Door seals - Import export

Door seals, Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive, save energy, draft excluder ideal as sound insulation, cold protection door seals Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive (save energy - quick and easy to install) door draft excluder ideal also as Sound insulation, information about this article IDEAL PROTECTION FROM DRAFT - Our door seals are perfect as draft stoppers. The Vellure door draft excluder / door strip is self-adhesive. The problem with drafts is now history forever. SAVE ENERGY - Our draft excluders and door seals are perfect as cold stoppers and effectively eliminate thermal bridges, saving you money. The draft excluder for doors is also ideal as sound insulation! INSTALLED IN UNDER 1 MINUTE - Simply clean the surface of the door, peel off the adhesive strip and stick the door seal at the bottom. If necessary, simply

Seals, Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive (energy saving door draft excluder ideal as sound insulation, cold protection (white) seals, IDEAL PROTECTION FROM DRAFTS - Our door seals are perfect as draft excluders. The door draft excluder / door strip from Vellure is self-adhesive. The problem with drafts is now history forever. SAVE ENERGY - Our draft excluders and door seals are perfect as cold stoppers and effectively eliminate thermal bridges, so you save money. The draft excluder for doors is also ideal as sound insulation! IN UNDER 1 . MINUTE ATTACHED - Simply clean the surface of the door, peel off the adhesive strip and stick the door seal on the bottom. Simply cut off the protruding door seal if necessary. Quick & easy! PERFECT FOR ANY SURFACE - Our special adhesive is suitable for any surface. The advantages are the bombproof hold & easy to remove again as needed. In addition, the draft stopper for doors is very gentle

Shower door seals, shower door seal UNIVERSAL LENGTH - Our shower sealing lip is suitable for doors up to 1m in length. Shower door seals, PERFECT FIT - The Vellure shower seal 6mm shower seal is available in 2 sizes. For glass thicknesses of 6mm and 8mm. These therefore fit perfectly and are easy to attach. UNIVERSAL LENGTH - Our shower sealing lip is suitable for doors up to 1m long. It can be easily cut to size and therefore fits perfectly into almost any shower door. Shower cubicle seal. 100% TIGHT - The shower lip seal for shower doors made of high-quality PVC is absolutely tight. Thanks to the pearling effect, the rubber seal optimally repels water from the shower seal glass door. EASY OPENING & CLOSING - Thanks to the soft rubber lip, the shower door opens and closes by itself. The shower lip seal seals a door gap of up to 1.2 cm. QUALITY PROMISE - Our shower seals are absolutely durable and look like new for a very long time. As a German premium

Fast delivery of spare and wear parts We have a modern shelf stock of all common wear and spare parts. The delivery guarantee from our own stock is a matter of course for us - as well as for older machines and third-party products. ▪ Blasting gloves/sandblasting gloves ▪ Blasting nozzles/sandblasting nozzles ▪ Clamps ▪ Vent valves ▪ Laminated glass panes ▪ Profile seals ▪ Illumination panes ▪ Filter cartridges ▪ Replacement diaphragms ▪ Sealing rings ▪ Nozzle holder ▪ Blasting hoses/sandblasting hoses ▪ Door seals ▪ Air nozzles ▪ Check valves ▪ Sinter filters ▪ Metering rings ▪ baffle discs and much more.

Our modular cupboard trolley is specifically designed for use with ISO baskets. You can freely select the configuration and fittings to match your individual requirements. The modular system’s reliability and ease of handling allows you to rationalise logistic processes. The cupboard trolley can be configured according to your precise needs. Our anodised cupboard trolley for ISO baskets impresses with its ease of handling and cleaning, durability, variability, ergonomic perfection and first-class quality and complies with hygiene requirements. Doors rotate up to 270 degrees Magnets on ends hold doors open for interference free access Easy to use cylindrical twist lock Door seals keep out dirt and moisture Seamless interior design allows easy cleaning Push and pull handles on each end Protective top and bottom bumpers Removable shelves and runners Document frame DIN A 4 inside of door and DIN A 7 on exterior end Torsion proof BiTubAl® chassis 2 Fixed and 2 swivelling castors –...

