Results for
IGUS® GMBH
Germany
drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is very light and is suitable for the simultaneous conducting of supply cables. The mounting options are highly variable, among others, using slot nuts; installation size 20 can also combined with all 20/20 aluminium construction profiles. 1. Profile made of hard-anodized aluminum 2. Main body of the carriage made of aluminum 3. Customized clearance adjustment 4. Cover made of solid plastic 5. Gliding elements in high-performance polymer iglidur® J serve as a guide bearing and guarantee optimum running properties drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis
Request for a quotePAULY STAHLHANDEL RALPH PAULY E.K.
Germany
Weight 5 kg Dimensions 18212724.7 cm
Request for a quotePAULY STAHLHANDEL RALPH PAULY E.K.
Germany
Weight 131 kg Dimensions .95-110251650 cm
Request for a quoteWAELAG WÄLZLAGER VERTRIEBS- GMBH
Germany
WBK06-01A Fixed support side support unit (square type) - Bearing Bore diameter 6 mm.
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: square tube Material: EN AW-6060 (AlMgSi0,5), 3.3206 Condition: solution annealed, artificially aged Type of production: pressed Surface finish: anodised Standard: EN 755 eClass 9.1: 35020190 UNSPSC 11.2: 30102306 Dimensions: Thickness (mm): 2 - 3 Length (mm): 6,000 Edge length (mm): 25 - 30 RAL colour: E6 anodize EV1
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: Square tube, round edged Material: EN AW-6060 (AlMgSi0,5), 3.3206 Type of production: pressed Condition: solution annealed, artificially aged Surface finish: mill-finish Standard: EN 755 eClass 9.1: 35020190 UNSPSC 11.2: 30102306 Dimensions: Thickness (mm): 2 - 4 Length (mm): 6,000 Edge length (mm): 30 - 80 Radius (mm): 2 - 6
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: square perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 Length (mm): 2,000 Width (mm): 1,000 Hole size: 10 Pitch (hole center measured): 15
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: Square Material: EN AW-6060 (AlMgSi0,5), 3.3206 Type of production: pressed Condition: solution annealed, artificially aged Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020303 UNSPSC 11.2: 30102406 Dimensions: Edge length (mm): 8 - 60 Length (mm): 6,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: Square Material: EN AW-2007 (AlCuMgPb), 3.1645 Type of manufacture: drawn Condition: T3 acc. to EN 515 Standard: EN 573/EN 485 eClass 9.1: 35020303 UNSPSC 11.2: 30102406 Dimensions: Edge length (mm): 15 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: Square Material: EN AW-2007 (AlCuMgPb), 3.1645 Type of manufacture: drawn Condition: T4 acc. to EN 515 Standard: EN 573-3 eClass 9.1: 35020303 UNSPSC 11.2: 30102406 Dimensions: Edge length (mm): 20 - 120 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: square Material: C45 (1.0503) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010303 UNSPSC 11.2: 30102404 Dimensions: Length (mm): 3,000 Edge length (mm): 20 - 50
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: square Material: S235JR (1.0122) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010303 UNSPSC 11.2: 30102404 Dimensions: Length (mm): 3,000 - 6,000 Edge length (mm): 8 - 120
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: square Material: EN AW-6082 (AlMgSi1), 3.2315 Manufacturing method: pressed Condition: T6 acc. to EN 515 Norm: EN 573/EN 485 eClass 9.1: 35020303 UNSPSC 11.2: 30102406 Dimensions: Edge length (mm): 15 - 120 Length (mm): 3,000
Request for a quoteDEMAREIS GMBH
Germany
These bottles are specially used in the chemical industry. We deliver this kind of bottles with temper evident closures in wide and narrow neck. From 100 ml until 1.000 ml
Request for a quoteDEMAREIS GMBH
Germany
These jars are made of HDPE and due to their large openings are perfectly suitable for cleanly removing the product. Available in sizes from 100 ml until 2.500 ml
Request for a quoteResults for
Squares - Import exportNumber of results
16 ProductsCountries
Company type