Cylinder design - Import export

high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle

Pneumatic special cylinder in tandem design with two separately controllable chambers and different strokes. Piston rods with anti-twist protection. Complete with connection elements for free suspension according to customer specifications.

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. These one-way restrictors can be screwed directly into the ports of miniature valves or cylinders. They are designed as inlet or outlet restrictors and do have either tube nipple connection including nut or push-in fittings.

Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. These one-way restrictors can be screwed directly into the ports of miniature valves or cylinders. They are designed as inlet or outlet restrictors and do have either tube nipple connection including nut or push-in fittings.

The MBS hydraulic cylinder MZR-1008 is designed as a discharge cylinder of direct support systems on mobile devices, such as Cranes have been constructed. The integrated position measuring system enables the exact position of the support cylinder to be detected. This is hydraulically fixed in connection with the piped double check valve. The cylinder connection is via plain bearing bushes. There are connecting bores for pipe fittings according to BSPP ISO1179-2 in the valve block. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for...

The MBS hydraulic cylinders of the MZR-1021 series are designed as differential cylinders for applications with high quality requirements in stationary mechanical engineering. All cylinders work with low friction and are characterized by a stick-slip free run. Hub and piston rod protrusions are variable selectable. The cylinder is connected via a head flange mounting with centering shoulder and a threaded shoulder on the piston rod. There are connections for high pressure flanges to SAE 6.000 P.S.I as well as vent holes for a free installation position. With the exception of the piston rod and SAE flange surfaces, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy...

With around 160 years of manufacturing expertise in reciprocating compressors, BORSIG offers tailor-made horizontal and vertical compressor solutions for process gases with all auxiliary equipment (turnkey solutions). Our reciprocating compressors are driven either by electric motors, gas engines or steam turbines. They have been developed for heavy continuous operation with lubricated or non-lubricated cylinders. They comply with the design standards of API 618 (5th edition), API 11P/ ISO 13631 as well as other international and manufacturing standards. BORSIG reciprocating compressors stand for long life, high wear resistance and low life cycle costs.

Reliable and precise at a pressure difference of 0.01 bar The diaphragm pressure cylinders in EFFBE pneumatic devices work reliably even under the harshest conditions and with no stick-slip effect. The pneumatic cylinders in EFFBE pneumatic devices work reliably even under the harshest conditions and with no stick-slip effect. Even extreme environmental conditions can not affect the performance of our rugged pneumatic devices with diaphragm. EFFBE pneumatic cylinders operate precisely and reliably at a pressure difference of 0.01 bar. As sensitive pressure regulators, they guarantee precise control processes with no stick-slip effect, which as a rule can not be achieved with piston cylinders. Further advantages of diaphragm regulators: EFFBE actuating cylinders are of simple design, maintenance-free and require neither grease nor oil for operation.

Extremely high flow rates with the UHD K150000-5G quintuplex plunger pump - ideal for fracking and descaling. With a maximum drive power of 1500 kW, the K150000-5G high pressure pump is an extremely powerful high pressure pump. As a five-cylinder pump (quintuplex), it offers the possibility of pumping without inlet pressure in many applications. Its special five-cylinder design allows large volume flows without cavitation in the pump. Special Features: Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 0-100% depending on rod force dynamically balanced crankshaft Gearbox with external forced lubrication and oil cooling External gear ratios on request e.g. i = 4.76; 5.72; 6.3 Also available to API 674 Horizontal operation Special fluids such as seawater, glycol, methanol, oils, etc. on request.

With a maximum drive power of 1000 kW, the K100000-5G high pressure pump is an extremely powerful pump. As a five-cylinder pump (quintuplex), it offers the possibility of pumping without inlet pressure in many applications. Its special five-cylinder design allows high flow rates without cavitation in the pump. Like its smaller counterpart, the K55000-5G, it is used for larger jetting or hydraulic applications. Special Features Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force dynamically balanced gear Gear unit with forced lubrication and oil cooling gear ratios i = 3.40 - 4.10 - 4.69 - 5.19 - 6.03 Also available to API 674, including vertical operation Filtration up to 350 µm Special media such as seawater, glycol, methanol, oils etc. on request

Micro Cylinder with only 14 mm Cross-section The ultra-compact RCD micro cylinder is a rod type with a length of only 52 to 72 mm and a width of only 12 mm. The motor-driven micro cylinder is designed for applications with low load and power requirements. It can be used for short strokes, press mounting, lifting and lowering and many other applications. The micro linear cylinder with 24 VDC miniature motor for a maximum payload of 0.7 kg is available for stroke lengths of 10, 20 and 30 mm. The small 2.5 W motor has a rated thrust of 4.2 N and a speed of up to 300 mm/s at an acceleration of up to 9.81 m/s.

n the micro and micro-drive sector, IAI offers small mini slider types that easily replace pneumatic cylinders due to their identical design and simple control mode. They are suitable for mounting fixtures, workpiece positioning, table motion and many other applications. In the RCP3 series, the smallest models are available as a slider types with sliding spindle. The latest developments are the space-saving mini slider types of the RCA2 series with 24 V servo motor.

Application The K2000 cylinder head stand is designed to support automotive and motorcycle cylinder heads on a workbench so that service or repair jobs, such as valve work or head cleaning and assembly can be easily performed. Features The cylinder head clamped onto the K2000 can be rotated by 360° and may be fixed at any desired angular position. Therefore, assembly and disassembly work can be done with the cylinder head in the most appropriate position. An universal valve spring compressing lever is supplied to remove and install the valve springs.

Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.

You manufacture sensitive electronic products, such as power semiconductors, diodes, diesel injectors and components for medical equipment. For casting purposes, you need systems that guarantee perfection and absolute freedom from voids with minimum casting quantities. Our Micro Casting Systems: Accuracy: Absolutely error-free casting of the smallest quantities; casting quality tolerance less than 0.01 g. Flexibility: Suitable for highly filled, abrasive casting resins under vacuum or atmosphere. Control: Patented dosing control unit for plant and process monitoring; glass cylinder design also allows direct observation of the preparation process.Compatibility: Modular design; cell construction makes it ideal for integration into existing production lines.

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy gripping under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing: Re-greaseable steel bushing bearing Stable, torsion-resistant design using direct cylinder linkage

Hydraulic Cylinders We specialise in the customer-specific manufacture of single and double-acting hydraulic and pneumatic cylinders. Telescopic cylinders are also part of our production programme. We develop and design cylinders to customers prescribed boundary conditions or manufacture according to customer drawings provided. We develop and design cylinders to customers prescribed boundary conditions or manufacture according to customer drawings provided. Your wishes have priority - from the design to the final inspection: