Dip painting - Import export

Immersible objects can be painted economically with the aid of dip painting. Rapid and complete wetting takes place by the immersion of the workpieces. By comparison, electrophoretic coating is more complex, but it is more advantageous in individual cases. ADP / CDP electrophoretic dip coating Electrophoretic dip coating is a modern, efficient painting method and is used extensively in industry for the coating of metals and metallised plastic surfaces. In the electrolytic coating of components using direct current, distinction is made between cathodic dip painting (CDP) and anodic dip painting (ADP), depending on the polarity. The paint film is deposited onto the object surface from an aqueous paint dispersion by the effect of a DC current. In anodic dip painting (ADP) the article being painted is connected as the anode, while in cathodic dip painting (CDP) it forms the cathode. When current flows, the paint dispersion, which contains the ionically stabilised paint particles, coagulates in the acidic boundary layer (ADP) or alkaline boundary layer (CDP) and forms a paint film, which adheres well and is hard and resistant to corrosion after hardening. Advantages:

These consists of a multitude of individual components, such as Our piping and duct systems are dimensioned and designed taking into account aspects of flow dynamics and energy. Depending on the intended purpose of use, they are manufactured from galvanised sheet steel, from thick-walled sheet steel (painted or hot-dip galvanised), from stainless steel or from plastic.

-steel construction -spray painted or hot-dip galvanized -Load capacity in kg: 360 -Dimensions (l x w x h) mm: 1020 x 100 x 450

-steel construction -spray painted or hot-dip galvanized -Load capacity (in kg): 300 -Dimensions (l x w x h) in mm: 768 x 200 x 419

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 1083 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway

-Controlled discharge of solids special manually operated scissor lock 300 x 300 mm -frame made of steel tubing -hopper made of steel plating with reinforced edging Types available Type SR -2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake, - construction height 220 mm Type SG -fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm -stacking corners Type SRE 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm Types SR-D, SG-D, SRE-D design see above but with slide closure with a special seal on the hopper floor, for manual use, opening 300x300 mm, preferred for fine-grained bulk materials -spray painted or hot-dip galvanized -Volume (approx.) in l: 375 / 600 Accessories -galvanized lid, removable

-perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm -1” drain-cock for drainage of liquids -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 -Load capacity in kg: 750 - 1500

-The stacking tipper made of distortion proof steel sheeting for heavy duty use -can be stacked when full (3 units) -is emptied by cable operated from the driver‘s seat using the traverse -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,55 / 0,7 / 0,9 / 1,5 / 2,0 -Load capacity in kg: 500 - 2000 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake -construction height 220 mm (stacking NOT possible) -galvanized 2-part lid, can be opened from one side (stacking NOT possible)

-sturdy steel sheeting construction with reinforced edging -frame made of steel tubing -welding, oil- and watertight -spring safety fastening -2 wheels + 1 swivel castor (as of volume 600 litres upwards + 2 swivel castors) made of solid rubber Ø 250 x 60 mm, one swivel castor with brake -handle Types available: -without fork sleeves (type KW) -with fork sleeves can be secured to prevent slipping and unintentional emptying -Spray painted or hot-dip galvanized -Volume (approx.) in l: 250 / 400 / 600 / 1000 -Load capacity in kg: 300 kg Accessory -galvanized lid, can be opened from both sides

-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates

-an ideal dumping angle -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 750 - 1500 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake, construction height 220 mm -galvanized lid, can be opened from both sides

-sturdy steel construction -ideally situated loading centre of gravity -can be emptied at any height by cable -operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -Surface spray painted or hot-dip galvanized -Volume (approx. in m³): 0,15 / 0,30 / 0,60 / 0,90 / 1,20 / 1,70 / 2,10 -Load capacity: 750 - 1500 kg Accessories: -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake construction height 220 mm -galvanized lid, can be opened from both sides -welding, oil- and watertight -trailer coupling and towing bar

Dip tank for long workpieces or for high piece numbers Dip tank with integrated safety sump tray and stainless steel cover (insulated). Easy to open using manually operated hoist.

The dip tank TB400 is the smallest model in our line of paint stripping systems. It is ideally suited for wheels / light-alloy rims, bicycle and motorcycle frames, painting aids or hooks. Insulated, double-walled dip tank ("vat-in-vat" system) with insulated top cover, indirect electrical heating, circulating system, and high-quality safety and monitoring technology.