Results for
CIC - KLAUS CZERWONKA
Germany
Turned spindles, axles, shafts. Pistons for pneumatics, hydraulics, pumps. Ground, hardened, polished, chrome-plated.
Request for a quoteIGUS® GMBH
Germany
DryLin® R shafts and supported shafts - Technical data DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM Aluminum Low weight Lower wear of the plain bearing Corrosion resistant Ideal in combination with liners made of iglidur® J/J 200 Delivered off the shelf Steel Low-priced standard High load capacity Application in dry area Hard chrome-plated also available Lower coefficient of friction against plastic bearing Stainless steel High corrosion-resistance High resistance to chemicals Ideal solution for the wet area V4A for extreme chemical intensive applications Female thread, axial male thread Pins Groove cut-in Spanner flat Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We'll submit an offer to you in a short time. Shaft request
Request for a quoteIGUS® GMBH
Germany
iglidur® J260: ideal for plastic shafts Time and again the iglidur® J260 material proves its worth where the maximum service life and best friction coefficients are required under special application conditions - particularly in connection with plastic shafts! iglidur® J260 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Very good c.o.f. for low or medium loads Higher temperature resistance than iglidur® J Longer life time - even on polymer shafts
Request for a quoteHONSEL-GROUP
Germany
Blind rivet nuts with continuous hexagonal (Hexaform) or partial hexagonal shank (Hexatop) are another possibility to avoid the rotation of the fastener in the component as alternative to knurled shafts. Especially with coated components or when using tools smaller working stroke you can achieve excellent results.
Request for a quoteHONSEL-GROUP
Germany
Blind rivet nuts with continuous hexagonal (Hexaform) or partial hexagonal shank (Hexatop) are another possibility to avoid the rotation of the fastener in the component as alternative to knurled shafts. Especially with coated components or when using tools smaller working stroke you can achieve excellent results.
Request for a quoteCASTSERVICE GMBH
Germany
Charging racks and installations parts for shaft furnaces and top hat furnaces Universal charging aids for the grafting of drive wheels, crown wheels and bevel wheels The various requirements in all kind of heat treatment processes will be met with high quality and long living products. In addition to our standard systems we are able to offer individual concepts that are specially designed for your demands. Furthermore, we could support you in choosing applicable material grades as well as developing charging devices. The design of new systems is the day-to-day business of our own Engineering-dept.
Request for a quoteSMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSU-16-600, with drills in high-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type Ø d h +/- 0,15 H1 A A1 W M Ød1 e T weight./kg* SMTSU-16-600 16 18 3 14 7,0 7,0 M5 5,5 16,0 75 0,56 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 16-T2-600, with drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-T2-600 16 45 26 5 9,5 6,0 5,5 5,5 7,0 50 33 150 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 16-T1-600, with drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) src="images/Skizze%20SMTSN.JPG" /> Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-T1-600 16 45 26 5 9,5 6,0 5,5 5,5 7,0 50 33 100 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 16-G1-600, without drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-G1-600-UG 16 45 26 5 9,5 6,0 7,0 50 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSU-12-600, with drills in high-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type Ø d h +/- 0,15 H1 A A1 W M Ød1 e T weight./kg* SMTSU-12-600 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 12-T2-600, with drills in high-quality +/- 0,02mm from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-T2-600 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 12-T1-600, with drills in high-quality +/- 0,02mm from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-T1-600 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail SMTSN 12-G1-600-UG, without drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-G1-600-UG 12 40 22 5 8,0 5,0 5,8 50 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Abmessungen: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew./kg* SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Dimensions: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew kg SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
Do you sell or make similar products?
