Design supply - Import export

Profitable turn-key systems Accuracy, reliability and throughput are essential for the success of any material handling in industrial processes. Lödige Industries provides integrated solutions for an efficient material flow from goods-in, through the production process and goods-out, including tracking and stock control functions throughout. We plan, install and commission these solutions and provide an effective life-cycle service support to strengthen your competitive edge. Working closely with our customers we plan, simulate and implement conveyor solutions and turn them into profitable turn-key systems. Thanks to our industry-specific expertise, we optimise your material flow operations, increase the performance of your system and help to reduce operating costs significantly. We are unique in providing the complete solution with in house expertise: System analysis, planning, design, manufacture and supply of material handling systems, management software, installation, commissi

The induction generator is designed to supply up to 4 induction coils (inductors) with a power of up to 7.5 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

This is the most installed version of the fabric expansion joints (KOREMA® type A3 or AC3 as well as B3 or BC3). The name »flange-type« is used for expansion joints located between pipe or duct end flanges. For existing plants, the flange design varies according to customers’ requirements or depending on the constructed steel design. For innovative designs KOREMA® will identify the suitable technical and economical solution. Special design: supplied as »open« multilayer expansion joint. On-site service available exclusively from the KOREMA® service team. Insulation is incorporated to protect the expansion joint against abrasion as well as for thermal insulation. The choice of insulating material, either mineral wool or ceramic felt, depends on the design temperature. For operation at or below dew point, a vulcanized elastomeric layer is available. Pre-assembled units, complete with liners and clamp bars, are available.

The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.

Electrical process flow heaters The “STR-TWIN type electrical heater comprise a large range of process flow heaters for industrial application custom built to meet client specification. Due to the small diameter construction of the vessel it is perfectly suitable for low volume or mass flow. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

In addition to the furniture industry, we also supply wood designer pieces to shopfitters, the commercial construction industry, shipbuilders and large interior finishers. We also make custom pieces such as premiumquality wooden lamps or vases to give you tailored solutions that match your specific requirements.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

EEx’e’ certified electrical process flow heaters EEx e T1 – T6 ATEX The “STR-Exe” type electric process flow heaters are EEx e certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The “STR-Exe type electrical process flow heater comprise a large range for industrial application. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

The AViTEQ Vobtronic units are fully equipped controllers for the operation of vibrators. About a variety of standard features and special designs the controllers can be used in many different industries and variable to adapt to the work environment. VIBTRONIC® -controllers are designed to supply AC voltage to control magnetic vibrators. They operate according to the principle of voltage control (phase-fired control). For all standard voltages in the 50 and 60 Hz main supply, AViTEQ has a suitable controller available in either a built-in or housing design. The controllers have voltage compensation for fluctuations in the main supply and some models have a limited control that rotects the magnetic vibrator from impact. The setpoint specification can be set using a potentiometer or an external setpoint (0-10 VDC or 0/4-20 mA). Information regarding operational status can be read from the integrated status relay and LEDs. Depending on the model, a vibrator current up to 100 A is possib

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Our ink supply systems are designed to reliably deliver our ink formulations and cleaners to ensure optimal performance. With our advanced ink circulation technology and our bulk ink options reduce waste and cost-per-mark, letting you do more for less.

Plate Precoat Filter are used for the fine filtration of low-viscosity oils. This cost-effective filter is a compact device designed to supply individual machines. The achievable filtration fineness is between 1 and 5 µm in NAS 3-7. The filter regeneration and cleaning of the filter discs are done manually. Advantages: Small footprint Excellent filtration results Low installation effort The filter geometry can be customized to match the machining machine (on request) Affordable price Operating Principle: Swelling: The entire tank is filled with oil. Before filtration can begin, the filter discs (1) need to be swollen with a filter aid (diatomaceous earth, cellulose, perlite). Filtration: After the precoat, the operator manually switches to filtration and directs the filtrate into the clean tank (2). The system pump can now be switched on to supply the processing machine. The achievable filtration fineness is 1 – 5 µm, depending on the filter aid used.

When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. — Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions — High steam quality, excellent dynamics, full flexibility — Reduced expenditure: No flue gas, no fuel supply — Application-specific design and particularly reliable operation — Smart boiler control and seamless system integration — System equipment and service from a single source

Two independent firing units and flue gas paths offer very high flexibility in the ZFR thanks to a doubled modulation range. — Very high efficiency across the entire power range — Reliable solution for highly fluctuating steam demand — Project-specific equipment and optional components, for example superheated steam generation — Future-proof with options for low-NOx and CO2-neutral operation — Smart boiler control and seamless system integration — Stable supply and durable design Made in Germany

With impressively low emissions and its ability to be converted for biofuels or hydrogen, the UL-S is designed to be future-proof. — Very high efficiency for low running costs and emissions — Complete system with customer-specific equipment and future-proof technology — Extremely well proven design “Made in Germany”, highly durable and easy to maintain — Consistent steam quality for reliable supply — Custom designs available for heat recovery boilers, hybrid or superheated steam — Smart boiler control and seamless system integration with digital assistants

Acceleration test: The acceleration test is based on a slide-crank mechanism with a flywheel as the crank. The crank imparts high acceleration and speed to the block with finite stroke. By adjusting the rotational speed of the motor, the service life of the block can be determined at different accelerations and speeds. — Both downward-bolt and upward-bolt track rails available — High rigidity structure — Reduced lubrication requirements for environmental soundness and maintenance cost saving — Built-in lubricant storage and supply system — Dustproof design Standard seals (S) — Reinforcement plate design (Patented)

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

Twopole and singlepole auxiliary voltage transformers designed to supply control cubicle with low voltage power.

Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set

ProTec designs and supplies innovative solid-state polymer post-condensation lines and complete PET bottle flake recycling lines. The batch tumble reactor which combines homogeneous mixing with short processing times is the keystone of the line. The IV value (intrinsic viscosity as a yardstick for molar mass) of polyesters (PET, PBT, PTT etc.) and of polyamides (PA6, PA66 etc.) can be purposefully increased by precise control of temperature, vacuum and processing time, with or without defined addition of auxiliaries.