Data recorder - Import export

Milling of complex components for automotive and mechanical engineering. Production of prototypes, test parts, small and large series according to data records, drawings, samples or specifications. Machining of cast and forged blanks. Attachment of decorative surfaces.

Digital Power Tool Tester with Pulse Counter Management of tightening screws begins on checking fastening tools. YET testers are designed for high precision torque control of mainly impulse type tightening tools. Also usable for angle nutrunners, screw drivers, ratchet wrenches etc. However impact wrenches can be tested also, you should not exceed approx. 2/3 of the testers rated capacity. Install the YET torque tester in a tool maintenance shop, test laboratory, or at production lines for effective control of fastening such as acceptance inspection, periodical check and torque adjustment. YET torque testers feature a parallel centronics printer port and a serial RS-232C computer interface enabling simultaneous protocol as well as external data recording. Key Features: High accuracy within R.O. ± 0.5 % (stat. Load) Large digital display (LED) Measuring time can be set by every 0.1 sec within 9.9 sec. Shut-off time can be set 1-2-3 sec.

The WrenchStar Multi digitally records torque & angle data and connects either wirelessly or with a cable option, to our IQVu data collector. The WrenchStar Multi has a 360° Light Ring that is completely visible at any angle. The torque wrench can be used wirelessly or with a cable option. It has a small OLED display that is clear and bright and shows how many Jobs are left. There is also a strong vibration alert when reaching the desired torque level. The Wrench will connect wirelessly using RF to the IQVu. If the Wrench goes out of range then it will continue to take readings, which once you are back in range it will automatically connect to the IQVu and send the data. The WrenchStar Multi can store around 200 readings within its internal storage so you can continue to work offline before having to return to the IQvu to send your Jobs. The quick change battery allows less downtime in production.

, process monitor with internet access Name: guest, password: 2001. After the login: In the lower left corner of the sub network follow the hyperlink "WebAlert" and log in again using the same access data. WebAlert enables you to access your equipment – from any PC, wherever you are! The system integrates seamlessly into the existing equipment. It continuously collects the process data and intelligently distributes them via various media like inter- and intranet, cellphone or fax. In doing so, it supports all global communication standards: USB interface for the local notebook, Ethernet for LAN communication, Internal analog modem or Internal cellular modem (GPRS). During off-limit conditions, in the event of a breakdown or need for maintenance, the system automatically sends messages to the responsible engineers. The data logger records round-the-clock all measured data which can be manually recalled or automatically sent by e-mail in predefined intervals. The administration has

, the controller with internet access Name: guest, Password: 2001 WebMasterONE unites the main requirements to a modern water management, namely measuring, recording remote monitoring and of course regulating in one single device. The system records the data and distributes them intelligently about different media such as inter- and intranet, mobile phone or fax. It supports all global communication standards: USB interface for the local computer (standard), Ethernet for local area network communication (standard), internal analogue modem or internal cellular modem (CDMA, GPRS, GSM) compatible with most providers of mobile telecom services. In case of breakdown or violations of limiting values the system automatically sends out messages by phone, fax or email. All readings are recorded round-the-clock and can be requested to be sent via e-mail either manually or automatically in adjustable cycles. The administrative department has permanently insight into current readings, tot

With the simple, handy and robust single gas monitor GasAlertExtreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. A broaden range of user options as multilingual display, data recording function and the comprehensive range of models for toxic gases make the device to an ideal solution for many areas of application. Features of GasAlertExtreme: Permanent displays of measurement values in real-time (LCD display) Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Impact- and water-resistant Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Setting of various languages (German, English, French, Spanish, Portuguese) Technical data of GasAlertExtreme: Dimension (cm): 2.8 x 5.0 x 9.5 Weight (g): 82 Application temperature: -20 + 50...

