Electrical control systems - Import export

HybridTechnology — just for automobiles? CompuSpray is the LubricationHybrid featuring a perfect addition to the PressSpray Technology, this system will allow selective spray lubrication while fully boxed in a stainless steel housing. Special brushes evenly spread the pulseactivated lube on the strop and prohibit any mist from exiting the system. Excess lube is collected and drained back into the reservoir. 45° angled entry or exit strip guide, made of stainless steel; to support threading if CompuSpray is mounted right after the Feeder GSW offers integration into its electrical controls system for intelligent choice of individual nozzles. this way, a minimal and exactly defined lubrication according to the feeding pattern is possible. The programming and visualization becomes part of the main PLC – for an unbeatable priceperformance ratio!

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures

Pre-fabricated STRATE AWASTATION service buildings are set up directly on top of shafts (STRATE AWALIFTSCHACHT) or optionally alongside shafts on concrete foundation blocks. Pre-fabricated solutions offer the possibility of housing system components e.g. shaft cabinets, control elements, electric systems and service connection so that they are easily accessible integrating further optional system components e.g. STRATE AWAaerob ventilation systems, operating data recording and remote transmission etc. One-piece pre-fabricated concrete building, suitable for road and crane transport with four threaded attachment and transport sleeves Re-siting of the service building is possible Inside walls: exposed concrete, painted with washable dispersion paint, colour according to customer wishes Outside walls: textured render, painted in colour according to customer wishes Floor: smooth concrete floor plate with openings for shaft cover, cable duct etc.

The Gronemeyer accumulation table can store large quantities of glasses, bottles or tins. The products are pushed to the accumulation table if there is backlog. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. In case of malfunction, the electrical control system activates the accumulation table based on sensor messages. After the malfunction ends, the stored products are automatically fed into the line. Technical data: —Chain width: up to 3,000 mm —Usable chain length: up to 20 m —Independent electrical control system Optional equipment: —Complete machine cover made of Makrolon with maintenance doors —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer synchronized switch divides the stream of products batch-by-batch and gently into several lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. Because the number and width of the lanes to be approached can be freely selected, the machine is suitable as product feed for palletizing machines or similar devices. Technical data: —Distribution: Number of lanes depends on the recipe —Distribution process during continuous flow of materials —Product gap: from 15 mm —Conveyor speed: more than 60 m/min. —Lane distance: depends on recipe —Complete machine cover made of Makrolon with maintenance doors —Independent electrical control system with congestion monitoring Optional equipment: —Loading and unloading belts —Infinitely variable width adjustment

The Gronemeyer depalletizer is an economical alternative to a completely automatic machine. It is used when processing small to mid-sized numbers of items. An individual arrangement of depalletizers lets one person operate several machines. Easy operation allows for a short training period for new personnel. Technical data: —Use of EURO pallets (1200x800 mm) or special sizes (1200x1000 mm) —Pallet height: up to 2250 mm —Pallet weight: up to 1000 kg —Depalletizer performance: up to 64 layers/h for 8 pallets —Independent electrical control system Optional equipment: —Unloading belts —Accessible platform according to customer request

The Gronemeyer switch divides the stream of products into two or more lanes during continuous operation or in cycle operation. You can select either a pneumatic or an electrical drive. The pneumatic drive is characterized by a good price-performance ratio. The electrical drive allows you to divide the stream of products into more than two lanes. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 250 mm —Pneumatic drive Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts —Infinitely variable width adjustment —Combination with gripper technology for distribution during continuous operation —Electrical drive for distribution to multiple lanes —Complete machine cover made of Makrolon with maintenance doors

Gronemeyer Heliflex storage systems store general cargo that is up to 400 mm wide and 160 mm high. The products are transported on a plastic Heliflex chain. The chain is wound around two rotating towers in a spiral. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. Technical data: —Chain width: up to 400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment: —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer overhead conveyor is used for discharging or transferring products. Distribution occurs in cycle operation and across the direction of transport. Depending on the use case, it is attached to existing machines to save space, or is set up in a free-standing housing. Even large distances can be overcome with the machine. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 3000 mm —Complete machine cover made of Makrolon with maintenance doors Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts

