Da lv - Import export

With a cutting depth of 190 mm and a Ø 500 diamond blade, this cutter is perfect for all your needs. Its adjustable handle ensures low vibrations and an ergonomic working position. Due to his ideal weight distribution the FS 400 LV provides excellent stability during cutting.

Highly concentrated superplasticizer for high-quality precastand ready-mix concrete, prestressed concrete, high-strength concrete, self compacting concrete (SCC), high slump concrete with very low w/c-ratio. Very strong increase of workability and/or reduction of w/c-ratio, very high early - and final strength, excellent flowability also with high powder contents and use of silicafume.

Bat cable 48V with 50 mm² cross-section and M8-BYD LVS connector

The PID 110 is a proportional-integral-differential regulator for frequency stabilization of tunable diode lasers (DL pro, DFB pro). It accomplishes side-of-fringe locking to the slope of an atomic line or a cavity transmission peak. The module works both for HV (piezo actuators) and LV (laser current) control tasks. Users can adjust all relevant parameters, including P, I and D contributions, set point and regulator output range.

Most suitable for handling electronic parts such as ICs and LSIs. Also precise micro parts such a s watches, chemicals and other small parts. MH100A is composed of Vacuum Pump Unit Linicin Model LV125A including 1 pc. of Micro Cupla MC04PH

The traditional ALLFILM system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure. In our MSD™ medium voltage capacitors, we are using the metallised polypropylene so well known from LV power factor correction. Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress at the edges of the ALLFILM flat packs.

Polyplast Müller develops special, PPbased compounds with outstanding properties. Our tailormade, highperformance compounds are available for many applications including UL 758 (90°C + 105°C) LV 112 / ISO 6722T3 class C ABS – ESP sensor cables Compounds for drag chain cables with high reverse bending resistance

SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE S 720 Universal AIRLESS spraygun S 720/250 up to 250 bar S 720/500 up to 500 bar S 720/LV to be equipped with standard airless nozzles or in LV version for extrusion nozzles standard supply: - filter - 1/4” swivel safety devices: trigger lock trigger guard

SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø