Device switches - Import export

The IMX12-CCM (Cabinet Condition Monitoring) can be installed in virtually any cabinet or any protective enclosure to ontinuously check the current protection degree there - even retrospectively. The DIN rail device notifies with a switching signal improperly closed doors, as well as exceedances of temperature and interior humidity, to the control system.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

The universal two-point controller is suitable for various applications due its easy handling and robust construction. However you can also use all customary industrial probes with current or voltage output with this unit.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

By combining regular and steam smoke generators, the RATIOHYBRID makes work even more flexible In addition to variable smoke densities through the TOP device, you can also switch between steam and smouldering smoke quickly and easily. The quick production of high smoke concentrations leads to very short smoking times at a uniquely large range of possible aromas and product shades! Quick switching between smouldering and steam smoke Short smoking times Variably adjustable smoke intensity thanks to patented TOP device Diverse smoke aromas and colour nuances Highest product quality Automatic cleaning aid Can be spacesavingly retrofitted on any RATIOTOP

Desiccant dehumidifier TTR 200 The lightweight under the high-quality dehumidifiers: the extremely compact and mobile TTR 200 The TTR 200 is an extremely compact and lightweight quality dehumidifier for keeping room air continuously dry or for drying during water damage restoration. All TTR 200 are equipped with the advanced electronic Monoventic air volume regulation which allows stepless, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 200 can therefore be defined as required at any time. Even the standard model has an integrated DIN socket for remote switching to control the TTR 200 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.

It’s in a class of its own: the smallest model in the wing.line® design series. Slim, black, blue and with a removable power plug. The device is able to process a stick without a power connection. Short-term applications outside or away from the workplace are now possible. The stand (removable) enables the gun to stand safely on the worktop. Without the stand, it can be used in places that are hard to reach. The illuminated on/off switch shows at a glance whether the device is switched on. 125 watts ensure that the operating temperature is quickly reached. The mounted 3.0 mm nozzle can be replaced if desired. Smaller and larger nozzle diameters are available on request.

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS.

Because of their specifications governed by corresponding standards, these cable pull switches are used exclusively as safety command devices. These switches are available in metal enclosures as well as in insulation-enclosed versions. They are operated manually by pulling on the attached cable. The basic design of the standard rope pull switches is based on that of position switches. — Versions available in plastic and metal — With and without latching function — Max. span length: 2 x 75 meters — Protection class IP 65 according to IEC/EN 60529 — Ambient temperature -30°C to +80°

Two in one: construction hoist with 500 kg loading capacity and transport platform for 3 persons max. Very innovative is the new foldable platform and a fork take-up point is included as standard. The GEDA 300 Z/ZP lift is perfect for operation in narrow driveways and backyards as the flat cable bin is saving even more space. There are different reasons to decide in favour of the GEDA 300 Z/ZP: The usage as construction hoist or transport platform (possible by using two separate controls), safety devices (limit switches, speed dependent safety brake, overload switch-off) and the using of the GEDA UNI-MAST are only a few convincing arguments for the GEDA 300 Z/ZP.

Whether on the conveyor belt or on the machine – when maximum safety is required, BERNSTEIN rope pull switches provide a proven and reliable technical solution.The switches can be deployed flexibly, are easy to install and convenient to handle.And most importantly: they offer maximum safety when it is needed. The SR series of safety rope pull switching devices are designed and approved in accordance with the standards IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850. On actuation or in the event of cable breakage, the emergency stop switching device locks automatically and can only be reset to its initial setting by using the resetting device on the switch. • Protection class IP67 • Stable and durable plastic housing (PA 6 GV) • Can be deployed at temperatures between –25 °C and +70 °C • Flexible handling with three M20 x 1.5 cable entries • Easy installation due to the maximum connection space • Up to four positively driven NC contacts

Clear and nicely designed control centre for your entire PC or HiFi equipment. This device also perfectly serves as a work pad for your notebook or monitor. Up to 6 different devices can be switched easily and separately. 1 main switch 2-pole and 6 device switches 1-pole, all illuminated for quick and easy control. Surge and lightning protection up to 19.500 A to protect all devices connected, e.g. against indirect lightning strikes. Integrated HF-filter against high-frequency failure. Childproof sockets. In colourful display-packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Measurements: 38 x 30 x 6 cm Socket: 6 Nominal current: 16 A Interference filter: EMI/RFI USB-ports: - Plug-in system: DE

Saving energy by intelligent switching. Clear and nicely designed control centre for your entire PC or HiFi equipment. This device also perfectly serves as a work pad for your notebook or monitor. Up to 6 different devices can be switched easily and separately. 1 main switch 2-pole and 6 device switches 1-pole, all illuminated for quick and easy control. Surge and lightning protection up to 19.500 A to protect all devices connected, e.g. against indirect lightning strikes. Integrated HF-filter against high-frequency failure. 4-fold USB-Hub 2.0 to connect additional USB-devices. USB-cable included. Childproof sockets. In colourful display-packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Measurements: 38 x 30 x 6 cm Socket: 6 Nominal current: 16 A Interference filter: EMI/RFI USB-ports: 4 Plug-in system: DE