The Gronemeyer FIFO spiral buffer stores general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The chain is wound around one or two rotating towers in a spiral. The design of the machine permits storing unpackaged food. The machine works according to the First In-First Out principle. Technical data: —Chain width: up to 1,400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer aligner station is a solution if you have to feed glasses, bottles or tins aligned into a filling or labelling machine. By using high-performance product identification up to 350 products/min. can be identified and aligned in a continuous flow of materials. New products can easily be saved with the electrical control system's user-friendly operator interface. Technical data: —Conveyor performance: up to 350 items/min. —Installation length: 1500 mm (identification and alignment) —Infinitely variable adjustment to product height and width Optional equipment: —Camera housing against the influence of other light —High-speed camera for precise alignment even at high conveyor performance —Automatic discharging of faulty products

The Gronemeyer synchronized distributor divides the stream of products batch-by-batch and gently into two lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. The compact design permits simple incorporation into existing lines. Technical data Distribution: 2 lanes Distribution process during continuous flow of materials Product gap: from 5 mm Conveyor speed: more than 60 m/min. Lane distance: 110 mm, 130 mm Complete machine cover made of Makrolon with maintenance doors Independent electrical control system with congestion monitoring Installation length: 1200 mm Optional equipment Loading and unloading belts

The Gronemeyer revolving storage is the space-saving solution for storing solid, cube-shaped general cargo. The storage process occurs in cycle operation. The products move into the machine batch-by-batch and are stored vertically in compartments. The machine works according to the First In-Last Out principle. Technical data: —Length of batch: up to 3000 mm —Number of batches: up to 50 —Independent electrical control system Optional equipment: —Complete machine cover made of Makrolon with maintenance doors —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer head space moistener permits moisting of the cap with the fluid in the container. Machine dimensions depend on the conveyor performance and the desired moisting time. Moisting occurs during continuous material flow. The machine is a space-saving solution due to the vertical moisting track. The design permits products to run through the machine without turning process, if necessary. Technical data: —Conveying performance: up to 60,000 units/h —Moisting path: up to 10 m —Product weight: up to 40 kg —Product width: 20 - 450 mm —Solid steel construction in painted or stainless-steel version —Manual width adjustment —Automatic tensioning station for the cleated chain —Central lubrication system for the cleated chain optional equipment: —deflecting pulleys —motorized width adjustment —machine cover made of Makrolon or steel grid with maintenance doors —electrical control system —loading and unloading belts

Gronemeyer lane bridging increases the accessibility of the various machines in a filling and packaging line. The gripper technology permits space-saving bridging of roads or pedestrian walks. Even large spans can be realised. Technical data: —Conveyor performance: up to 60,000 units/h —Crossing width: up to 6 m —Crossing height: up to 3 m —Product weight: up to 40 kg —Product width: 20 - 450 mm —Solid steel construction in painted or stainless-steel version —Manual width adjustment —Automatic tensioning station for the cleated chain —Central lubrication system for the cleated chain Optional equipment: —Moving deflecting pulleys in the curves to reduce wear on chains and slide rails —Motorized width adjustment —Complete machine cover made of Makrolon or steel grid with maintenance doors —Independent electrical control system with congestion monitoring —Loading and unloading belts

The Gronemeyer discharging device for residual liquid permits emptying residual liquids from reusable bottles. Bottles with large quantities of residual liquid can be fed into the machine via a bypass. Cleaning occurs during continuous material flow. In addition to turning and cleaning, differences in height can be overcome at the same time. Technical data: —Conveyor performance: up to 60,000 units/h —Overhead track: up to 10 m —Difference in height: up to 10 m —Product weight: up to 40 kg —Product width: 20 - 450 mm —Solid steel construction in painted or stainless-steel version —Manual width adjustment —Automatic tensioning station for the cleated chain —Central lubrication system for the cleated chain optional equipment: —deflecting pulleys —motorized width adjustment —machine cover made of Makrolon or steel grid —electrical control system —loading and unloading belts —water lances for cleaning support of the cleated chain

MIXACO Laboratory Mixer HM LAB: The 4-in-1 Heating Mixer for the Laboratory Mix & heat 5 to 20 liters fully automatically: The HM LAB modular laboratory mixer from MIXACO is the latest innovation for use in your laboratory. The wide range of applications and easy handling make it the most flexible mixer solution for your lab. It is a highly standardized all-in-one solution and revolutionizes the entire laboratory work. * fully automated processes * interchangeable vessels in 4 sizes * for demanding mixing applications * heating with full temperature control * quick couplings for compressed air, temperature control fluids, electrical systems * cloud monitoring via the innovative MIXACO Control Center