Scott Protégé ZM is maintenance-free, user-friendly and a reliable gas measurement device. Once the Protégé is activated neither further charging nor calibration is necessary! During the run time of 2 years the device measures oxygen, carbon monoxide or hydrogen sulphide. Maintenance-free Oxygen, carbon monoxide, or hydrogen sulphide In order to extend battery operation time, after measurements power save modus turns on Triple- warning device with optical, acoustic and vibration alarm signals LC-display can be customized and it indicates remaining device runtime, gas measured values in real-time or both Alarm thresholds as well as deadlines for inspection and calibration are configured by the user itself Function for data recording Complies with protection class IP66/67 (certified by an independent institute) Optional expandable by testing facility with 4 equipment pockets and programming device for IR- interface Data sheet

The FAN ci2 is a highly sensitive analysis instrument for the determination of the ratio of the stable isotope 13C and 12C in the CO 2 of respiratory gases. The field of application for the device are all diagnosis techniques in which tracer substances marked with the 13C stable isotope are catabolized and finally expelled through respiration. The 13C breath test analyzer FAN ci2 can be equipped with a highly stable dual beam infrared spectrometer module. So this device with its 8 or 16 ports is suitable both for medical routine diagnostics and for long term measurements with high demands for precision and stability. The included FANci–software for measuring and interpretation supports all current operating systems of the connected PC. You are free to select from more than 20 integrated breath tests, e.g. Helicobacter pylori test, liver function test, or measuring intestinal transit time. FAN ci2 is the ideal device for physicians’ office laboratories as well as for scientific institutes. Special features simple and save handling small sample volume (approx. 100ml) high performance (approx. 30 samples/h) high repeatability (standard deviation < 0.5‰) low servicing by internal checks of system status wide field of application by flexible adaptation to special questions Fields of application Medicine diagnostic studies for Helicobacter–gastritis investigation of aminoacid metabolism monitoring the circulation of bile acid detection of fat malabsorption indication of bacterial overgrowth in the jejunum specific liver function tests measurement of gastric emptying rate of solids determination of the lactase activity with 13C labeled cornstarch test of the pancreas function with the lipase enzyme Animal nutrition and biochemistry utilisation of feedstuff dynamics of metabolism Operating principle The principle of measurement is based upon the specific absorption of infrared light in the middle of the infrared spectrum between 2 and 8µm wave length (NDIR: Non Dispersive Infrared Spectroscopy). The high selectivity of the infrared detectors is obtained by filling themselves with the corresponding components, 13CO 2 and 12CO 2 respectively. The cross sensitivity of 13CO 2 to the high 12CO 2 concentrations is reduced by using a 12CO 2 gas filter in the 13CO 2 channel and mathematical hods. To yield the high accuracy the temperature is stabilized by thermostat and the system is closed to the environment. Software The control of the FAN ci2 is realized by the FANci WINDOWS®–software that guarantees an easy handling of the analyzer system and a clearly arranged representation of the results of measurements. So the user is informed about the progress of the measurements at any time. All controls needed for the routine procedures of the FAN ci2, as recording of sample data, start of measurement, evaluation and documentation of the results are easy available. All relevant system parameters are observed continuously and any disturbances in the process reported immediately. By selecting only a few system parameters, the FAN ci2 is adaptable to different questions. Via standard data interfaces like GDT, HL7 or ASTM the software can be connected to practise or hospital EDP systems easily. System configuration The FAN ci2 only consists of one unit that includes the acquisition unit and the gas management system. The gas sample–ports for the breath bags are located in front of the device. There are only two connections necessary: the power supply and the connection to the Personal Computer. The software communicate with the components of the device via USB. Simple and secure handling by in the hardware integrated sample recognition system compact design and neat layout of controls internal control with fail-save CAN bus heated gas path to eliminate residual moisture low stoppage times and service costs by internal status checks for early failure diagnosis Optical system with integrated thermostat, optimized for the measuring process new efficient IR–sources modified light modulation, optimized to the signal processing and, due to this markedly smoother output signal with lower drift insensitive to nuisance gases by higher selectivity