Results for
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Hazardous area „L" immersion heater ATEX EEx e + EEx d T1 – T6 The “ISES-L” and “FP/BFP-L” series of hazardous area immersion heaters are ideally suited for installation within process tanks, sited in zone 1 or 2 hazardous areas. The design of the heater provides horizontal mounting of the elements, beneficial for low liquid level applications but allowing vertical installation which facilitates withdrawal from the vessel top. This design of heater is particularly for heating for heating the contents of underground storage tanks.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 The Exheat „RFA-C” range of flameproof removable core heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust EEx d terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Immersion heater ATEX II 2 G Ex d IIC T3 – T6 ATEX EN60079-0 und EN60079-1 The Exheat „RFA” range of flameproof rod-type immersion heaters is suitable for installation in process tanks, safety showers, engine sumps, pressure vessels and similar plant, located in zone 1 and 2 Hazardous Areas where flammable atmosphere is a group IIA, IIB or IIC gas. They are suitable for heating all process liquids or gases which are non-corrosive to the materials of construction.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Core Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 ATEX IECEx zertifiziert The EXHEAT® ‘FP-C’ Range of flameproof core immersion heaters offers a Hazardous Area heating solution for oil and similar applications where a low heat density is required. The special element/sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The number of element cores fitted depends upon the media to be heated and the kilowatt rating required.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical flange type immersion heaters The series of electrical Flange Type FHK-L provides a solution for the heating of liquids / molten salts or similar applications in process tanks or underground tanks. It can also be tank filling levels with very low heat, since only the lower horizontal portion is heated. The flange heater consists of a number of heating elements, which are built into the process flange. The electrical wiring is done in a robust electrical terminal box.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
EEx’e‘ certified immersion heater EEx e T1 – T6 ATEX The “FHK-Exe” type electric immersion heaters are EExe certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The range of immersion heaters type FHK-Exe offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust Ex’e’ terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Immersion heater with cores The range of core immersion heaters type FHK-P offers a heating solution for liquid media where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of core elements fitted into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical flange type immersion heaters The range of immersion heaters type FHK offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.
Request for a quoteResults for
Immersion heater - Import exportNumber of results
10 ProductsCompany type
Category