The term inline filter refers to an expandable, bolted, modular system. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 10,000–300,000 m³/h. RS / RX filter The RS / RX series are a proven, expandable, modular system with low-pressure purge-air cleaning. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is 2.85 m wide. Filter hose lengths of 3 m (standard) and 4 m are available for this. The RSEC series has been designed for smaller air quantities and for above-roof installation. This series has a housing width of 2.4 m and 2 m-long filter hoses. The filter hoses are manufactured from polyester needle felt; the filtering direction is from the outside inwards. Filter cartridges and filter tubes are alternatively possible. The filter hoses are cleaned off using the material-preserving low-pressure purge-air system. The purging trolley inside the clean air compartment drives over the hose openings either continuously or controlled by pressure. In the direction of movement the first filter hose row is neutralised, while the second row is flushed from the clean air side. The third row is likewise neutralised. This results in a draught delay, which is necessary in order to allow the dislodged dust to fall into the discharge. The dust is discharged by a tried-and-tested drag conveyor with a downstream cellular wheel sluice. The return air pipes are provided with fire protection flaps and switching devices for exhaust air operation. The filter housing has been tested for resistance to pressure surges. Standard safety devices include likewise tested explosion pressure relief devices, fire extinguishing systems, mechanical and thermal monitoring systems as well as pressure-surge-resistant and flameproof cellular wheel sluices. The transport fan is arranged on the clean air side and is not exposed to swarf and dust. Hence, the conditions of a dust explosion zone do not prevail in the transport fan. RSV/RXV filter This series essentially differs from the RS/RX series in that its fans are arranged on the clean air side. RSV/RXV filters are suitable only for vacuum pressure operation. The capacity range extends from approx. 20,000 - 300,000 m³/h. The filter hoses are likewise cleaned off using the material-preserving low-pressure purge-air system.

For comfortably switching electrical devices and lamps up to 1000 W ON and OFF; for use outdoors. 2 Outlet adapter with wireless receiver for outdoors IP 44. Switch position indicator on the receiver; can also be operated manually. Simple and flexible use by means of self-teaching coding. Fail-safe due to more than 65,000 different codes. Continuous storage of the coding even in the event of a longer power failure. 4-channel manual transmitter for simultaneous universal operation of individual or multiple receivers. Switching capacity 1.000 W. Range up to 25 Meters (Frequency 433.92 MHz). 3 V battery (type CR2032) for remote control included. Childproof sockets. In blister packaging. Battery type: 1 x CR2032 Scope of delivery: 1 x 4 channel sender, 2 x remote receivers sockets IP 44

Switch your radio relay receiver on and off comfortably with your smartphone in a WLAN enviroment. The clever way to start with home automation. Conveniently and comfortably switched connected devices on and off from your couch from your smartphone e.g.: - Indoor/outdoor lighting - Entertainment electronics - Garden pond pump - Fans - Christmas lights etc. Control the 433 MHz wireless relay receiver. Simple operation via a SteckerPRO app (available for iOS and Android). The gateway is the link between your electrical devices and your home network (WLAN router). Compatible for example with the SteckerPRO App (www.steckerpro.com). To switch your connected devices on and off on the go you will need a standard vpn connection. The remote receivers sockets have a switching capacity 1.000 W and a work up to a distance of 25 meters. Package contents: Gateway 433 MHz, power supply, 1.8 m USB cable, 2 x remote receivers socket, 1 m network cable, antenna. System requirements:...

Switch your radio relay receiver on and off comfortably with your smartphone in a WLAN enviroment. The clever way to start with home automation. Conveniently and comfortably switched connected devices on and off from your couch from your smartphone e.g.: - Indoor/outdoor lighting - Entertainment electronics - Garden pond pump - Fans - Christmas lights etc. Control the 433 MHz wireless relay receiver. Simple operation via a SteckerPRO app (available for iOS and Android). The gateway is the link between your electrical devices and your home network (WLAN router). Compatible for example with the SteckerPRO App (www.steckerpro.com). To switch your connected devices on and off on the go you will need a standard vpn connection. Package contents: Gateway 433 MHz, power supply, 1.8 m USB cable, 1 m network cable, antenna. System requirements: Smartphone/tablet with iOS or Android, home network with WLAN and ethernet, DHCP router. In colourful display-packaging.

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

Test Couplings with piston valve for: ▪ Hydraulic applications with low-viscosity fluids (e.g. water, cooling lubricants, etc.) ▪ For high, pulsating pressures ▪ For customer philosophy “Soft sealing / non metal to metal seal” ▪ Pneumatic applications ▪ Filling (flow in opposite direction) SKK-FÜLL Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems ▪ Filling of accumulators (special filling-version) Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Please pay attention to the sealing materials used) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Working Pressure ▪ Max. working...

Test Couplings with piston valve for: ▪ Hydraulic applications with low-viscosity fluids (e.g. water, cooling lubricants, etc.) ▪ For high, pulsating pressures ▪ For customer philosophy “Soft sealing / non metal to metal seal” ▪ Pneumatic applications ▪ Natural gas applications with DVGW requirement SKK-DVGW ▪ Other gas applications without DVGW requirements SKK-GAS ▪ Filling (flow in opposite direction) SKK-FÜLL Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems ▪ Filling of accumulators (special filling-version) Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Please pay attention to the sealing materials used) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of...