Our modular cupboard trolley is specifically designed for use with ISO baskets. You can freely select the configuration and fittings to match your individual requirements. The modular system’s reliability and ease of handling allows you to rationalise logistic processes. The cupboard trolley can be configured according to your precise needs. Our anodised cupboard trolley for ISO baskets impresses with its ease of handling and cleaning, durability, variability, ergonomic perfection and first-class quality and complies with hygiene requirements. Doors rotate up to 270 degrees Magnets on ends hold doors open for interference free access Easy to use cylindrical twist lock Door seals keep out dirt and moisture Seamless interior design allows easy cleaning Push and pull handles on each end Protective top and bottom bumpers Removable shelves and runners Document frame DIN A 4 inside of door and DIN A 7 on exterior end Torsion proof BiTubAl® chassis 2 Fixed and 2 swivelling castors –...

High elasticity and volume are the premises for an extremely good insulation effect Resistant against acid and caustic except phosphoric or hydrofluoric acid or highly concentrated caustics Does not content toxic substances or heavy metals Non flammable following DIN 4102 Product availability: Square, rectangular, round braid or round twisted reinforced with chrome steel wire Surface graphite impregnation on request for increasing compactness and nonstick effect Product contains approx. 20 % organic carrierfiber which decomposes at 200 °C. Technical parameters pH 1 - 13 Temperature: t = -100 … +1100 °C Main application Furnace, boiler, vessel and chimney doors Fireplaces Pressureless service closures Tunnel furnaces Boiler and vessel doors Lid seals etc. Suitable for Power plant Furnace construction Variants Square, rectangular, round braid or round twisted reinforced with chrome steel wire On request with surface graphite impregnation...

PTFE-fiber with PTFE Impregnation and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Tank lid, door and lid seal Suitable for Static applications Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

Braid of Flexible Expanded Natural Graphite Tape Reinforced with Inconel Wire Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use valve packing Expanded graphite of higher quality Coefficient of expansion similar to steel For valve applications rings should be approx. 20 - 25 % compressed at installation Precompressed rings are recommended Operating range Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.20 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Power plant technology Petrochemical plants Boiler houses High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special...

Braid of Flexible Expanded Natural Graphite Tape Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use in pumps and valves Very good dry-running characteristics No wear, perfect thermal conductivity High quality pure graphite Coefficient of thermal expansion similar to steel Rings should be approx. 20 - 25 % compressed during assembly Recommended as die formed rings Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses Petrochemical plants High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3...

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...

100 % PTFE Fiber with Unique Blocking Agent Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Very low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustment Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.65 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry General Industry Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections is...

Black Powder Coated or Chrome Plated Zinc Alloy Latch,with Adjustable Grip,Suitable for Ts= 1-11mm Panel,Door Cutout: 71*25mm and 91*35mm ,Easy Installation.ROHS compliance.

Due to their efficient processing, high performance and recyclability, Dryflex TPE compounds have proved themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion have further enhanced the design possibilities. We develop custom formulated materials which deal with the design, performance and environmental needs of the future. Dryflex TPEs are totally recyclable and can be reprocessed and regenerated to produce functional gasket products. We have developed trade standard grades, including compounds developed to meet the requirements of BS 7412:2002 Class A or B standard and are suitable for ‘static’ (Class A) or ‘dynamic’ (Class B) applications. As well as grades that meet the requirements of RAL GZ 716/1, Class IV (and Class V) standard. Our Dryflex Extrusion range also includes translucent, foamable, rigid and semi-rigid compounds. Download the Dryflex Extrusion Profiles Product Guide

Profiles for the furniture industry, such as guide rails for furniture with sliding doors, brush seal profiles and brackets as screens. Made mainly from ABS, PVC and PS, each in one colour. Equipped with brush seals, for example, and adhesive tape for fixing. Additional fixing options include screwing, clamping and bolting.

Design features: solid construction Longitudinal sealing Main shaft drive frequency-controlled three-phase drive Paper cutting knife Film removal control Product insertion control intermittent product delivery clocked forehead sealing frameless protective doors made of 15mm Makrolon PLC control Additional devices: Tear-off thread with tip cut Photoelectric print control Marking printing devices Coding (inkjet / laser) two film rolls automatic reel change Brochure and sample inserts external control devices Vibration equalization for granular contents Roller and belt leveler for powdery products Height sensing and ejection station for container completeness control Processing of heat sealable paper Discharge stack and turning device full-surface, double-sided face sealing oversized film roll Servo drives Machine mobile