Results for
ZIMMER GMBH KUNSTSTOFFTECHNIK
Germany
In the area of elastomer technology, the Zimmer Group uses the most modern production processes to manufacture sophisticated workpieces from elastomers. In addition to the transfer molding process, in which the elastomer is placed in a mold, pressed into shape with a die and vulcanized under pressure and heat, we also use the injection transfer molding process. Here, the starting materials are pressed into the mold on an injection molding machine and vulcanize out there. With these two processes, we process a wide range of elastomers such as NBR, silicone, EPDM, FPM or polyurethane. In terms of quantities as well as dimensions, the sky's the limit, because we can manufacture almost any quantity required, from special solutions in quantities of one to medium-sized small batches and large series of more than 10,000 units.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
In the cryogenic blasting process, an enrichment of rubber and plastic waste powder takes place due to fine abrasion during the treatment procedure. Thus the performance and processing time of the blasting-media will deteriorate and decrease its jet-energy. In our cryognic deflashing machines, the blasting-media is primary screened by the treatment drum perforation, however, after a long operating time the amount of rubber and plastic waste powder increases. In order to guarantee a constant, statistically secure and economic processing, this powder has to be removed periodically from the blasting-media. Our automatically working blasting-media recovery machine consists of a suction & drying system and a vibrating-screen unit. The used blasting-media has to be aspirated manually from the deflashing machine. The drying of the polluted wet and cold media takes place in the suction tank and the cleaning by screening with final separation into waste powder, waste media & re-usable media,
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This high performance computer-controlled machine provides maximum economic efficiency at treatment of big batch volumes at high throughput! The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. At any time, this machine is ready for upgrade to automated application, from the automatic loading & deloading of the machine up to a complete full automated feeding & forwarding system. For industry 4.0 demands, the E90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum-only deflashing), suitable for special applications only.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This high performance computer-controlled machine is the optimal solution for mid-sized batch demands at fast throughput times! The E 40 is, like any of our machines, designed for high performance at low consumption of nitrogen, blasting media and electric energy. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. For industry 4.0 demands, the E40 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum only deflashing), suitable for special applications only. mid-sized batches > fast throughput times > E40
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This small sized computer controlled deflashing machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. Alternatively the E30 is available with quick-exchange basket system. This basket is compatible to our high-pressure washing machine W30 and furthermore optimally suited for a linear in-line-processing →production →deflashing →washing →termpering, as this charge-baskets may be used compatible for each machine. For industry 4.0 demands, the E30 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This machine offers high-efficient removal of production-related elastomer residues on metal and thermo/duroplatstic parts – without using chemicals. With its small footprint, the compact machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The T10 is, like any of our machines, designed for high performance at low consumption of nitrogen and electric energy. The machine is especially designed for smaller batch needs. This machine will be manufactured individually in accordance to the costomer needs!
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Elastomeric wipers/scrapers are used in combination with the MANOY® sliding ring, the MANOY® U‑Cup or other rod seals.
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) •
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer
Request for a quoteHAAG + ZEISSLER MASCHINENELEMENTE GMBH
Germany
universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring graphite bushbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 12,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 175 °C air 190 °C steam 300 °C water heat transfer oil SPEED MAXIMUM 700 1/min ISO 228 thread 700 1/min NPT thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")
Request for a quoteFRANKE GMBH
Germany
Elastomer sleeves are available on request for Franke LSA slim bearings. They are used for tolerance compensation and for vibration decoupling. The smooth running can be significantly increased by an elastomer sleeve. Elastomer sleeves for the LSA 6/8 also offer additional sealing of the bearing due to the overlapping of the edges. Elastomer sleeves for Franke slim bearings are available from stock. They can be ordered when you buy a slim bearing and are then included in the delivery. For series production, elastomer sleeves are available by the meter for self-cutting. We recommend gluing the ends with cyanoacrylate glue (e.g. Loctite 406). The use of the elastomer sleeve slightly reduces the stiffness and accuracy of the bearing. The basic static load rating of the bearing also decreases slightly. We would be happy to advise you on the design and construction.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For the lubrication of plastic/plastic and plastic/metal combinations, e.g. single-serving taps in the food industry or for beverage can holders in the automotive industry Silicone-free alternative for the lubrication of O-rings and sealings during assembly Advantages and benefits Good compatibility to plastics Constant properties without drying, hardening or bleeding Tested for beer foam compatibility NSF H1 registered MOSH/MOAH-free Silicone-free
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Silicone-free alternative for the lubrication of O-rings and sealings during assembly. Lubrication of plastic parts such as gears, sliding surfaces, etc. Advantages and benefits Excellent adhesion on plastics and metals Tasteless and odourless Consistent properties without drying out, hardening or bleeding NSF H1 registered Compatible with plastics (see table) MOSH/MOAH-free Silicone-free
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This machine offers high efficiency cleaning of medial & technical elastomers and is construed for mid sized bach demands. The W40 is, like any of our machines, designed for high performance with economic efficiency. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. For industry 4.0 demands, the W40 is best prepared. On option, the control of the machine via OPC-UA server can be installed additionally. By special request, siliconisation of rubber parts or coating with other glide agents is additionally possible. The W40 is the optimal solution for mid-sized batch demands at high througput!
