De-aeration - Import export

Optigrun Aeration Substrate U-heavy is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with high load capacity; high build-up.

Optigrun Aeration Substrate U-light is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with low load capacity; higher build-up.

These are the parts used in ventilation system.Used for urban building ventilation, household product ventilation and other products.

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and diameters of up to 250mm are possible. In our prototype department, we are able to simulate or modify the environmental circumstances of the fan wheels or turbines, thus achieving optimal operational conditions. Furthermore, we carry out mould-flow analysis, use ANSYS from external partners for the flow simulation and establish the fault probability and fault effect with FPFEs. New: Development of blower systems and optimization of ventilation systems.

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

We produce for the martitim needs: railings, tubes, handrails, fittings, stairs, floors, rope tensioner, shroud spanner, skirting boards, aeration, lifting rings, clamps, rod holders, anchors, big-sized parts, angles, tees, safeguarding, thimbles, pressing sleeves and much more... Take profit also from our 3D-printign service for plastic & silicon parts. We realize your individual demans!

The continuous product flow from the filling chamber is ensured by the fluidization air quantities being adjustable to your product. For compact bag shapes the special BEHN + BATES filling de-aeration nozzle removes the air from the bag already during filling.

The continuous product flow from the filling chamber is ensured by the fluidization air quantities being adjustable to your product. For compact bag shapes the special BEHN + BATES filling de-aeration nozzle removes the air from the bag already during filling.

In the treatment of drinking water, whether done conventionally or via seawater desalination, agitators are used for rapid mix, precipitation and flocculation processes. Precipitation and flocculation processes require low shear, slow-running agitators. For pH adjustments and rapid mixing faster running agitators that can blend reactor content in a flash are required. Wastewater treatment also requires a multitude of application options for agitators. In anaerobic and anoxic tanks for nitrogen removal, slow-running agitators are used to suspend and homogenize activated sludge flocs. In aeration tanks, mixer/aerators can be used for efficient oxygenation and mixing. Where waste water is purified, sludge is generated. This sludge is generally conditioned using polymers, dewatered, and then digested in anaerobic sludge digesters to generate biogas. Special agitators are required for both polymer introduction and for digested sludge mixing.

With the heat pumps from FrigorTec, the energy of a warm aeration / gas removal or waste water is usually exploited. This is often the case in large kitchens, hospitals or the like. But FrigorTec also offers heat pump series, which come into use in building technology and are used effectively to heat residential or commercial buildings.

The ventilation dryers of the GRANIVENT™ series are the ideal supplement to GRANIFRIGOR™ grain dryers. They are used to aerate the grain immediately after harvesting. Subsequent cooling with a GRANIFRIGOR™ ensures that the grain is not damaged by insects or fungi. Fields of application > Optimal grain protection against warm or humid air > Standard medium pressure version - also ideal for tower silos

The fan provides a permanent air circulation that keeps the robot dry. The volume of air is renewed preventing moisture from condensing inside the cover.

Steel mesh constructions from WDM Deutenberg save stability of your construction plans from the inside. Our reinforcement meshes are greatly proven, e.g. for aerated concrete, reinforced concrete or floor fill concrete.

For large quantities of air with a low pressing force. Axial fans Axial fans are used wherever large quantities of air need to be moved with a low pressing force. They are frequently used for the aeration and ventilation of rooms. Axial fans can also be used for the cooling of rotary kilns in cement works.

For series production. Continuous flow dryer Continuous flow dryers are used wherever components need to be dried during transport in series production. Regardless of whether an adhesive water dryer, a paint dryer or a powder enamelling furnace is required, Rippert offers a wide range of heating and aeration options. Special air-locks or air circulation systems ensure low heat losses. IR zones can also accelerate the drying result or reduce the necessary energy quantities.

Ventilation dome Over-roof aeration with large free ventilation cross section

Product advantages — hygiene-compliant in accordance with VDI 6022 in conjunction with optional ePM10 >50% filter — market-leading quiet and nevertheless enormous outputs, at high speed ranges — short delivery times — easy to install — fully automatic KaControl or connection to an existing, external building automation system — customisation for projects and customers, even small quantities - wide range of options Clean air with H14 Hepa filter The adjustable Venkon Hepa filter box can be used to switch the Venkon to air cleaning mode in which 99.995 % all viruses, bacteria, germs and aerosols are drawn out of the air. The great benefit is that this can be done on demand. Create space Concealed in shallow ceilings or wall-voids or exposed with space-saving aesthetically designed casings, we create your special solution. Field of application Hotels, office buildings, retail chains and sales floors.

