Results for
KLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005 (AlMg1), H14 Type of manufacture: rolled Condition: work-hardened, 1/2 hard Surface finish: Eloxal quality, Alfha1 Standard: EN 573 Dimensions: Thickness (mm): 1.5 - 4 Length (mm): 2,000 - 5,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-2017 (AlCuMg1), 3.1325, T451 Type of manufacture: rolled Condition: solution annealed, cold aged Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 - 3 Length (mm): 2,000 Width (mm): 1,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-1050 (Al99.5), 3.0255, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000 Foliation: no foil, protective foil
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-6082 (AlMgSi1), 3.2315, T6 Type of manufacture: rolled Condition: solution annealed, artificially aged Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 - 3 Length (mm): 2,000 Width (mm): 1,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-2017 (AlCuMg1), 3.1325, T451 Type of manufacture: rolled Condition: solution annealed, stress relieved, cold aged Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 6 - 10 Length (mm): 2.000 Width (mm): 1.000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005 (AlMg1), 3.3315, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: anodized 20my silver RAL colour: E6 anodize EV1 Foil page(s): one page Standard: EN 573/EN 4858 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 4 Width (mm): 1,000 Length (mm): 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour-coated, wet paint eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.8 - 1 Length (mm): 2,000 - 3,000 Width (mm): 1,000- 1,500 RAL colours: RAL 7016 (anthracite grey), RAL 8004 (copper brown), RAL 8014 (sepia brown), RAL 9006 (white aluminium), RAL 9010 (pure white), RAL 9016 (white)
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005 (AlMg1), H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Butler finish (stainless steel look) eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.5 - 2 Length (mm): 2,500 Width (mm): 1,250
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505, H44 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour coated, powder Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 Length (mm): 2,000 - 3,000 width (mm): 1,000- 1,500 RAL colours: RAL 9016 (white)
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5754 (AlMg3), 3.3535, H111 Type of manufacture: rolled Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 6 Length (mm): 2,000 - 4,000 width (mm): 1,000 - 2,000 Foliation: no foil, protection foil, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005 (AlMg1), H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 4 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Factory filming: no film, protective film, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5754 (AlMg3), 3.3535, H22 Type of production: cold-rolled Condition: work-hardened, annealed, 1/4 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000 Foliation: no foil, protection foil, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-1050 (Al99.5), 3.0255, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface texture: Stucco patterned Standard: EN 573/EN 485 eClass 9.1: 35020502 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.8 - 1 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5083 (AlMg4,5Mn), 3.3547, H111 Type of manufacture: rolled Condition: annealed, slightly work-hardened Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 - 10 Width (mm): 1,000 - 1,500 Length (mm): 2,000 - 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005 (AlMg1), H12 Type of manufacture: rolled Condition: work-hardened, 1/4 hard Surface finish: decorative anodised quality Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505, H44 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour coated, powder, MIRAWALL Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 2 Length (mm): 2,000 - 4,000 Width (mm): 1,000- 1,500 RAL colours: DB703, RAL 7016 (Anthracite grey), RAL 8019 (Grey brown), RAL 9006 (White aluminium), RAL 9007 (Grey aluminium), RAL 9010 (Pure white), RAL 9016 (White)
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: EN AW-5005A (AlMg1), 3.3315, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: anodized 10my silver RAL colour: E6 anodize EV1, no RAL colour Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 3 Width (mm): 1,000 - 1,500 Length (mm): 2,000 - 4,000
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PANEL SELL GMBH
Germany
For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..
Request for a quotePANEL SELL GMBH
Germany
For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..
Request for a quotePANEL SELL GMBH
Germany
For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..
Request for a quotePANEL SELL GMBH
Germany
For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..
Request for a quotePANEL SELL GMBH
Germany
For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: plate Material: EN AW-5083 (AlMg4,5Mn), 3.3547 Condition: H111 Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 12 - 30 Width (mm): 1,000 - 1,500 Length (mm): 2,000 - 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: warted plate, duett Material: EN AW-5754 (AlMg3), 3.3535 Type of manufacture: rolled Surface finish: pickled Standard: EN 573/EN 485 eClass 9.1: 35020502 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: warted plate, quintet Material: EN AW-5754 (AlMg3), 3.3535 Type of manufacture: rolled Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020502 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 - 8 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: warted plate, duett Material: EN AW-5754 (AlMg3), 3.3535 Type of manufacture: rolled Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020502 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 - 8 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: plate Material: EN AW-2017A (AlCu4MgSi) Condition: T451 acc. to EN 515 Surface finish: Mill-finish Standard: EN 573/485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 15 - 20mm Width (mm): 1,000 Length (mm): 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: square perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 Length (mm): 2,000 Width (mm): 1,000 Hole size: 10 Pitch (hole center measured): 15
Request for a quoteResults for
Aluminium sheet - Import exportNumber of results
29 ProductsCompany type
Category