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
cryogenic decoating of big-sized parts Take advantage from our experience! We offer customized solutions for: ■ decoating of big-sized parts (e.g. vulcanized metal housings, tools, etc) ■ devices for metal shringking-work The individuel customized solution will be performed according to customer specification!
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This small-sized machine can be integrated into the production line easily. This safes temporary storage or extra transports and finally corresponding time loss and costs. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. By special request, siliconisation or coating with other glide agents is also possible. The W30 uses exchangeable bastekts for the (un)loading. These baskets are also compatible to our cryogenic deflashing machine E30W, and furthermore, optimally suited for a linear in-line processing → production → deflashing → washing → postcure tempering, The W30 is best pepared for industrie 4.0 demands. (on option with OPC UA server) With this small-sized machine, your treatment capacity is at best cost-performance ratio!
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This machine offers high-efficient removal of production-related elastomer residues on metal and thermo/duroplatstic parts – without using chemicals. The T30 is, like any of our machines, designed for high performance at low consumption of nitrogen and electric energy. The machine is especially designed for mid to high batch needs. This machine will be manufactured individually in accordance to the costomer needs!
Request for a quotePOLYNEO GMBH
Germany
The segment Performance Additives was established with the intention of offering our customers from the plastics industry an extensive and exclusive product portfolio. This product portfolio comprises a wide range of high-performance additives for various plastics. Fine-tuned to individual customer needs we deliver different additives, catalysts und colorants to PET producers.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.
Request for a quoteEFFBE GMBH
Germany
Our excellent reputation motivates us to tackle new challenges every day With the qualities EFFBE 295 and EFFBE Urelast®, EFFBE sets new standards in the service life and settling behavior of elastomer springs. Our elastomer springs stand for many years of permanently elastic and unbreakable use, for example in cutting and punching tools. Our customers around the world appreciate the quality of the EFFBE product ranges, which also offer a favorable price-performance ratio and high cost-effectiveness due to zero maintenance. Awareness of our excellent reputation motivates us to tackle new challenges every day. That's why our engineers and designers develop customized parts for you, if our standard ranges are unable to solve your problem. Elastomer compression springs are regulated by the standard DIN ISO 10069-1. Our qualities EFFBE 295 and EFFBE Urelast® meet this DIN standard and even surpass it in terms of service life and settling behavior.
Request for a quoteIBK WIESEHAHN GMBH
Germany
Elastomers are macro-molecular, organic substances with little cross-linked structure. As a result, they do not melt, are insoluble, partly subject to swelling and are elastic. Elastomers are based on rubber which is processed into various kinds of synthetic rubber, depending on the monomer. The various kinds of synchetic rubberdiffer slightlys in their properties so that they are used for different applications with regard to temperature, hardness, elasticity etc. In addition to generally common mouldings such as Orings, our delivery range also includes customized mouldedarticles, profi le cords, punched or cut seals manufactured to specifi cations or to drawings, plates or rollers. Elastomer materials: - NBR - EPDM - CR - CSM - FPM - VQM - NR - EPDM
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
Roller chains with elastomer profiles are ideal for applicationswhere fragile goods require gentle conveyor handling. ELITE chains are used for transporting goods that should not be scratched, such as coated or thin sheet metal, planed timber planks or pipes. The material iwis uses for the ELITE product range is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A. NBR offers the optimum combination of cohesive friction, abrasion resistance and durability. Other profile types are possible for special applications and can be supplied on request. ELITE highlights: • All ELITE chain plates 1 are tapered and shot-blasted; production processes such as fine blanking and ball-drifting ensure a particularly high contact ratio • Seamless, cold-extruded, shot-blasted rollers 2 with extremely regular wall thickness • The standard rubber profile 3 is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A.
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• stainless steel version • easy to assemble clamping hub • plug-in, backlash-free and vibration dampening • torque range: 8 - 500 Nm • shaft diameter: 8 - 55 mm
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• easy to install clampin ring hub • elastomer attachment with conical clamping hub for small shaft diameters • plug in, blind assembly possible • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameter: D1= 9 - 60 mm / D2= 6 - 100 mm
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• with radial clamping hub on both sides • easy to install - plug in design • compensation of shaft misalignments - oscillation dampening • Torque range: 0,5 - 2.000 Nm • Shaft diameter: D1= 4 - 90 mm / D2= 5 - 100 mm
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• radial clamping hub on both sides • cost-effective, very short design, standard series • plug in, backlash free, oscillation dampening • Torque range: 8 - 2.000 Nm • Shaft diameter: 8 - 90 mm
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• conical clamping hub on both sides • rotary symetric design - high speed • plug-in, backlash free, oscillation dampening • Torque range: 10 - 2.000 Nm • Shaft diameter: 6 - 85 mm
Request for a quoteResults for
Elastomers - Import exportNumber of results
38 ProductsCountries
Company type
Category