Each unit is custom designed and manufactured according to the client’s requirements. There are a wide variety of solutions, ranging from one to three vessel systems; from manual control to fully automated. Common characteristics of our projects include: - Unparalleled quality and craftsmanship for absolute reliability and durability - Easy operation and maintenance - Flawless design of the aeration and cleaning systems - Efficient and reliable insulation and cladding - The highest quality standards for creating an attractive appearance of the unit’s shape and surfaces

With a size of 400 x 200 x 600 mm is the AP07A the smallest module from our company. It draws air on both sides and blows it out on top of the device to the room. The 7-stage filtration passes through a pre-filter, catalyst filter, formaldehyde filter, activated carbon filter, HEPA filter, sterilizing UV light and an anion purifier. It can clean the air from virus, bacteria, pollen, and all other harmful particles in air, and also can reduce the odor in air at the same time. The AP07A is designed for a room size of approximate 45 m². Description Product NameAP07A Air purifier Voltage220 V- 240 V, 50 Hz Power30 W – 85 W CADR (Clean Air Delivered Rate)350 m3 / h Weight9,8 kg Product Size400 x 200 x 600 mm Filter1. Vorfilter 2. Katalysatorfilter 3. HEPA Filter Main FunctionAir filtering, Sterilization with UV Light, Anion release The CADR value of AP07A reaches 355 m3 / h, and has a Formaldehyde CADR 81.5 m3 / h. AP07A has a light senser function build-in the device.

Product NameAP09C Air Purifier Voltage200 V- 240 V, 50 Hz Power30 W – 75 W CADR (Clean Air Delivered Rate)600 m3 / h Weight10,9 kg Product479 x 269 x 717 mm Filter1.Vorfilter 2.HEPA Filter Main FunctionAir filtering, Anion release The CADR value of AP09C reaches 600 m3/h, and has a Formaldehyde CADR 390 m3/h. It has a high speed smoke purification function. In the automatic mode, pressing speed smoke purification, the machine runs at highest level. Allowing maximum efficiency of purification of device. Description With a size of 479 x 269 x 717 mm, AP09C is designed for middle size rooms. It draws in the air from both sides and blows the filtered air on top of the device to the room. The 5-stage filtration passes through a pre-filter, formaldehyde filter, activated carbon filter, HEPA filter and generates negatively charged ions. The air is freed from viruses, bacteria, pollen and all other harmful particles, as well as unpleasant odors.

With its modern design and effective filter function, the Air Protector One is designed specifically for large rooms. It features a touchscreen, and a companion app, which can be used for controlling and pre-programming. Description Product NameAir Protector One Voltage220 V – 240 V, 50 Hz Power30 W – 85 W CADR (Clean Air Delivered Rate)800 m3 / h Weight14 kg Product Size400 x 400 x 669 mm Filter1. Pre-filter 2. HEPA 14 filter 3. (activated)Carbon filter Main FunctionAir filtering, Anion release The Air Protector One air purifier filters the air by drawing air into the unit from two sides via an integrated fan. Then the filtered air flows back into the room from above to achieve optimal circulation. Air Protector One uses 4-stage filtration including HEPA 14 double filter on two sides and captures all particles larger than 3 nm from the air with an efficiency of 99.995%.

Safe blowing off of dust particles on work clothes by means of controlled compressed air in 30 seconds

Biyovent, the intensive care type mechanical ventilator device, has been designed for patients who cannot breathe by themselves or who have di culty in breathing. Biyovent, which was actualized for the purpose of o ering products with a high technological threshold value, fully meets the needs with its new generation technology. It o ers high-quality for both technology and health thanks to its characteristics that cover all the deficits that the ventilators used so far cannot o er and cannot meet the demands of doctors. Integrated Nebulizer High Flow Oxygen Therapy and N-CPAP (nasal C-PAP) Suitable for Pediatric, Adult and Newborn (Optional) Patients Smart Ventilation Modes