producable in thicknesses according your needs •recycable •made in germany Application: •computers and computer peripherals •electrical and power distribution systems •telecommunications equipment •conventional and uninterruptible power supplies •medical equipment and lighting •consumer products

Request for a quote

Germany

Hitachi High-Technologiees Europe GmbH is very pleased to introduce Toyal Vacuum Insulation Panels to the European Market. Our VIP's advantages are represented by Low Thermal conductivity, light weight, opportunity to save space and save energy and its eco-friendly performance. Features Low Thermal Conductivity: The VIP achieves the best performance of insulation in the market. Using the know-how in the field of laminating materials as an aluminum foil manufacturer, with the combination of a new developed core material (glass wool), it achieves superior performance. (a thermal conductivity: in 0.0020W/m, k *1) Leight Weight: Compared to our conventional core material, it is 1/4 lighter. It is the best solution in the wide-ranging field which requires lighter weight, such as automobile, refrigerator, cooler box, thermos, etc.

Request for a quote

Germany

Verified by Europages

xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range Cage: PEEK PA Balls ES = stainless steel GL = glas PAI = Polymer xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range

Request for a quote

Germany

Verified by Europages

inch sizes The inch dimensions are finding their way into the range of xirodur® B180 polymer ball bearings! In combination with the PA cage and either glass or stainless steel balls, they offer a long service life and excellent value for money. They can be used in up to 80°C, are corrosion resistant and free from maintenance and lubricants. Nonmagnetic and washable Corrossion-resistant Predictable service life Lightweight Electrically insulating Application areas:Medical technology, plant construction, cleanroom technology, materials handling inch sizes The inch dimensions are finding their way into the range of xirodur® B180 polymer ball bearings! In combination with the PA cage and either glass or stainless steel balls, they offer a long service life and excellent value for money. They can be used in up to 80°C, are corrosion resistant and free from maintenance and lubricants. Nonmagnetic and washable Corrossion-resistant Predictable service life Lightweight Electrically insulating Application areas:Medical technology, plant construction, cleanroom technology, materials handling

Request for a quote

Germany

Verified by Europages

xirodur® B180 radial grooved ball bearing xiros® B180 polymer ball bearings are suitable for use up to +80°C. The specially developed material xirodur® B180 provides high durability and good value for money. Lubricant- and maintenance-free Nonmagnetic and washable Corrossion-resistant Life time predictable Lightweight For shaft diameter 3–60 mm Electrically insulating Industries:Measuring technology, electronics, office technology, vacuum technology, cleanroom technology, etc. Balls: xiros® material data 3D CAD data on xiros® B180 polymer ball bearing xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® B180 radial grooved ball bearing xiros® B180 polymer ball bearings are suitable for use up to +80°C. The specially developed material xirodur® B180 provides high durability and good value for money. Lubricant- and maintenance-free Nonmagnetic and washable Corrossion-resistant Life time predictable Lightweight For shaft diameter 3–60 mm Electrically insulating Industries:Measuring technology, electronics, office technology, vacuum technology, cleanroom technology, etc. Balls:

Request for a quote

Germany

Verified by Europages

Good with chemicals d1 [mm]: Rings: Cage: Balls: xiros® material data xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® C160 radial grooved ball bearing The ball bearing material xirodur® C160 offers extreme media resistance, but is inexpensive. xirodur® C160 can be used in the temperature range of up to +80°C. Lubricant- and maintenance-free Resistant to corrosion and chemicals Nonmagnetic and washable Life time predictable Lightweight Low friction Electrically insulating Industries: Electroplating, chemical industry, plant design d1 [mm]: Rings: Cage: Balls:

Request for a quote

Germany

Verified by Europages

Mineral additive for thermal conductivity with simultaneous electrical insulation With the white, mineral additive, thermal conductivities of more than 2 W/mKin plastic compounds are possible without any problems.

Request for a quote

Germany

Verified by Europages

Do you need safe and corrosionresistant access systems for your operations? And do these stairs also need to be movable? Then get in touch. We can design and manufacture special solutions as oneoff commissions or small batches, or a standard solution in larger quantities. Made of glass fibrereinforced plastic profiles, our mobile stairs are suitable for using in corrosive environments or for sites where a stairway needs to have an electrically insulating effect.

Request for a quote

Germany

Verified by Europages

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

Request for a quote

Germany

Verified by Europages

Protection of sensitive components such as sensors, probes, measuring instruments or semiconductors, such as diodes, transistors thyristors through improving the heat linking to cooling plates or metal housings For optimal cold transfer when using Peltier elements Advantages and benefits Highly effective due to good heat conductivity Electrically insulating Economical due to minimal consumption quantities Resistant to acids and lyes Without significant change in the consistency as well as constant thermal conductivity across the entire temperature range

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

Smart automation concepts enable us to meet the highest standards of manufacturing. Our products are manufactured in Germany and made in USA, in a cost-efficient manner. Benefit from our production expertise that has been continuously developed over many decades. Mechanical protection, reliable electrical insulation, moisture shielding and heat dissipation - with continuously optimized potting resins (polyurethanes, epoxies, etc.) and potting equipment, PRUFREX is a leader in the field of vacuum potting. When it comes to the safe protection of your electrical and electronic components, our state-of-the-art, automated manufacturing equipment meets all contemporary requirements. The use of specially adapted epoxy and polyurethane potting compounds ensures excellent potting characteristics and the best-possible impregnation of components and coils. These optimised potting compounds also contribute to optimal heat dissipation.