Sign up to europages and have your products listed
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, here choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-WSB-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X90CrMoV18, hardened 55-59 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-WSB-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in X90CrMoV18 Article: SMGWH-16-WSB-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: X90CrMoV18 (1.4112) hardened: 55-59 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-WKB-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X46Cr13, hardened 52-56 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-WKB-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in X46Cr13 Article: SMGWH-16-WKB-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: X46Cr13 (1.4034) hardened: 52-56 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-W-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in Cf53, hardened 59-65 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-W-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in Cf53 Article: SMGWH-16-W-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-12-WV-2GC12-KHPP Application: Linear guides, for example milling machines Size: shaft 12mm, chrome plated, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in Cf53, hardened 59-65 HRC, Eht min. 0,6mm, grounded in h7 (0 / -18my) Housing unit: 2 pcs SMGC-12-KHPP Shaft support block: 2 pcs. SMGWH-12 Shaft support block unit Type SMGWH-12-WV-2GC12-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-12-KHPP and 2x SMGWH-12, with hardened shaft in Cf53 Article: SMGWH-12-WV-GC12-KHPP unit-data components: 1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,6 grounded tol. h7 (0-18my) chrome plated appr. 10my length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 0,89kg/m straightness: 0,3mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-12-KHPP 12 19 33 17 40 28 14 29 11 16 4,3 M5 0,09 3.) Shaft support block SMGWH-12 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-12 12 40 18 33 19 27 5,2 10 M6 13 16 0,05 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-12-WSB-2GC12-KHPP Application: Linear guides, for example milling machines Size: shaft 12mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X90CrMoV18, hardened 55-59 HRC, Eht min. 0,6mm, grounded in h6 (0 / -13my) Housing unit: 2 pcs SMGC-12-KHPP Shaft support block: 2 pcs. SMGWH-12 Shaft support block unit Type SMGWH-12-WSB-2GC12-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-12-KHPP and 2x SMGWH-12, with hardened shaft in X90CrMoV18 Article: SMGWH-12-WSB-GC12-KHPP unit-data components: 1.) Shaft (1x): quality: X90CrMoV18 (1.4112) hardened: 55-59 HRC Rht min.0,6 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 0,89kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-12-KHPP 12 19 33 17 40 28 14 29 11 16 4,3 M5 0,09 3.) Shaft support block SMGWH-12 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-12 12 40 18 33 19 27 5,2 10 M6 13 16 0,05 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-12-WKB-2GC12-KHPP Application: Linear guides, for example milling machines Size: shaft 12mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X46Cr13, hardened 52-56 HRC, Eht min. 0,6mm, grounded in h6 (0 / -13my) Housing unit: 2 pcs SMGC-12-KHPP Shaft support block: 2 pcs. SMGWH-12 Shaft support block unit Type SMGWH-12-WKB-2GC12-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-12-KHPP and 2x SMGWH-12, with hardened shaft in X46Cr13 Article: SMGWH-12-WKB-GC12-KHPP unit-data components: 1.) Shaft (1x): quality: X46Cr13 (1.4034) hardened: 52-56 HRC Rht min.0,6 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 0,89kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-12-KHPP 12 19 33 17 40 28 14 29 11 16 4,3 M5 0,09 3.) Shaft support block SMGWH-12 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-12 12 40 18 33 19 27 5,2 10 M6 13 16 0,05 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-12-W-2GC12-KHPP Application: Linear guides, for example milling machines Size: shaft 12mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in Cf53, hardened 59-65 HRC, Eht min. 0,6mm, grounded in h6 (0 / -13my) Housing unit: 2 pcs SMGC-12-KHPP Shaft support block: 2 pcs. SMGWH-12 Shaft support block unit Type SMGWH-12-W-2GC12-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-12-KHPP and 2x SMGWH-12, with hardened shaft in Cf53 Article: SMGWH-12-W-GC12-KHPP unit-data components: 1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,6 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 0,89kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-12-KHPP 12 19 33 17 40 28 14 29 11 16 4,3 M5 0,09 3.) Shaft support block SMGWH-12 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-12 12 40 18 33 19 27 5,2 10 M6 13 16 0,05 We delivered the components unmounted, the linear ball bearing will be greased Please ive us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge
Results for
Shafts - Import exportNumber of results
34 ProductsCountries
Company type