Request for a quote

Germany

Verified by Europages

Due to the wide range of different designs, perfectly suitable PTFE seals are available for every application. The PTFE gaskets from billi are characterized by high dielectric strength, excellent electrical insulation properties and a low thermal conductivity. All items are manufactured with a high processing quality. Discover the various PTFE gaskets in our online catalogue and order the right products for your application directly from billi. Depending on the respective requirements, different PTFE seals are suitable for you: Our comprehensive range includes, for example, PTFE thread sealing tapes with a temperature resistance of -200°C up to +260°C. The PTFE tapes are both, odourless and insoluble. In addition, the PTFE thread sealing tapes have a particularly low coefficient of friction, which improves their performances. We also offer PTFE cord with a pressure resistance of up to 10 bar. Possible applications include valves as well as piston and centrifugal pumps.

Request for a quote

Germany

Verified by Europages

Immersion heater for laboratory and electroplating technology Advantages: Maximum energy utilization through infrared radiation - the cladding tube is infrared permeable; through heat conduction - the cladding tube made of quartz glass enables particularly good heat transfer. Temperature resistance Since quartz glass has practically no thermal expansion, such immersion heaters are particularly resistant to heat changes. Acid resistance Quartz glass immersion heaters are almost resistant to acids except phosphoric acid above 300 ° C and hydrofluoric acid. They are therefore particularly suitable for the direct heating of chemicals in the laboratory and electroplating technology. electric security The cladding tube made of quartz glass is an excellent electrical insulator - safe contact protection; optimal electrical safety through earthing of the interior. In compliance with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.

Request for a quote

Germany

Verified by Europages

The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. Our range of PEEK tubes starts with 25mm up to 1.480mm (external diameter); 20mm up 1.300mm (internal diameter). Our PEEK tubes are also available made of compounded PEEK.

Request for a quote

Germany

Verified by Europages

A unique assembly of special textile panels and various closing/attachment systems to guarantee: Ultra-fast and simplified installation and removal without the need for tools. Efficient and long-lasting protection for your equipment. Improved MTBF (Mean Time Between Failures) and MTTR (Mean Time To Repair) thanks to quick access to the welding gun, thereby saving valuable time during maintenance operations. Optimized operating costs through easy replacement of worn parts only. They are untearable and electrically insulated, and are guaranteed halogen-free and silicon-free. The coatings on the two sides prevent the fabric from soaking up any water or oil in the event of leakage. Limited splatter adhesion and M1 fire rating classification complete the high level requirements.

Request for a quote

Germany

Verified by Europages

— Superior electrical insulation and heat dissipation capability — Compact package with high force output — beam design for excellent structural integrity and strength High speed and high precision High-rigidity direct drive coupled with closed-loop control system enables precision control to attain high speed operations with excellent precision performances. In addition, the ironless linear motors are stable and smooth when operated at low speeds. Simple mechanical structure Multiple forcers, each operated individually, can be installed on a single magnetic way to form a simple overall structure that can be readily assembled. For high cleanness requirement applications The linear motor series offer solutions to dirt buildup and lubricant spray mist problems associated with conventional transmission structures containing gear gaps and ball screws. Hence this series is ideal for applications in dust-free environments.

Request for a quote

Germany

Verified by Europages

FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.

Request for a quote

Germany

These insulating cases combine electrical insulation with high mechanical strength. As they are resistant to electrolytic corrosion, they are essential for connections between incompatible metals. Material: PA-glass fibre reinforced Colour: black Colour white on written request.

Request for a quote

Germany

Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.

Request for a quote

Germany

Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Item with last digits 599 = dyed black by emico Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.

Request for a quote

Germany

Facts: Housing of very impact-resistant and abrasion-resistant plastic Cable drum of abrasion-resistant plastic High-strength special suspension spring High-strength polyamide cable Elastic cable stop buffer Light-duty spring hook for load suspension Easy load setting via handwheel Electrically insulated suspension Rigid, closed design Standard design includes fall protection Special banded spring

Request for a quote

Germany

Black epoxy coated neodymium magnet is widely used for a lot of applications, mostly in different motors. Also, it will be your best solution if you need to use magnets outdoors or in a humid environment. Black epoxy coating is regarded as the most corrosion resistant coating option of neodymium magnets, this coating gives magnets a flat and black finish. It is a protective material made from epoxybased resin, it can provide Neodymium magnets with outstanding resistance to corrosive chemicals, heat, and ultraviolet light. The main features of black epoxy coating are 1) Nonporous, water and chemical resistant; 2) Extremely impact resistant (contains a form of nylon); 3) Colored black, to prevent visual inspection; 4) Affords high security, once cured, extremely difficult to remove; 5) Nonconductive, an electrical insulator; 6) Low toxicity; 7) Easy and simple to mix; 8) Long pot life; 9) Can be cured in one hour at 65°C (150°F); 10) RoHS compliant.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free